* [PATCH 1/3] dt-bindings: arm: rockchip: Add Anbernic RG351V
2023-11-20 23:01 [PATCH 0/3] Add Support for Anbernic RG351V Chris Morgan
@ 2023-11-20 23:01 ` Chris Morgan
2023-11-21 7:31 ` Krzysztof Kozlowski
2023-11-20 23:01 ` [PATCH 2/3] arm64: dts: rockchip: Split RG351M from Odroid Go Advance Chris Morgan
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Chris Morgan @ 2023-11-20 23:01 UTC (permalink / raw)
To: devicetree
Cc: linux-rockchip, maccraft123mc, sebastian.reichel, heiko, conor+dt,
krzysztof.kozlowski+dt, robh+dt, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
The Anbernic RG351V is a portable gaming console from Anbernic with the
RK3326 SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5f7c6c4aad8f..3786f901a1a7 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -30,9 +30,11 @@ properties:
- const: amarula,vyasa-rk3288
- const: rockchip,rk3288
- - description: Anbernic RG351M
+ - description: Anbernic RK3326 Handheld Gaming Console
items:
- - const: anbernic,rg351m
+ - enum:
+ - anbernic,rg351m
+ - anbernic,rg351v
- const: rockchip,rk3326
- description: Anbernic RG353P
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/3] arm64: dts: rockchip: Split RG351M from Odroid Go Advance
2023-11-20 23:01 [PATCH 0/3] Add Support for Anbernic RG351V Chris Morgan
2023-11-20 23:01 ` [PATCH 1/3] dt-bindings: arm: rockchip: Add " Chris Morgan
@ 2023-11-20 23:01 ` Chris Morgan
2023-11-20 23:01 ` [PATCH 3/3] arm64: dts: rockchip: Add Anbernic RG351V Chris Morgan
2023-12-12 20:16 ` [PATCH 0/3] Add Support for " Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Chris Morgan @ 2023-11-20 23:01 UTC (permalink / raw)
To: devicetree
Cc: linux-rockchip, maccraft123mc, sebastian.reichel, heiko, conor+dt,
krzysztof.kozlowski+dt, robh+dt, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Split the RG351M into its own DTSI file. The RG351M, unlike the Odroid
Go Advance, has no ADC joysticks, no GPIO buttons (except for volume
on the RG351V), a PWM vibrator that interferes with an Odroid
regulator, and different LEDs. Split the RG351M into a DTSI file
that can then be imported into the DTS files for the RG351M and a
new RG351V.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../dts/rockchip/rk3326-anbernic-rg351m.dts | 18 +-
.../dts/rockchip/rk3326-anbernic-rg351m.dtsi | 478 ++++++++++++++++++
2 files changed, 480 insertions(+), 16 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
index ce318e05f0a6..f4d20f29c1b4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -6,30 +6,16 @@
*/
/dts-v1/;
-#include "rk3326-odroid-go.dtsi"
+#include "rk3326-anbernic-rg351m.dtsi"
/ {
model = "Anbernic RG351M";
compatible = "anbernic,rg351m", "rockchip,rk3326";
-
- vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm0 0 1000000 0>;
- pwm-names = "enable";
- };
};
-/delete-node/ &builtin_gamepad;
-/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
-
&internal_display {
compatible = "elida,kd35t133";
iovcc-supply = <&vcc_lcd>;
+ rotation = <270>;
vdd-supply = <&vcc_lcd>;
};
-
-&pwm0 {
- status = "okay";
-};
-
-/delete-node/ &rk817_charger;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
new file mode 100644
index 000000000000..89e64647b4fa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_bl>;
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ /*
+ * LED is a tri-state. Driven high it is red, driven low it is
+ * green, and not driven at all (pin set to input) it is amber.
+ * Additionally, there is a 2nd LED that is not controllable
+ * that is on (red) when plugged in to power.
+ */
+ gpio_led: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin>;
+
+ red_green_led: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_CHARGING;
+ };
+ };
+
+ rk817-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rk817_int";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Speaker", "SPKO";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
+ };
+ };
+
+ vccsys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v8_sys";
+ regulator-always-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm0 0 1000000 0>;
+ pwm-names = "enable";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+ assigned-clocks = <&cru PLL_NPLL>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+ assigned-clock-rates = <1188000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ internal_display: panel@0 {
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <16>;
+ i2c-scl-rising-time-ns = <280>;
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ #clock-cells = <1>;
+ clock-names = "mclk";
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clocks = <&cru SCLK_I2S1_OUT>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+ pinctrl-names = "default";
+ #sound-dai-cells = <0>;
+ wakeup-source;
+
+ vcc1-supply = <&vccsys>;
+ vcc2-supply = <&vccsys>;
+ vcc3-supply = <&vccsys>;
+ vcc4-supply = <&vccsys>;
+ vcc5-supply = <&vccsys>;
+ vcc6-supply = <&vccsys>;
+ vcc7-supply = <&vccsys>;
+ vcc8-supply = <&vccsys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <950000>;
+ regulator-name = "vdd_logic";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <950000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-name = "vdd_1v0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pmu";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vccio_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_bl: LDO_REG7 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_bl";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lcd: LDO_REG8 {
+ regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-name = "vcc_lcd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ vcc_wifi: LDO_REG9 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ usb_midu: BOOST {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5400000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_midu";
+ };
+ };
+
+ rk817_codec: codec {
+ rockchip,mic-in-differential;
+ };
+ };
+};
+
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sfc {
+ #address-cells = <1>;
+ pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+ pinctrl-names = "default";
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "disabled";
+ };
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m1_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&pinctrl {
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ led_pin: led-pin {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dc_det: dc-det {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+ };
+ };
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/3] arm64: dts: rockchip: Add Anbernic RG351V
2023-11-20 23:01 [PATCH 0/3] Add Support for Anbernic RG351V Chris Morgan
2023-11-20 23:01 ` [PATCH 1/3] dt-bindings: arm: rockchip: Add " Chris Morgan
2023-11-20 23:01 ` [PATCH 2/3] arm64: dts: rockchip: Split RG351M from Odroid Go Advance Chris Morgan
@ 2023-11-20 23:01 ` Chris Morgan
2023-12-12 20:16 ` [PATCH 0/3] Add Support for " Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Chris Morgan @ 2023-11-20 23:01 UTC (permalink / raw)
To: devicetree
Cc: linux-rockchip, maccraft123mc, sebastian.reichel, heiko, conor+dt,
krzysztof.kozlowski+dt, robh+dt, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the Anbernic RG351V, which is a handheld gaming console
from Anbernic with an RK3326 SoC, a 640x480 LCD display, a single
analog joystick with several face buttons, two USB C ports, and
internal WiFi over USB. All hardware has been tested as working
except for the battery, which will require further modification to the
mainline rk817 battery driver before it can be used (the device was
built without a shunt resistor, and as such the battery cannot
measure current; only voltage).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3326-anbernic-rg351v.dts | 44 +++++++++++++++++++
2 files changed, 45 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a18f33bf0c0e..0ac27cf782d7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
new file mode 100644
index 000000000000..c2f9b56ca5f9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3326-anbernic-rg351m.dtsi"
+
+/ {
+ model = "Anbernic RG351V";
+ compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+ gpio_keys_vol: gpio-keys-vol {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button-vol-down {
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ };
+
+ button-vol-up {
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&internal_display {
+ compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+ vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+ vccio1-supply = <&vccio_sd>;
+};
+
+&vcc_sd {
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+ regulator-max-microvolt = <1800000>;
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 6+ messages in thread