devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Elder <elder@linaro.org>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org, andersson@kernel.org,
	konrad.dybcio@linaro.org, agross@kernel.org
Cc: mka@chromium.org, quic_cpratapa@quicinc.com,
	quic_avuyyuru@quicinc.com, quic_jponduru@quicinc.com,
	quic_subashab@quicinc.com, elder@kernel.org,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] arm64: dts: qcom: sm8550: add IPA information
Date: Fri, 24 Nov 2023 12:17:17 -0600	[thread overview]
Message-ID: <20231124181718.915208-2-elder@linaro.org> (raw)
In-Reply-To: <20231124181718.915208-1-elder@linaro.org>

Add IPA-related nodes and definitions to "sm8550.dtsi", which uses
IPA v5.5.

Signed-off-by: Alex Elder <elder@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 39 ++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7bafb3d88d69b..4d28150c985b5 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1995,6 +1995,45 @@ gpucc: clock-controller@3d90000 {
 			#power-domain-cells = <1>;
 		};
 
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
-- 
2.34.1


  reply	other threads:[~2023-11-24 18:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-24 18:17 [PATCH 0/2] arm64: dts: qcom: enable IPA on sm8550 Alex Elder
2023-11-24 18:17 ` Alex Elder [this message]
2023-11-24 18:17 ` [PATCH 2/2] arm64: dts: qcom: sm8550-qrd: enable IPA Alex Elder
2023-11-27 11:14 ` [PATCH 0/2] arm64: dts: qcom: enable IPA on sm8550 neil.armstrong
2023-12-08  2:57 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231124181718.915208-2-elder@linaro.org \
    --to=elder@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=elder@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=quic_avuyyuru@quicinc.com \
    --cc=quic_cpratapa@quicinc.com \
    --cc=quic_jponduru@quicinc.com \
    --cc=quic_subashab@quicinc.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).