From: Johan Hovold <johan+linaro@kernel.org>
To: Lee Jones <lee@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 3/4] dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: clean up example
Date: Fri, 1 Dec 2023 17:45:45 +0100 [thread overview]
Message-ID: <20231201164546.12606-4-johan+linaro@kernel.org> (raw)
In-Reply-To: <20231201164546.12606-1-johan+linaro@kernel.org>
The SPMI PMIC sits on an SPMI bus which and has two address cells with
no size.
Clean up the example by adding a parent SPMI bus node with proper
'#address-cells' and '#size-cells' properties, using a define for the
second register value, dropping the unnecessary label and increasing the
indentation to four spaces.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 134 +++++++++---------
1 file changed, 70 insertions(+), 64 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index 45cd6a613a91..6a824351834e 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -59,69 +59,75 @@ additionalProperties: false
examples:
- |
-
- pmic: pmic@0 {
- compatible = "hisilicon,hi6421v600-spmi";
- reg = <0 0>;
-
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gpio28>;
- interrupts = <0 0>;
-
- regulators {
- ldo3: ldo3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2000000>;
- regulator-boot-on;
- };
-
- ldo4: ldo4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <1900000>;
- regulator-boot-on;
- };
-
- ldo9: ldo9 {
- regulator-name = "ldo9";
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo15: ldo15 {
- regulator-name = "ldo15";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo16: ldo16 {
- regulator-name = "ldo16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldo17: ldo17 {
- regulator-name = "ldo17";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo33: ldo33 {
- regulator-name = "ldo33";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo34: ldo34 {
- regulator-name = "ldo34";
- regulator-min-microvolt = <2600000>;
- regulator-max-microvolt = <3300000>;
+ #include <dt-bindings/spmi/spmi.h>
+
+ spmi {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ pmic@0 {
+ compatible = "hisilicon,hi6421v600-spmi";
+ reg = <0 SPMI_USID>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio28>;
+ interrupts = <0 0>;
+
+ regulators {
+ ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15 {
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16 {
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33 {
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34 {
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
};
- };
};
--
2.41.0
next prev parent reply other threads:[~2023-12-01 16:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-01 16:45 [PATCH v2 0/4] dt-bindings: mfd: fix up PMIC examples Johan Hovold
2023-12-01 16:45 ` [PATCH v2 1/4] dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: fix up binding reference Johan Hovold
2023-12-01 16:45 ` [PATCH v2 2/4] dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: fix regulator binding Johan Hovold
2023-12-01 22:46 ` Rob Herring
2023-12-01 16:45 ` Johan Hovold [this message]
2023-12-01 16:45 ` [PATCH v2 4/4] dt-bindings: mfd: pm8008: clean up example node names Johan Hovold
2023-12-03 11:28 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231201164546.12606-4-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).