[PATCH v4 0/2] Add DMIC slew rate controls

[PATCH v4 0/2] Add DMIC slew rate controls

[Seven Lee]

Determine DMIC slew rate via property setup.

Change:
V3 -> V4:
 - add "maximum: 7" description.

V2 -> V3:
 - Update description of DMIC slew rate and remove
   "selection" key words from property name
 - Corrected variable name of DMIC slew rate from c file

V1 -> V2:
 - Corrected description of DMIC slew rate.

Seven Lee (2):
  ASoC: dt-bindings: nau8821: Add DMIC slew rate.
  ASoC: nau8821: Add slew rate controls.

 .../devicetree/bindings/sound/nuvoton,nau8821.yaml       | 9 +++++++++
 sound/soc/codecs/nau8821.c                               | 7 +++++++
 sound/soc/codecs/nau8821.h                               | 3 +++
 3 files changed, 19 insertions(+)

-- 
2.25.1

[PATCH v4 1/2] ASoC: dt-bindings: nau8821: Add DMIC slew rate.

[Seven Lee]

Add input with DMIC slew rate controls.

Signed-off-by: Seven Lee <wtli@nuvoton.com>
---
 .../devicetree/bindings/sound/nuvoton,nau8821.yaml       | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
index 3e54abd4ca74..3380b6aa9542 100644
--- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@@ -89,6 +89,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 3072000
 
+  nuvoton,dmic-slew-rate:
+    description: The range 0 to 7 represents the speed of DMIC slew rate.
+        The lowest value 0 means the slowest rate and the highest value
+        7 means the fastest rate.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
   nuvoton,left-input-single-end:
     description: Enable left input with single-ended settings if set.
         For the headset mic application, the single-ended control is
@@ -127,6 +135,7 @@ examples:
             nuvoton,jack-insert-debounce = <7>;
             nuvoton,jack-eject-debounce = <0>;
             nuvoton,dmic-clk-threshold = <3072000>;
+            nuvoton,dmic-slew-rate= <0>;
             #sound-dai-cells = <0>;
         };
     };
-- 
2.25.1

Re: [PATCH v4 1/2] ASoC: dt-bindings: nau8821: Add DMIC slew rate.

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1620 bytes --]

On Tue, Nov 07, 2023 at 11:52:29AM +0800, Seven Lee wrote:
> Add input with DMIC slew rate controls.
> 
> Signed-off-by: Seven Lee <wtli@nuvoton.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

> ---
>  .../devicetree/bindings/sound/nuvoton,nau8821.yaml       | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
> index 3e54abd4ca74..3380b6aa9542 100644
> --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
> +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
> @@ -89,6 +89,14 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      default: 3072000
>  
> +  nuvoton,dmic-slew-rate:
> +    description: The range 0 to 7 represents the speed of DMIC slew rate.
> +        The lowest value 0 means the slowest rate and the highest value
> +        7 means the fastest rate.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 7
> +    default: 0
> +
>    nuvoton,left-input-single-end:
>      description: Enable left input with single-ended settings if set.
>          For the headset mic application, the single-ended control is
> @@ -127,6 +135,7 @@ examples:
>              nuvoton,jack-insert-debounce = <7>;
>              nuvoton,jack-eject-debounce = <0>;
>              nuvoton,dmic-clk-threshold = <3072000>;
> +            nuvoton,dmic-slew-rate= <0>;
>              #sound-dai-cells = <0>;
>          };
>      };
> -- 
> 2.25.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v4 2/2] ASoC: nau8821: Add slew rate controls.

[Seven Lee]

The patch supports DMIC clock slew rate controls.

Signed-off-by: Seven Lee <wtli@nuvoton.com>
---
 sound/soc/codecs/nau8821.c | 7 +++++++
 sound/soc/codecs/nau8821.h | 3 +++
 2 files changed, 10 insertions(+)

diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c
index 6e1b6b26298a..012e347e6391 100644
--- a/sound/soc/codecs/nau8821.c
+++ b/sound/soc/codecs/nau8821.c
@@ -1738,6 +1738,10 @@ static int nau8821_read_device_properties(struct device *dev,
 		&nau8821->dmic_clk_threshold);
 	if (ret)
 		nau8821->dmic_clk_threshold = 3072000;
+	ret = device_property_read_u32(dev, "nuvoton,dmic-slew-rate",
+		&nau8821->dmic_slew_rate);
+	if (ret)
+		nau8821->dmic_slew_rate = 0;
 
 	return 0;
 }
@@ -1797,6 +1801,9 @@ static void nau8821_init_regs(struct nau8821 *nau8821)
 		NAU8821_ADC_SYNC_DOWN_MASK, NAU8821_ADC_SYNC_DOWN_64);
 	regmap_update_bits(regmap, NAU8821_R2C_DAC_CTRL1,
 		NAU8821_DAC_OVERSAMPLE_MASK, NAU8821_DAC_OVERSAMPLE_64);
+	regmap_update_bits(regmap, NAU8821_R13_DMIC_CTRL,
+		NAU8821_DMIC_SLEW_MASK, nau8821->dmic_slew_rate <<
+		NAU8821_DMIC_SLEW_SFT);
 	if (nau8821->left_input_single_end) {
 		regmap_update_bits(regmap, NAU8821_R6B_PGA_MUTE,
 			NAU8821_MUTE_MICNL_EN, NAU8821_MUTE_MICNL_EN);
diff --git a/sound/soc/codecs/nau8821.h b/sound/soc/codecs/nau8821.h
index 00a888ed07ce..62eaad130b2e 100644
--- a/sound/soc/codecs/nau8821.h
+++ b/sound/soc/codecs/nau8821.h
@@ -236,6 +236,8 @@
 #define NAU8821_DMIC_SRC_MASK	(0x3 << NAU8821_DMIC_SRC_SFT)
 #define NAU8821_CLK_DMIC_SRC	(0x2 << NAU8821_DMIC_SRC_SFT)
 #define NAU8821_DMIC_EN_SFT	0
+#define NAU8821_DMIC_SLEW_SFT  8
+#define NAU8821_DMIC_SLEW_MASK (0x7 << NAU8821_DMIC_SLEW_SFT)
 
 /* GPIO12_CTRL (0x1a) */
 #define NAU8821_JKDET_PULL_UP	(0x1 << 11) /* 0 - pull down, 1 - pull up */
@@ -573,6 +575,7 @@ struct nau8821 {
 	int jack_eject_debounce;
 	int fs;
 	int dmic_clk_threshold;
+	int dmic_slew_rate;
 	int key_enable;
 };
 
-- 
2.25.1

Re: [PATCH v4 0/2] Add DMIC slew rate controls

[Mark Brown]

On Tue, 07 Nov 2023 11:52:28 +0800, Seven Lee wrote:
> Determine DMIC slew rate via property setup.
> 
> Change:
> V3 -> V4:
>  - add "maximum: 7" description.
> 
> V2 -> V3:
>  - Update description of DMIC slew rate and remove
>    "selection" key words from property name
>  - Corrected variable name of DMIC slew rate from c file
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: dt-bindings: nau8821: Add DMIC slew rate.
      commit: 1fb1a7c4a6328aff97eeca513fe7239099c13016
[2/2] ASoC: nau8821: Add slew rate controls.
      commit: 91d1a18b6381abd7a0137449fe345924072e4a32

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark