devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frieder Schrempf <frieder@fris.de>
To: Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH v2 03/14] arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S i.MX8MM
Date: Thu, 30 Nov 2023 17:16:03 +0100	[thread overview]
Message-ID: <20231130161657.556483-4-frieder@fris.de> (raw)
In-Reply-To: <20231130161657.556483-1-frieder@fris.de>

From: Frieder Schrempf <frieder.schrempf@kontron.de>

There are external pullup resistors on the board and due to silicon
errata ERR050080 let's disable the internal ones to prevent any
unwanted behavior in case they wear out.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes for v2:
* none
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd68576c0..0730c22e5b6b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -294,8 +294,8 @@ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879bf59..3e7db968f7e64 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -252,8 +252,8 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
-- 
2.43.0


  parent reply	other threads:[~2023-11-30 16:18 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-30 16:16 [PATCH v2 00/14] arm64: dts: imx8mm-kontron: DT updates Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 01/14] arm64: dts: imx8mm-kontron: Add support for display bridges on BL i.MX8MM Frieder Schrempf
2023-12-06  2:34   ` Shawn Guo
2023-12-06 14:46     ` Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 02/14] arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support Frieder Schrempf
2023-12-06  2:43   ` Shawn Guo
2023-12-06 14:48     ` Frieder Schrempf
2023-11-30 16:16 ` Frieder Schrempf [this message]
2023-11-30 16:16 ` [PATCH v2 04/14] arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL i.MX8MM Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 05/14] arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL OSM-S board Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 06/14] arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL board Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 07/14] arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL OSM-S board Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 08/14] arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL board Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 09/14] arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 10/14] arm64: dts: imx8mm-kontron: Fix OSM-S devicetrees to match latest hardware Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 11/14] arm64: dts: imx8mm-kontron: Disable uneffective PUE bit in SDIO IOMUX Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 12/14] arm64: dts: imx8mm-kontron: Remove useless trickle-diode-disable from RTC node Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 13/14] arm64: dts: imx8mm-kontron: Add I2C EEPROM on OSM-S Kontron i.MX8MM Frieder Schrempf
2023-11-30 16:16 ` [PATCH v2 14/14] arm64: dts: imx8mm-kontron: Refactor devicetree for OSM-S module and board Frieder Schrempf
2023-12-06  3:01   ` Shawn Guo
2023-12-06 14:49     ` Frieder Schrempf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231130161657.556483-4-frieder@fris.de \
    --to=frieder@fris.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).