[PATCH] arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls

[Sam Edwards <cfsworks@gmail.com>]

The pinctrls for the hym8563 interrupt line and fan-tach input
were both mistakenly defined as `pcfg_pull_none`. As these are
active-low signals (level-triggered, in the hym8563 case) which
may not be driven at times, these should really be pull-up. The
lack of any bias results in spurious interrupts.

Fix this by modifying the `rockchip,pins` properties as necessary
to enable the pull-up resistors.

Fixes: 2806a69f3fef6 ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index b517debf2b54..bbb6d38cd159 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -294,13 +294,13 @@ &pcie3x4 {
 &pinctrl {
 	fan {
 		fan_int: fan-int {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	hym8563 {
 		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-- 
2.41.0