From: Luca Weiss <luca@z3ntu.xyz>
To: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>
Subject: [PATCH 2/3] drm/msm/adreno: Add A305B support
Date: Thu, 30 Nov 2023 21:35:19 +0100 [thread overview]
Message-ID: <20231130-msm8226-gpu-v1-2-6bb2f1b29e49@z3ntu.xyz> (raw)
In-Reply-To: <20231130-msm8226-gpu-v1-0-6bb2f1b29e49@z3ntu.xyz>
Add support for the Adreno 305B GPU that is found in MSM8226(v2) SoC.
Previously this was mistakenly claimed to be supported but using wrong
a configuration.
In MSM8226v1 there's also a A305B but with chipid 0x03000510 which
should work with the same configuration but due to lack of hardware for
testing this is not added.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 15 ++++++++++++---
drivers/gpu/drm/msm/adreno/adreno_device.c | 15 +++++++++++----
drivers/gpu/drm/msm/adreno/adreno_gpu.h | 5 +++++
3 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a3xx_gpu.c b/drivers/gpu/drm/msm/adreno/a3xx_gpu.c
index c86b377f6f0d..5fc29801c4c7 100644
--- a/drivers/gpu/drm/msm/adreno/a3xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a3xx_gpu.c
@@ -134,6 +134,13 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
/* Set up AOOO: */
gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO_EN, 0x0000003c);
gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO, 0x003c003c);
+ } else if (adreno_is_a305b(adreno_gpu)) {
+ gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF0, 0x00181818);
+ gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF0, 0x00181818);
+ gpu_write(gpu, REG_A3XX_VBIF_OUT_RD_LIM_CONF0, 0x00000018);
+ gpu_write(gpu, REG_A3XX_VBIF_OUT_WR_LIM_CONF0, 0x00000018);
+ gpu_write(gpu, REG_A3XX_VBIF_DDR_OUT_MAX_BURST, 0x00000303);
+ gpu_write(gpu, REG_A3XX_VBIF_ROUND_ROBIN_QOS_ARB, 0x0003);
} else if (adreno_is_a306(adreno_gpu)) {
gpu_write(gpu, REG_A3XX_VBIF_ROUND_ROBIN_QOS_ARB, 0x0003);
gpu_write(gpu, REG_A3XX_VBIF_OUT_RD_LIM_CONF0, 0x0000000a);
@@ -230,7 +237,9 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
gpu_write(gpu, REG_A3XX_UCHE_CACHE_MODE_CONTROL_REG, 0x00000001);
/* Enable Clock gating: */
- if (adreno_is_a306(adreno_gpu))
+ if (adreno_is_a305b(adreno_gpu))
+ gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xaaaaaaaa);
+ else if (adreno_is_a306(adreno_gpu))
gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xaaaaaaaa);
else if (adreno_is_a320(adreno_gpu))
gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xbfffffff);
@@ -333,7 +342,7 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
AXXX_CP_QUEUE_THRESHOLDS_CSQ_IB1_START(2) |
AXXX_CP_QUEUE_THRESHOLDS_CSQ_IB2_START(6) |
AXXX_CP_QUEUE_THRESHOLDS_CSQ_ST_START(14));
- } else if (adreno_is_a330(adreno_gpu)) {
+ } else if (adreno_is_a330(adreno_gpu) || adreno_is_a305b(adreno_gpu)) {
/* NOTE: this (value take from downstream android driver)
* includes some bits outside of the known bitfields. But
* A330 has this "MERCIU queue" thing too, which might
@@ -559,7 +568,7 @@ struct msm_gpu *a3xx_gpu_init(struct drm_device *dev)
goto fail;
/* if needed, allocate gmem: */
- if (adreno_is_a330(adreno_gpu)) {
+ if (adreno_is_a330(adreno_gpu) || adreno_is_a305b(adreno_gpu)) {
ret = adreno_gpu_ocmem_init(&adreno_gpu->base.pdev->dev,
adreno_gpu, &a3xx_gpu->ocmem);
if (ret)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index f62ab5257e66..7028d5449956 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -55,10 +55,17 @@ static const struct adreno_info gpulist[] = {
.inactive_period = DRM_MSM_INACTIVE_PERIOD,
.init = a2xx_gpu_init,
}, {
- .chip_ids = ADRENO_CHIP_IDS(
- 0x03000512,
- 0x03000520
- ),
+ .chip_ids = ADRENO_CHIP_IDS(0x03000512),
+ .family = ADRENO_3XX,
+ .fw = {
+ [ADRENO_FW_PM4] = "a330_pm4.fw",
+ [ADRENO_FW_PFP] = "a330_pfp.fw",
+ },
+ .gmem = SZ_128K,
+ .inactive_period = DRM_MSM_INACTIVE_PERIOD,
+ .init = a3xx_gpu_init,
+ }, {
+ .chip_ids = ADRENO_CHIP_IDS(0x03000520),
.family = ADRENO_3XX,
.revn = 305,
.fw = {
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
index 80b3f6312116..c654f21499bb 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -247,6 +247,11 @@ static inline bool adreno_is_a305(const struct adreno_gpu *gpu)
return adreno_is_revn(gpu, 305);
}
+static inline bool adreno_is_a305b(const struct adreno_gpu *gpu)
+{
+ return gpu->info->chip_ids[0] == 0x03000512;
+}
+
static inline bool adreno_is_a306(const struct adreno_gpu *gpu)
{
/* yes, 307, because a305c is 306 */
--
2.43.0
next prev parent reply other threads:[~2023-11-30 20:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-30 20:35 [PATCH 0/3] Add GPU support for MSM8226 (Adreno A305B) Luca Weiss
2023-11-30 20:35 ` [PATCH 1/3] dt-bindings: display/msm: gpu: Allow multiple digits for patchid Luca Weiss
2023-12-01 8:18 ` Krzysztof Kozlowski
2023-11-30 20:35 ` Luca Weiss [this message]
2023-12-01 21:53 ` [PATCH 2/3] drm/msm/adreno: Add A305B support Konrad Dybcio
2023-12-25 21:12 ` Luca Weiss
2023-11-30 20:35 ` [PATCH 3/3] ARM: dts: qcom: msm8226: Add GPU Luca Weiss
2023-12-10 23:25 ` (subset) [PATCH 0/3] Add GPU support for MSM8226 (Adreno A305B) Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231130-msm8226-gpu-v1-2-6bb2f1b29e49@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
--cc=tzimmermann@suse.de \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).