devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Yan <andyshrk@163.com>
To: heiko@sntech.de
Cc: hjc@rock-chips.com, dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
	devicetree@vger.kernel.org, sebastian.reichel@collabora.com,
	kever.yang@rock-chips.com, chris.obbard@collabora.com,
	Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH v3 14/14] arm64: dts: rockchip: Add vop on rk3588
Date: Thu, 30 Nov 2023 20:25:11 +0800	[thread overview]
Message-ID: <20231130122511.13552-1-andyshrk@163.com> (raw)
In-Reply-To: <20231130122001.12474-1-andyshrk@163.com>

From: Andy Yan <andy.yan@rock-chips.com>

Add vop dt node for rk3588.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

(no changes since v1)

 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
 1 file changed, 96 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 7064c0e9179f..a9810ca78dc4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -362,6 +362,11 @@ spll: clock-0 {
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -474,6 +479,16 @@ sys_grf: syscon@fd58c000 {
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	vop_grf: syscon@fd5a4000 {
+		compatible = "rockchip,rk3588-vop-grf", "syscon";
+		reg = <0x0 0xfd5a4000 0x0 0x2000>;
+	};
+
+	vo1_grf: syscon@fd5a8000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x100>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
 		status = "disabled";
 	};
 
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma_lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		resets = <&cru SRST_A_VOP>,
+			 <&cru SRST_H_VOP>,
+			 <&cru SRST_D_VOP0>,
+			 <&cru SRST_D_VOP1>,
+			 <&cru SRST_D_VOP2>,
+			 <&cru SRST_D_VOP3>;
+		reset-names = "axi",
+			      "ahb",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+
+		status = "disabled";
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vop_mmu";
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;
-- 
2.34.1


      parent reply	other threads:[~2023-11-30 12:26 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-30 12:20 [PATCH v3 00/14] Add VOP2 support on rk3588 Andy Yan
2023-11-30 12:22 ` [PATCH v3 01/14] drm/rockchip: move output interface related definition to rockchip_drm_drv.h Andy Yan
2023-11-30 12:22 ` [PATCH v3 02/14] Revert "drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume" Andy Yan
2023-11-30 12:23 ` [PATCH v3 03/14] drm/rockchip: vop2: set half_block_en bit in all mode Andy Yan
2023-11-30 12:23 ` [PATCH v3 04/14] drm/rockchip: vop2: clear afbc en and transform bit for cluster window at linear mode Andy Yan
2023-11-30 12:23 ` [PATCH v3 05/14] drm/rockchip: vop2: Add write mask for VP config done Andy Yan
2023-11-30 12:23 ` [PATCH v3 06/14] drm/rockchip: vop2: Set YUV/RGB overlay mode Andy Yan
2023-11-30 12:23 ` [PATCH v3 07/14] drm/rockchip: vop2: rename grf to sys_grf Andy Yan
2023-11-30 12:24 ` [PATCH v3 08/14] dt-bindings: soc: rockchip: add rk3588 vop/vo syscon Andy Yan
2023-11-30 12:24 ` [PATCH v3 09/14] dt-bindings: display: vop2: Add rk3588 support Andy Yan
2023-12-01  8:17   ` Krzysztof Kozlowski
2023-11-30 12:24 ` [PATCH v3 10/14] dt-bindings: rockchip,vop2: Add more endpoint definition Andy Yan
2023-11-30 12:24 ` [PATCH v3 11/14] drm/rockchip: vop2: Add support for rk3588 Andy Yan
2023-12-05  9:29   ` Sascha Hauer
2023-12-05  9:44     ` Andy Yan
2023-12-05  9:48       ` Sascha Hauer
2023-11-30 12:24 ` [PATCH v3 12/14] drm/rockchip: vop2: Add debugfs support Andy Yan
2023-12-05  9:15   ` Sascha Hauer
2023-12-06 10:20     ` Andy Yan
2023-12-06 11:20       ` Sascha Hauer
2023-12-06 11:27         ` Andy Yan
2023-11-30 12:25 ` [PATCH v3 13/14] dt-bindings: iommu: rockchip: Add Rockchip RK3588 Andy Yan
2023-11-30 22:46   ` Heiko Stübner
2023-11-30 12:25 ` Andy Yan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231130122511.13552-1-andyshrk@163.com \
    --to=andyshrk@163.com \
    --cc=andy.yan@rock-chips.com \
    --cc=chris.obbard@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=kever.yang@rock-chips.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.reichel@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).