From: Kory Maincent <kory.maincent@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Jonathan Corbet <corbet@lwn.net>,
Luis Chamberlain <mcgrof@kernel.org>,
Russ Weight <russ.weight@linux.dev>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org, devicetree@vger.kernel.org,
Dent Project <dentproject@linuxfoundation.org>,
Kory Maincent <kory.maincent@bootlin.com>
Subject: [PATCH net-next v2 4/8] net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface
Date: Fri, 01 Dec 2023 18:10:26 +0100 [thread overview]
Message-ID: <20231201-feature_poe-v2-4-56d8cac607fa@bootlin.com> (raw)
In-Reply-To: <20231201-feature_poe-v2-0-56d8cac607fa@bootlin.com>
Add PSE PoE interface support in the ethtool pse command.
Sponsored-by: Dent Project <dentproject@linuxfoundation.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Changes in v2:
- Follow the "c33" PoE prefix naming change.
---
Documentation/networking/ethtool-netlink.rst | 20 +++++++++
net/ethtool/pse-pd.c | 64 +++++++++++++++++++++++-----
2 files changed, 74 insertions(+), 10 deletions(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 2540c70952ff..e02a7dabc673 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1711,6 +1711,10 @@ Kernel response contents:
PSE functions
``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the
PoDL PSE.
+ ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` u32 Operational state of the PoE
+ PSE functions.
+ ``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the
+ PoE PSE.
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1722,6 +1726,12 @@ aPoDLPSEAdminState. Possible values are:
.. kernel-doc:: include/uapi/linux/ethtool.h
:identifiers: ethtool_podl_pse_admin_state
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.2 aPSEAdminState.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_c33_pse_admin_state
+
When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies
the power detection status of the PoDL PSE. The status depend on internal PSE
state machine and automatic PD classification support. This option is
@@ -1731,6 +1741,12 @@ Possible values are:
.. kernel-doc:: include/uapi/linux/ethtool.h
:identifiers: ethtool_podl_pse_pw_d_status
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.5 aPSEPowerDetectionStatus.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_c33_pse_pw_d_status
+
PSE_SET
=======
@@ -1741,6 +1757,7 @@ Request contents:
====================================== ====== =============================
``ETHTOOL_A_PSE_HEADER`` nested request header
``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state
+ ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1748,6 +1765,9 @@ to control PoDL PSE Admin functions. This option is implementing
``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See
``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
+``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
+
RSS_GET
=======
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index aef57a058f0d..7a98dc029c4f 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -82,6 +82,10 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
len += nla_total_size(sizeof(u32)); /* _PODL_PSE_ADMIN_STATE */
if (st->podl_pw_status > 0)
len += nla_total_size(sizeof(u32)); /* _PODL_PSE_PW_D_STATUS */
+ if (st->c33_admin_state > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_ADMIN_STATE */
+ if (st->c33_pw_status > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_D_STATUS */
return len;
}
@@ -103,6 +107,16 @@ static int pse_fill_reply(struct sk_buff *skb,
st->podl_pw_status))
return -EMSGSIZE;
+ if (st->c33_admin_state > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_ADMIN_STATE,
+ st->c33_admin_state))
+ return -EMSGSIZE;
+
+ if (st->c33_pw_status > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_D_STATUS,
+ st->c33_pw_status))
+ return -EMSGSIZE;
+
return 0;
}
@@ -113,25 +127,18 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
+ [ETHTOOL_A_C33_PSE_ADMIN_CONTROL] =
+ NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
+ ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
};
static int
ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
-{
- return !!info->attrs[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL];
-}
-
-static int
-ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
{
struct net_device *dev = req_info->dev;
- struct pse_control_config config = {};
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
- /* this values are already validated by the ethnl_pse_set_policy */
- config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
-
phydev = dev->phydev;
if (!phydev) {
NL_SET_ERR_MSG(info->extack, "No PHY is attached");
