* [PATCH v7 1/5] dt-bindings: ufs: common: add OPP table
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
@ 2023-10-12 17:21 ` Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 2/5] scsi: ufs: core: Add OPP support for scaling clocks and regulators Manivannan Sadhasivam
` (6 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-10-12 17:21 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb, martin.petersen
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, alessandro.carminati, Rob Herring,
Manivannan Sadhasivam
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Except scaling UFS and bus clocks, it's necessary to scale also the
voltages of regulators or power domain performance state levels. Adding
Operating Performance Points table allows to adjust power domain
performance state, depending on the UFS clock speed.
OPPv2 deprecates previous property limited to clock scaling:
freq-table-hz.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../devicetree/bindings/ufs/ufs-common.yaml | 35 +++++++++++++++++--
1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
index bbaee4f5f7b2..985ea8f64de8 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -20,11 +20,25 @@ properties:
items:
- description: Minimum frequency for given clock in Hz
- description: Maximum frequency for given clock in Hz
+ deprecated: true
description: |
+ Preferred is operating-points-v2.
+
Array of <min max> operating frequencies in Hz stored in the same order
- as the clocks property. If this property is not defined or a value in the
- array is "0" then it is assumed that the frequency is set by the parent
- clock or a fixed rate clock source.
+ as the clocks property. If either this property or operating-points-v2 is
+ not defined or a value in the array is "0" then it is assumed that the
+ frequency is set by the parent clock or a fixed rate clock source.
+
+ operating-points-v2:
+ description:
+ Preferred over freq-table-hz.
+ If present, each OPP must contain array of frequencies stored in the same
+ order for each clock. If clock frequency in the array is "0" then it is
+ assumed that the frequency is set by the parent clock or a fixed rate
+ clock source.
+
+ opp-table:
+ type: object
interrupts:
maxItems: 1
@@ -75,8 +89,23 @@ properties:
dependencies:
freq-table-hz: [ clocks ]
+ operating-points-v2: [ clocks, clock-names ]
required:
- interrupts
+allOf:
+ - if:
+ required:
+ - freq-table-hz
+ then:
+ properties:
+ operating-points-v2: false
+ - if:
+ required:
+ - operating-points-v2
+ then:
+ properties:
+ freq-table-hz: false
+
additionalProperties: true
--
2.25.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 2/5] scsi: ufs: core: Add OPP support for scaling clocks and regulators
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 1/5] dt-bindings: ufs: common: add OPP table Manivannan Sadhasivam
@ 2023-10-12 17:21 ` Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 3/5] scsi: ufs: host: Add support for parsing OPP Manivannan Sadhasivam
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-10-12 17:21 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb, martin.petersen
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, alessandro.carminati, Manivannan Sadhasivam
UFS core is only scaling the clocks during devfreq scaling and
initialization. But for an optimum power saving, regulators should also
be scaled along with the clocks.
So let's use the OPP framework which supports scaling clocks, regulators,
and performance state using OPP table defined in devicetree. For
accomodating the OPP support, the existing APIs (ufshcd_scale_clks,
ufshcd_is_devfreq_scaling_required and ufshcd_devfreq_scale) are modified
to accept "freq" as an argument which in turn used by the OPP helpers.
The OPP support is added along with the old freq-table based clock scaling
so that the existing platforms work as expected.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/ufs/core/ufshcd.c | 144 +++++++++++++++++++++++++++++---------
include/ufs/ufshcd.h | 4 ++
2 files changed, 115 insertions(+), 33 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index c45737c5adb9..3f52e05002e4 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pm_opp.h>
#include <linux/regulator/consumer.h>
#include <linux/sched/clock.h>
#include <linux/iopoll.h>
@@ -275,7 +276,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
static void ufshcd_resume_clkscaling(struct ufs_hba *hba);
static void ufshcd_suspend_clkscaling(struct ufs_hba *hba);
static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba);
-static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up);
+static int ufshcd_scale_clks(struct ufs_hba *hba, unsigned long freq,
+ bool scale_up);
static irqreturn_t ufshcd_intr(int irq, void *__hba);
static int ufshcd_change_power_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *pwr_mode);
@@ -1062,14 +1064,32 @@ static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up)
return ret;
}
+static int ufshcd_opp_set_rate(struct ufs_hba *hba, unsigned long freq)
+{
+ struct dev_pm_opp *opp;
+ int ret;
+
+ opp = dev_pm_opp_find_freq_floor_indexed(hba->dev,
+ &freq, 0);
+ if (IS_ERR(opp))
+ return PTR_ERR(opp);
+
+ ret = dev_pm_opp_set_opp(hba->dev, opp);
+ dev_pm_opp_put(opp);
+
+ return ret;
+}
+
/**
* ufshcd_scale_clks - scale up or scale down UFS controller clocks
* @hba: per adapter instance
+ * @freq: frequency to scale
* @scale_up: True if scaling up and false if scaling down
*
* Return: 0 if successful; < 0 upon failure.
