[PATCH 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Sort ufs node

[Jianhua Lu <lujianhua000@gmail.com>]

ufs node isn't in a right place, 'f' is front of 's', so move it to
above usb node.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
 .../dts/qcom/sm8250-xiaomi-elish-common.dtsi  | 32 +++++++++----------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 3d4ea428e4cb..3de7cb918448 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -657,6 +657,22 @@ &tlmm {
 	gpio-reserved-ranges = <40 4>;
 };
 
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
 &usb_1 {
 	/* USB 2.0 only */
 	qcom,select-utmi-as-pipe-clk;
@@ -678,22 +694,6 @@ &usb_1_hsphy {
 	status = "okay";
 };
 
-&ufs_mem_hc {
-	vcc-supply = <&vreg_l17a_3p0>;
-	vcc-max-microamp = <800000>;
-	vccq-supply = <&vreg_l6a_1p2>;
-	vccq-max-microamp = <800000>;
-	vccq2-supply = <&vreg_s4a_1p8>;
-	vccq2-max-microamp = <800000>;
-	status = "okay";
-};
-
-&ufs_mem_phy {
-	vdda-phy-supply = <&vreg_l5a_0p88>;
-	vdda-pll-supply = <&vreg_l9a_1p2>;
-	status = "okay";
-};
-
 &venus {
 	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
 	status = "okay";
-- 
2.41.0