From: Shawn Guo <shawnguo@kernel.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Li Yang <leoyang.li@nxp.com>,
Marco Contenti <marco.c@variscite.com>,
Nate Drude <nate.d@variscite.com>,
FrancescoFerraro <francesco.f@variscite.com>,
Harshesh Valera <harshesh.v@variscite.com>
Subject: Re: [PATCH v2 4/4] arm64: dts: freescale: Add panel overlay for Variscite DART
Date: Mon, 27 Nov 2023 11:16:31 +0800 [thread overview]
Message-ID: <20231127031631.GY87953@dragon> (raw)
In-Reply-To: <20231025165058.31697-5-laurent.pinchart@ideasonboard.com>
On Wed, Oct 25, 2023 at 07:50:58PM +0300, Laurent Pinchart wrote:
> Add a DT overlay for the Variscite i.MX8MP DT8MCustomBoard that models
> the GKTW70SDAE4SE LVDS panel found in the evaluation kit.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
It doesn't apply to imx/dt64 branch, and I managed to manually apply it.
However, here is what I'm getting from 'make ARCH=arm64 dtbs'.
../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:54.3-16: Warning (reg_format): /fragment@1/__overlay__/touch@38:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:52.11-68.4: Warning (avoid_default_addr_size): /fragment@1/__overlay__/touch@38: Relying on default #address-cells value
../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:52.11-68.4: Warning (avoid_default_addr_size): /fragment@1/__overlay__/touch@38: Relying on default #size-cells value
arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtbo: Warning (graph_port): /fragment@3: graph port node name should be 'port'
../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:85.15-87.3: Warning (graph_endpoint): /fragment@3/__overlay__: graph endpoint node name should be 'endpoint'
../arch/arm64/boot/dts/freescale/imx8mp-var-dart-panel-gktw70sdae4se.dtso:85.15-87.3: Warning (graph_endpoint): /fragment@3/__overlay__: graph connection to node '/fragment@0/__overlay__/panel/port/endpoint' is not bidirectional
Shawn
next prev parent reply other threads:[~2023-11-27 3:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-25 16:50 [PATCH v2 0/4] arm64: dts: freescale: Add Variscite i.MX8MP DART8MCustomBoard v2 Laurent Pinchart
2023-10-25 16:50 ` [PATCH v2 1/4] dt-bindings: arm: fsl: Add Variscite DT8MCustomBoard with DART MX8M-PLUS Laurent Pinchart
2023-10-25 16:50 ` [PATCH v2 2/4] arm64: dts: freescale: Add support for the Variscite DART-MX8M-PLUS SoM Laurent Pinchart
2023-11-27 5:58 ` Ahmad Fatoum
2023-11-27 6:13 ` Ahmad Fatoum
2024-06-08 16:50 ` Laurent Pinchart
2024-06-08 16:18 ` Laurent Pinchart
2023-10-25 16:50 ` [PATCH v2 3/4] arm64: dts: freescale: Add support for the Variscite i.MX8MP DART8MCustomBoard Laurent Pinchart
2023-11-27 6:07 ` Ahmad Fatoum
2024-06-08 16:49 ` Laurent Pinchart
2023-10-25 16:50 ` [PATCH v2 4/4] arm64: dts: freescale: Add panel overlay for Variscite DART Laurent Pinchart
2023-11-27 3:16 ` Shawn Guo [this message]
2024-06-08 17:43 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231127031631.GY87953@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.f@variscite.com \
--cc=harshesh.v@variscite.com \
--cc=imx@lists.linux.dev \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marco.c@variscite.com \
--cc=nate.d@variscite.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).