@@ -143,6 +150,43 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
return -EOPNOTSUPP;
}
+ if (!tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] &&
+ !tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL])
+ return 0;
+
+ if (tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] &&
+ !(pse_get_types(phydev->psec) & PSE_PODL)) {
+ NL_SET_ERR_MSG_ATTR(info->extack,
+ tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL],
+ "setting PSE PoDL admin control not supported");
+ return -EOPNOTSUPP;
+ }
+ if (tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] &&
+ !(pse_get_types(phydev->psec) & PSE_C33)) {
+ NL_SET_ERR_MSG_ATTR(info->extack,
+ tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL],
+ "setting PSE PoE admin control not supported");
+ return -EOPNOTSUPP;
+ }
+
+ return 1;
+}
+
+static int
+ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
+{
+ struct net_device *dev = req_info->dev;
+ struct pse_control_config config = {};
+ struct nlattr **tb = info->attrs;
+ struct phy_device *phydev;
+
+ phydev = dev->phydev;
+ /* These values are already validated by the ethnl_pse_set_policy */
+ if (pse_get_types(phydev->psec) & PSE_PODL)
+ config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+ if (pse_get_types(phydev->psec) & PSE_C33)
+ config.c33_admin_control = nla_get_u32(tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]);
+
/* Return errno directly - PSE has no notification */
return pse_ethtool_set_config(phydev->psec, info->extack, &config);
}
--
2.25.1
next prev parent reply other threads:[~2023-12-01 17:11 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-01 17:10 [PATCH net-next v2 0/8] net: Add support for Power over Ethernet (PoE) Kory Maincent
2023-12-01 17:10 ` [PATCH net-next v2 1/8] net: pse-pd: Rectify and adapt the naming of admin_cotrol member of struct pse_control_config Kory Maincent
2023-12-03 18:19 ` Andrew Lunn
2023-12-04 12:19 ` Oleksij Rempel
2023-12-01 17:10 ` [PATCH net-next v2 2/8] ethtool: Expand Ethernet Power Equipment with c33 (PoE) alongside PoDL Kory Maincent
2023-12-03 18:27 ` Andrew Lunn
2023-12-04 12:27 ` Oleksij Rempel
2023-12-06 2:45 ` Bagas Sanjaya
2023-12-06 8:35 ` Köry Maincent
2023-12-06 4:23 ` kernel test robot
2023-12-01 17:10 ` [PATCH net-next v2 3/8] net: pse-pd: Introduce PSE types enumeration Kory Maincent
2023-12-03 18:31 ` Andrew Lunn
2023-12-04 12:43 ` Oleksij Rempel
2023-12-03 18:38 ` Andrew Lunn
2023-12-04 14:00 ` Köry Maincent
2023-12-04 12:51 ` Oleksij Rempel
2023-12-04 13:55 ` Köry Maincent
2023-12-01 17:10 ` Kory Maincent [this message]
2023-12-03 18:45 ` [PATCH net-next v2 4/8] net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface Andrew Lunn
2023-12-04 15:28 ` Köry Maincent
2023-12-04 15:29 ` Oleksij Rempel
2023-12-06 4:18 ` Bagas Sanjaya
2023-12-01 17:10 ` [PATCH net-next v2 5/8] netlink: specs: Modify pse attribute prefix Kory Maincent
2023-12-01 17:10 ` [PATCH net-next v2 6/8] netlink: specs: Expand the pse netlink command with PoE interface Kory Maincent
2023-12-01 17:10 ` [PATCH net-next v2 7/8] dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller Kory Maincent
2023-12-04 23:08 ` Oleksij Rempel
2023-12-05 6:36 ` Oleksij Rempel
2023-12-05 10:15 ` Köry Maincent
2023-12-05 13:31 ` Köry Maincent
2023-12-05 14:21 ` Oleksij Rempel
2023-12-05 15:23 ` Köry Maincent
2023-12-08 9:06 ` Köry Maincent
2023-12-05 12:54 ` Mark Brown
2023-12-01 17:10 ` [PATCH net-next v2 8/8] net: pse-pd: Add PD692x0 PSE controller driver Kory Maincent
2023-12-03 19:34 ` Andrew Lunn
2024-01-16 9:49 ` Köry Maincent
2024-01-16 13:18 ` Andrew Lunn
2024-01-16 14:12 ` Köry Maincent
2023-12-03 21:11 ` Christophe JAILLET
2023-12-04 22:16 ` Köry Maincent
2023-12-05 18:01 ` Christophe JAILLET
2023-12-06 8:41 ` Köry Maincent
2023-12-04 22:59 ` Oleksij Rempel
2023-12-05 6:45 ` Oleksij Rempel
2023-12-05 12:55 ` Mark Brown
2023-12-05 14:02 ` Oleksij Rempel
2023-12-05 15:57 ` Mark Brown
2023-12-21 15:36 ` Köry Maincent
2023-12-21 15:43 ` Mark Brown
2023-12-21 16:10 ` Köry Maincent
2023-12-21 16:20 ` Mark Brown
2023-12-21 17:19 ` Köry Maincent
2023-12-21 17:34 ` Mark Brown
2023-12-21 17:42 ` Oleksij Rempel
2023-12-21 18:05 ` Mark Brown
2023-12-22 7:54 ` Oleksij Rempel
2023-12-05 21:35 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231201-feature_poe-v2-4-56d8cac607fa@bootlin.com \
--to=kory.maincent@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=dentproject@linuxfoundation.org \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcgrof@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=russ.weight@linux.dev \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).