From: Neil Armstrong <neil.armstrong@linaro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Banajit Goswami <bgoswami@quicinc.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 2/5] ASoC: dt-bindings: document WCD939x Audio Codec
Date: Fri, 01 Dec 2023 16:08:55 +0100 [thread overview]
Message-ID: <20231201-topic-sm8650-upstream-wcd939x-codec-v2-2-94ed814b25aa@linaro.org> (raw)
In-Reply-To: <20231201-topic-sm8650-upstream-wcd939x-codec-v2-0-94ed814b25aa@linaro.org>
Document the Qualcomm WCD9390/WCD9395 Audio Codec and the
Soundwire devices than can be found on Qualcomm SM8650 based platforms.
The Qualcomm WCD9390/WCD9395 Audio Codec communicates
with the host SoC over 2 Soundwire links to provide:
- 4 ADC inputs for up to 5 Analog Microphones
- 4 DMIC inputs for up to 8 Digital Microphones
- 4 Microphone BIAS
- Stereo Headphone output
- Mono EAR output
- MBHC engine for Headset Detection
The WCD9390/WCD9395 IC has separate I2C subsystem for USB-C
DP Altmode/Audio Accessory mode Mux which is not documented
here but requires port/endpoint graph and properties to handle
Altmode/Audio Accessory switch and orientation.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/sound/qcom,wcd939x-sdw.yaml | 69 ++++++++++++++++
.../devicetree/bindings/sound/qcom,wcd939x.yaml | 96 ++++++++++++++++++++++
2 files changed, 165 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml
new file mode 100644
index 000000000000..67ed7701b5d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x-sdw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire devices on WCD9390/WCD9395
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+ It has RX and TX Soundwire devices. This bindings is for the devices.
+
+properties:
+ compatible:
+ const: sdw20217010e00
+
+ reg:
+ maxItems: 1
+
+ qcom,tx-port-mapping:
+ description: |
+ Specifies static port mapping between device and host tx ports.
+ In the order of the device port index.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 4
+
+ qcom,rx-port-mapping:
+ description: |
+ Specifies static port mapping between device and host rx ports.
+ In the order of device port index.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 6
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ soundwire@3210000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03210000 0x2000>;
+ wcd938x_rx: codec@0,4 {
+ compatible = "sdw20217010e00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5 6>;
+ };
+ };
+
+ soundwire@3230000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03230000 0x2000>;
+ wcd938x_tx: codec@0,3 {
+ compatible = "sdw20217010e00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 3 4 5>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
new file mode 100644
index 000000000000..6e76f6a8634f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+ It has RX and TX Soundwire devices.
+ The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
+ accessible over an I2C interface.
+ The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
+ subsystems are external to the IC, thus requiring DT port-endpoint graph description
+ to handle USB-C altmode & orientation switching for Audio Accessory Mode.
+
+allOf:
+ - $ref: dai-common.yaml#
+ - $ref: qcom,wcd93xx-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,wcd9390-codec
+ - items:
+ - const: qcom,wcd9395-codec
+ - const: qcom,wcd9390-codec
+
+ mode-switch:
+ description: Flag the port as possible handler of altmode switching
+ type: boolean
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the WCD939x Codec node to USB MUX subsystems for the
+ purpose of handling altmode muxing and orientation switching to detect and
+ enable Audio Accessory Mode.
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ codec {
+ compatible = "qcom,wcd9390-codec";
+ reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+ #sound-dai-cells = <1>;
+ qcom,tx-device = <&wcd939x_tx>;
+ qcom,rx-device = <&wcd939x_rx>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,hphl-jack-type-normally-closed;
+ qcom,ground-jack-type-normally-closed;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ };
+
+ /* ... */
+
+ soundwire@3210000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03210000 0x2000>;
+ wcd939x_rx: codec@0,4 {
+ compatible = "sdw20217010e00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5 6>;
+ };
+ };
+
+ soundwire@3230000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03230000 0x2000>;
+ wcd938x_tx: codec@0,3 {
+ compatible = "sdw20217010e00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 3 4 5>;
+ };
+ };
+
+...
--
2.34.1
next prev parent reply other threads:[~2023-12-01 15:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-01 15:08 [PATCH v2 0/5] ASoC: codecs: add support for WCD939x Codec Neil Armstrong
2023-12-01 15:08 ` [PATCH v2 1/5] ASoC: dt-bindings: qcom,wcd938x: move out common properties Neil Armstrong
2023-12-01 15:08 ` Neil Armstrong [this message]
2023-12-01 15:17 ` [PATCH v2 2/5] ASoC: dt-bindings: document WCD939x Audio Codec Krzysztof Kozlowski
2023-12-01 15:08 ` [PATCH v2 3/5] ASoC: codec: wcd-mbhc-v2: add support when connected behind an USB-C audio mux Neil Armstrong
2023-12-01 15:08 ` [PATCH v2 4/5] ASoC: codecs: Add WCD939x Soundwire devices driver Neil Armstrong
2023-12-01 15:08 ` [PATCH v2 5/5] ASoC: codecs: Add WCD939x Codec driver Neil Armstrong
2023-12-05 17:12 ` kernel test robot
2023-12-05 17:22 ` kernel test robot
2023-12-06 5:39 ` Dan Carpenter
2023-12-06 8:10 ` Neil Armstrong
2023-12-06 7:10 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231201-topic-sm8650-upstream-wcd939x-codec-v2-2-94ed814b25aa@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=andersson@kernel.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).