From: Fabio Estevam <festevam@gmail.com>
To: sakari.ailus@linux.intel.com
Cc: rfoss@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
mchehab@kernel.org, laurent.pinchart@ideasonboard.com,
devicetree@vger.kernel.org, linux-media@vger.kernel.org,
Fabio Estevam <festevam@denx.de>
Subject: [PATCH 2/2] media: dt-bindings: Use bus-types definitions from video-interfaces.h
Date: Sun, 26 Nov 2023 09:53:20 -0300 [thread overview]
Message-ID: <20231126125320.4024456-2-festevam@gmail.com> (raw)
In-Reply-To: <20231126125320.4024456-1-festevam@gmail.com>
From: Fabio Estevam <festevam@denx.de>
To improve readability, replace hardcoding numerical constants with the
corresponding definitions from video-interfaces.h.
Based on commit c4cfd47eb4ac ("media: dt-bindings: Use new video interface
bus type macros in examples").
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
.../devicetree/bindings/display/bridge/analogix,anx7625.yaml | 3 ++-
.../devicetree/bindings/media/i2c/toshiba,tc358746.yaml | 3 ++-
Documentation/devicetree/bindings/media/microchip,csi2dc.yaml | 4 +++-
.../devicetree/bindings/media/starfive,jh7110-camss.yaml | 4 +++-
.../devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml | 3 ++-
5 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index a1ed1004651b..e18cc0e8a520 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -132,6 +132,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
i2c {
#address-cells = <1>;
@@ -157,7 +158,7 @@ examples:
reg = <0>;
anx7625_in: endpoint {
remote-endpoint = <&mipi_dsi>;
- bus-type = <7>;
+ bus-type = <MEDIA_BUS_TYPE_DPI>;
data-lanes = <0 1 2 3>;
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
index 1c476b635b69..9e1874946017 100644
--- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
@@ -129,6 +129,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
i2c {
#address-cells = <1>;
@@ -161,7 +162,7 @@ examples:
remote-endpoint = <&sensor_out>;
hsync-active = <0>;
vsync-active = <0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
};
};
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
index b3a345fc6464..2e694479d82d 100644
--- a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -142,6 +142,8 @@ examples:
# Example for connecting to a parallel sensor controller block (video pipe)
# and the input is received from Synopsys IDI interface
- |
+ #include <dt-bindings/media/video-interfaces.h>
+
csi2dc@e1404000 {
compatible = "microchip,sama7g5-csi2dc";
reg = <0xe1404000 0x500>;
@@ -154,7 +156,7 @@ examples:
port@0 {
reg = <0>; /* must be 0, first child port */
csi2dc_in: endpoint { /* input from IDI interface */
- bus-type = <4>; /* MIPI CSI2 D-PHY */
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
remote-endpoint = <&csi2host_out>;
};
};
diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
index c66586d90fa2..4964e59c3ae3 100644
--- a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
+++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
@@ -120,6 +120,8 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/media/video-interfaces.h>
+
isp@19840000 {
compatible = "starfive,jh7110-camss";
reg = <0x19840000 0x10000>,
@@ -161,7 +163,7 @@ examples:
reg = <0>;
vin_from_sc2235: endpoint {
remote-endpoint = <&sc2235_to_vin>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
bus-width = <8>;
data-shift = <2>;
hsync-active = <1>;
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
index f762fdc05e4d..5fdb9ae758e3 100644
--- a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
@@ -58,6 +58,7 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/media/video-interfaces.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
ti_csi2rx0: ticsi2rx@4500000 {
@@ -90,7 +91,7 @@ examples:
csi2rx0_in_sensor: endpoint {
remote-endpoint = <&csi2_cam0>;
- bus-type = <4>; /* CSI2 DPHY. */
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
--
2.34.1
next prev parent reply other threads:[~2023-11-26 12:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-26 12:53 [PATCH 1/2] media: dt-bindings: media: Introduce MEDIA_BUS_TYPE_DPI Fabio Estevam
2023-11-26 12:53 ` Fabio Estevam [this message]
2023-11-27 22:40 ` [PATCH 2/2] media: dt-bindings: Use bus-types definitions from video-interfaces.h Rob Herring
2023-11-28 0:00 ` Laurent Pinchart
2023-11-28 0:31 ` Fabio Estevam
2023-12-01 12:16 ` Xin Ji
2023-11-27 22:39 ` [PATCH 1/2] media: dt-bindings: media: Introduce MEDIA_BUS_TYPE_DPI Rob Herring
2023-11-27 23:58 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231126125320.4024456-2-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@denx.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).