devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <marius.cristea@microchip.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <robh+dt@kernel.org>,
	<jdelvare@suse.com>, <linux@roeck-us.net>,
	<linux-hwmon@vger.kernel.org>
Cc: <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <marius.cristea@microchip.com>
Subject: [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X
Date: Wed, 15 Nov 2023 15:44:52 +0200	[thread overview]
Message-ID: <20231115134453.6656-2-marius.cristea@microchip.com> (raw)
In-Reply-To: <20231115134453.6656-1-marius.cristea@microchip.com>

From: Marius Cristea <marius.cristea@microchip.com>

This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
---
 .../bindings/iio/adc/microchip,pac1934.yaml   | 137 ++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..2609cb19c377
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  microchip,slow-io:
+    type: boolean
+    description: |
+      A GPIO used to trigger a change is sampling rate (lowering the chip power consumption).
+      If configured in SLOW mode, if this pin is forced high, sampling rate is forced to eight
+      samples/second. When it is forced low, the sampling rate is 1024 samples/second unless
+      a different sample rate has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description: |
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured. Value
+          is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: interrupts
+    then:
+      properties:
+        microchip,slow-io: false
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: microchip,slow-io
+      then:
+        properties:
+          interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pac193x: power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
-- 
2.34.1


  reply	other threads:[~2023-11-15 13:45 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-15 13:44 [PATCH v3 0/2] adding support for Microchip PAC193X Power Monitor marius.cristea
2023-11-15 13:44 ` marius.cristea [this message]
2023-11-16 15:01   ` [PATCH v3 1/2] dt-bindings: iio: adc: adding support for PAC193X Krzysztof Kozlowski
2023-11-16 18:21     ` Conor Dooley
2023-11-16 20:00       ` Krzysztof Kozlowski
2023-11-16 21:31         ` Conor Dooley
2023-11-25 19:47       ` Jonathan Cameron
2023-11-26 11:24         ` Conor Dooley
2023-11-26 16:04           ` Jonathan Cameron
2023-11-30 15:53             ` Conor Dooley
2023-11-15 13:44 ` [PATCH v3 2/2] iio: adc: adding support for PAC193x marius.cristea
2023-11-21 15:56   ` kernel test robot
2023-11-25 20:37   ` Jonathan Cameron
2023-11-15 19:38 ` [PATCH v3 0/2] adding support for Microchip PAC193X Power Monitor Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231115134453.6656-2-marius.cristea@microchip.com \
    --to=marius.cristea@microchip.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).