*/
-static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
+static int ufshcd_scale_clks(struct ufs_hba *hba, unsigned long freq,
+ bool scale_up)
{
int ret = 0;
ktime_t start = ktime_get();
@@ -1078,13 +1098,21 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
if (ret)
goto out;
- ret = ufshcd_set_clk_freq(hba, scale_up);
+ if (hba->use_pm_opp)
+ ret = ufshcd_opp_set_rate(hba, freq);
+ else
+ ret = ufshcd_set_clk_freq(hba, scale_up);
if (ret)
goto out;
ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
- if (ret)
- ufshcd_set_clk_freq(hba, !scale_up);
+ if (ret) {
+ if (hba->use_pm_opp)
+ ufshcd_opp_set_rate(hba,
+ hba->devfreq->previous_freq);
+ else
+ ufshcd_set_clk_freq(hba, !scale_up);
+ }
out:
trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
@@ -1096,12 +1124,13 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
/**
* ufshcd_is_devfreq_scaling_required - check if scaling is required or not
* @hba: per adapter instance
+ * @freq: frequency to scale
* @scale_up: True if scaling up and false if scaling down
*
* Return: true if scaling is required, false otherwise.
*/
static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba,
- bool scale_up)
+ unsigned long freq, bool scale_up)
{
struct ufs_clk_info *clki;
struct list_head *head = &hba->clk_list_head;
@@ -1109,6 +1138,9 @@ static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba,
if (list_empty(head))
return false;
+ if (hba->use_pm_opp)
+ return freq != hba->clk_scaling.target_freq;
+
list_for_each_entry(clki, head, list) {
if (!IS_ERR_OR_NULL(clki->clk)) {
if (scale_up && clki->max_freq) {
@@ -1304,12 +1336,14 @@ static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, int err, bool sc
/**
* ufshcd_devfreq_scale - scale up/down UFS clocks and gear
* @hba: per adapter instance
+ * @freq: frequency to scale
* @scale_up: True for scaling up and false for scalin down
*
* Return: 0 for success; -EBUSY if scaling can't happen at this time; non-zero
* for any other errors.
*/
-static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
+static int ufshcd_devfreq_scale(struct ufs_hba *hba, unsigned long freq,
+ bool scale_up)
{
int ret = 0;
@@ -1324,7 +1358,7 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
goto out_unprepare;
}
- ret = ufshcd_scale_clks(hba, scale_up);
+ ret = ufshcd_scale_clks(hba, freq, scale_up);
if (ret) {
if (!scale_up)
ufshcd_scale_gear(hba, true);
@@ -1335,7 +1369,8 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
if (scale_up) {
ret = ufshcd_scale_gear(hba, true);
if (ret) {
- ufshcd_scale_clks(hba, false);
+ ufshcd_scale_clks(hba, hba->devfreq->previous_freq,
+ false);
goto out_unprepare;
}
}
@@ -1393,9 +1428,22 @@ static int ufshcd_devfreq_target(struct device *dev,
if (!ufshcd_is_clkscaling_supported(hba))
return -EINVAL;
- clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
- /* Override with the closest supported frequency */
- *freq = (unsigned long) clk_round_rate(clki->clk, *freq);
+ if (hba->use_pm_opp) {
+ struct dev_pm_opp *opp;
+
+ /* Get the recommended frequency from OPP framework */
+ opp = devfreq_recommended_opp(dev, freq, flags);
+ if (IS_ERR(opp))
+ return PTR_ERR(opp);
+
+ dev_pm_opp_put(opp);
+ } else {
+ /* Override with the closest supported frequency */
+ clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info,
+ list);
+ *freq = (unsigned long) clk_round_rate(clki->clk, *freq);
+ }
+
spin_lock_irqsave(hba->host->host_lock, irq_flags);
if (ufshcd_eh_in_progress(hba)) {
spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
@@ -1410,12 +1458,17 @@ static int ufshcd_devfreq_target(struct device *dev,
goto out;
}
- /* Decide based on the rounded-off frequency and update */
- scale_up = *freq == clki->max_freq;
- if (!scale_up)
+ /* Decide based on the target or rounded-off frequency and update */
+ if (hba->use_pm_opp)
+ scale_up = *freq > hba->clk_scaling.target_freq;
+ else
+ scale_up = *freq == clki->max_freq;
+
+ if (!hba->use_pm_opp && !scale_up)
*freq = clki->min_freq;
+
/* Update the frequency */
- if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
+ if (!ufshcd_is_devfreq_scaling_required(hba, *freq, scale_up)) {
spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
ret = 0;
goto out; /* no state change required */
@@ -1423,7 +1476,9 @@ static int ufshcd_devfreq_target(struct device *dev,
spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
start = ktime_get();
- ret = ufshcd_devfreq_scale(hba, scale_up);
+ ret = ufshcd_devfreq_scale(hba, *freq, scale_up);
+ if (!ret)
+ hba->clk_scaling.target_freq = *freq;
trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
(scale_up ? "up" : "down"),
@@ -1443,8 +1498,6 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
struct ufs_hba *hba = dev_get_drvdata(dev);
struct ufs_clk_scaling *scaling = &hba->clk_scaling;
unsigned long flags;
- struct list_head *clk_list = &hba->clk_list_head;
- struct ufs_clk_info *clki;
ktime_t curr_t;
if (!ufshcd_is_clkscaling_supported(hba))
@@ -1457,17 +1510,24 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
if (!scaling->window_start_t)
goto start_window;
- clki = list_first_entry(clk_list, struct ufs_clk_info, list);
/*
* If current frequency is 0, then the ondemand governor considers
* there's no initial frequency set. And it always requests to set
* to max. frequency.
