From: Neil Armstrong <neil.armstrong@linaro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Banajit Goswami <bgoswami@quicinc.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 1/5] ASoC: dt-bindings: qcom,wcd938x: move out common properties
Date: Fri, 01 Dec 2023 16:08:54 +0100 [thread overview]
Message-ID: <20231201-topic-sm8650-upstream-wcd939x-codec-v2-1-94ed814b25aa@linaro.org> (raw)
In-Reply-To: <20231201-topic-sm8650-upstream-wcd939x-codec-v2-0-94ed814b25aa@linaro.org>
Move out common properties from qcom,wcd938x bindings in preparation
of adding Qualcomm WCD939x bindings sharing most of the properties.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../devicetree/bindings/sound/qcom,wcd938x.yaml | 81 +-----------------
.../bindings/sound/qcom,wcd93xx-common.yaml | 95 ++++++++++++++++++++++
2 files changed, 96 insertions(+), 80 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index 018565793a3e..de333d07d469 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -15,6 +15,7 @@ description: |
allOf:
- $ref: dai-common.yaml#
+ - $ref: qcom,wcd93xx-common.yaml#
properties:
compatible:
@@ -22,92 +23,12 @@ properties:
- qcom,wcd9380-codec
- qcom,wcd9385-codec
- reset-gpios:
- description: GPIO spec for reset line to use
- maxItems: 1
-
us-euro-gpios:
description: GPIO spec for swapping gnd and mic segments
maxItems: 1
- vdd-buck-supply:
- description: A reference to the 1.8V buck supply
-
- vdd-rxtx-supply:
- description: A reference to the 1.8V rx supply
-
- vdd-io-supply:
- description: A reference to the 1.8V I/O supply
-
- vdd-mic-bias-supply:
- description: A reference to the 3.8V mic bias supply
-
- qcom,tx-device:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- description: A reference to Soundwire tx device phandle
-
- qcom,rx-device:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- description: A reference to Soundwire rx device phandle
-
- qcom,micbias1-microvolt:
- description: micbias1 voltage
- minimum: 1800000
- maximum: 2850000
-
- qcom,micbias2-microvolt:
- description: micbias2 voltage
- minimum: 1800000
- maximum: 2850000
-
- qcom,micbias3-microvolt:
- description: micbias3 voltage
- minimum: 1800000
- maximum: 2850000
-
- qcom,micbias4-microvolt:
- description: micbias4 voltage
- minimum: 1800000
- maximum: 2850000
-
- qcom,hphl-jack-type-normally-closed:
- description: Indicates that HPHL jack switch type is normally closed
- type: boolean
-
- qcom,ground-jack-type-normally-closed:
- description: Indicates that Headset Ground switch type is normally closed
- type: boolean
-
- qcom,mbhc-headset-vthreshold-microvolt:
- description: Voltage threshold value for headset detection
- minimum: 0
- maximum: 2850000
-
- qcom,mbhc-headphone-vthreshold-microvolt:
- description: Voltage threshold value for headphone detection
- minimum: 0
- maximum: 2850000
-
- qcom,mbhc-buttons-vthreshold-microvolt:
- description:
- Array of 8 Voltage threshold values corresponding to headset
- button0 - button7
- minItems: 8
- maxItems: 8
-
- '#sound-dai-cells':
- const: 1
-
required:
- compatible
- - reset-gpios
- - qcom,tx-device
- - qcom,rx-device
- - qcom,micbias1-microvolt
- - qcom,micbias2-microvolt
- - qcom,micbias3-microvolt
- - qcom,micbias4-microvolt
- - "#sound-dai-cells"
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml
new file mode 100644
index 000000000000..f78ba148ad25
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd93xx-common.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Qualcomm WCD93xx Audio Codec
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+ reset-gpios:
+ description: GPIO spec for reset line to use
+ maxItems: 1
+
+ vdd-buck-supply:
+ description: A reference to the 1.8V buck supply
+
+ vdd-rxtx-supply:
+ description: A reference to the 1.8V rx supply
+
+ vdd-io-supply:
+ description: A reference to the 1.8V I/O supply
+
+ vdd-mic-bias-supply:
+ description: A reference to the 3.8V mic bias supply
+
+ qcom,tx-device:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: A reference to Soundwire tx device phandle
+
+ qcom,rx-device:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: A reference to Soundwire rx device phandle
+
+ qcom,micbias1-microvolt:
+ description: micbias1 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias2-microvolt:
+ description: micbias2 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias3-microvolt:
+ description: micbias3 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias4-microvolt:
+ description: micbias4 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,hphl-jack-type-normally-closed:
+ description: Indicates that HPHL jack switch type is normally closed
+ type: boolean
+
+ qcom,ground-jack-type-normally-closed:
+ description: Indicates that Headset Ground switch type is normally closed
+ type: boolean
+
+ qcom,mbhc-headset-vthreshold-microvolt:
+ description: Voltage threshold value for headset detection
+ minimum: 0
+ maximum: 2850000
+
+ qcom,mbhc-headphone-vthreshold-microvolt:
+ description: Voltage threshold value for headphone detection
+ minimum: 0
+ maximum: 2850000
+
+ qcom,mbhc-buttons-vthreshold-microvolt:
+ description:
+ Array of 8 Voltage threshold values corresponding to headset
+ button0 - button7
+ minItems: 8
+ maxItems: 8
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - reset-gpios
+ - qcom,tx-device
+ - qcom,rx-device
+ - qcom,micbias1-microvolt
+ - qcom,micbias2-microvolt
+ - qcom,micbias3-microvolt
+ - qcom,micbias4-microvolt
+ - "#sound-dai-cells"
+
+additionalProperties: true
--
2.34.1
next prev parent reply other threads:[~2023-12-01 15:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-01 15:08 [PATCH v2 0/5] ASoC: codecs: add support for WCD939x Codec Neil Armstrong
2023-12-01 15:08 ` Neil Armstrong [this message]
2023-12-01 15:08 ` [PATCH v2 2/5] ASoC: dt-bindings: document WCD939x Audio Codec Neil Armstrong
2023-12-01 15:17 ` Krzysztof Kozlowski
2023-12-01 15:08 ` [PATCH v2 3/5] ASoC: codec: wcd-mbhc-v2: add support when connected behind an USB-C audio mux Neil Armstrong
2023-12-01 15:08 ` [PATCH v2 4/5] ASoC: codecs: Add WCD939x Soundwire devices driver Neil Armstrong
2023-12-01 15:08 ` [PATCH v2 5/5] ASoC: codecs: Add WCD939x Codec driver Neil Armstrong
2023-12-05 17:12 ` kernel test robot
2023-12-05 17:22 ` kernel test robot
2023-12-06 5:39 ` Dan Carpenter
2023-12-06 8:10 ` Neil Armstrong
2023-12-06 7:10 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231201-topic-sm8650-upstream-wcd939x-codec-v2-1-94ed814b25aa@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=andersson@kernel.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).