[PATCH 09/11] arm64: dts: qcom: sm6375: fix USB wakeup interrupt types

[Johan Hovold <johan+linaro@kernel.org>]

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375")
Cc: stable@vger.kernel.org      # 6.2
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm6375.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e7ff55443da7..b479f3d9a3a8 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1362,8 +1362,8 @@ usb_1: usb@4ef8800 {
 
 			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 93 IRQ_TYPE_EDGE_BOTH>,
+				     <GIC_SPI 94 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
-- 
2.41.0