[net-next RFC PATCH v2 02/11] dt-bindings: net: document ethernet PHY package nodes

[Christian Marangi <ansuelsmth@gmail.com>]

Document ethernet PHY package nodes used to describe PHY shipped in
bundle of 4-5 PHY. These particular PHY require specific PHY in the
package for global onfiguration of the PHY package.

Example are PHY package that have some regs only in one PHY of the
package and will affect every other PHY in the package, for example
related to PHY interface mode calibration or global PHY mode selection.

The PHY package node MUST declare the base address used by the PHY driver
for global configuration by calculating the offsets of the global PHY
based on the base address of the PHY package.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../bindings/net/ethernet-phy-package.yaml    | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy-package.yaml

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
new file mode 100644
index 000000000000..943952749b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Package Common Properties
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com
+
+select:
+  properties:
+    $nodename:
+      pattern: "^ethernet-phy-package(@[a-f0-9]+)?$"
+
+  required:
+    - $nodename
+
+properties:
+  $nodename:
+    pattern: "^ethernet-phy-package(@[a-f0-9]+)?$"
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description:
+      The ID number for the PHY.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  ^ethernet-phy(@[a-f0-9]+)?$:
+    $ref: /schemas/net/ethernet-phy.yaml#
+
+required:
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy-package@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            ethernet-phy@0 {
+              compatible = "ethernet-phy-ieee802.3-c22";
+              reg = <0>;
+            };
+
+            phy4: ethernet-phy@4 {
+              compatible = "ethernet-phy-ieee802.3-c22";
+              reg = <4>;
+            };
+        };
+    };
-- 
2.40.1