*/
- stat->current_frequency = clki->curr_freq;
+ if (hba->use_pm_opp) {
+ stat->current_frequency = hba->clk_scaling.target_freq;
+ } else {
+ struct list_head *clk_list = &hba->clk_list_head;
+ struct ufs_clk_info *clki;
+
+ clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+ stat->current_frequency = clki->curr_freq;
+ }
+
if (scaling->is_busy_started)
scaling->tot_busy_t += ktime_us_delta(curr_t,
scaling->busy_start_t);
-
stat->total_time = ktime_us_delta(curr_t, scaling->window_start_t);
stat->busy_time = scaling->tot_busy_t;
start_window:
@@ -1496,9 +1556,11 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
if (list_empty(clk_list))
return 0;
- clki = list_first_entry(clk_list, struct ufs_clk_info, list);
- dev_pm_opp_add(hba->dev, clki->min_freq, 0);
- dev_pm_opp_add(hba->dev, clki->max_freq, 0);
+ if (!hba->use_pm_opp) {
+ clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+ dev_pm_opp_add(hba->dev, clki->min_freq, 0);
+ dev_pm_opp_add(hba->dev, clki->max_freq, 0);
+ }
ufshcd_vops_config_scaling_param(hba, &hba->vps->devfreq_profile,
&hba->vps->ondemand_data);
@@ -1510,8 +1572,10 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
ret = PTR_ERR(devfreq);
dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
- dev_pm_opp_remove(hba->dev, clki->min_freq);
- dev_pm_opp_remove(hba->dev, clki->max_freq);
+ if (!hba->use_pm_opp) {
+ dev_pm_opp_remove(hba->dev, clki->min_freq);
+ dev_pm_opp_remove(hba->dev, clki->max_freq);
+ }
return ret;
}
@@ -1523,7 +1587,6 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
static void ufshcd_devfreq_remove(struct ufs_hba *hba)
{
struct list_head *clk_list = &hba->clk_list_head;
- struct ufs_clk_info *clki;
if (!hba->devfreq)
return;
@@ -1531,9 +1594,13 @@ static void ufshcd_devfreq_remove(struct ufs_hba *hba)
devfreq_remove_device(hba->devfreq);
hba->devfreq = NULL;
- clki = list_first_entry(clk_list, struct ufs_clk_info, list);
- dev_pm_opp_remove(hba->dev, clki->min_freq);
- dev_pm_opp_remove(hba->dev, clki->max_freq);
+ if (!hba->use_pm_opp) {
+ struct ufs_clk_info *clki;
+
+ clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+ dev_pm_opp_remove(hba->dev, clki->min_freq);
+ dev_pm_opp_remove(hba->dev, clki->max_freq);
+ }
}
static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba)
@@ -1618,7 +1685,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
ufshcd_resume_clkscaling(hba);
} else {
ufshcd_suspend_clkscaling(hba);
- err = ufshcd_devfreq_scale(hba, true);
+ err = ufshcd_devfreq_scale(hba, ULONG_MAX, true);
if (err)
dev_err(hba->dev, "%s: failed to scale clocks up %d\n",
__func__, err);
@@ -7619,7 +7686,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
hba->silence_err_logs = false;
/* scale up clocks to max frequency before full reinitialization */
- ufshcd_scale_clks(hba, true);
+ ufshcd_scale_clks(hba, ULONG_MAX, true);
err = ufshcd_hba_enable(hba);
@@ -9165,6 +9232,17 @@ static int ufshcd_init_clocks(struct ufs_hba *hba)
dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__,
clki->name, clk_get_rate(clki->clk));
}
+
+ /* Set Max. frequency for all clocks */
+ if (hba->use_pm_opp) {
+ ret = ufshcd_opp_set_rate(hba, ULONG_MAX);
+ if (ret) {
+ dev_err(hba->dev, "%s: failed to set OPP: %d", __func__,
+ ret);
+ goto out;
+ }
+ }
+
out:
return ret;
}
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index e0d6590d163d..fc0d6d37319a 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -429,6 +429,7 @@ struct ufs_clk_gating {
* @workq: workqueue to schedule devfreq suspend/resume work
* @suspend_work: worker to suspend devfreq
* @resume_work: worker to resume devfreq
+ * @target_freq: frequency requested by devfreq framework
* @min_gear: lowest HS gear to scale down to
* @is_enabled: tracks if scaling is currently enabled or not, controlled by
* clkscale_enable sysfs node
@@ -448,6 +449,7 @@ struct ufs_clk_scaling {
struct workqueue_struct *workq;
struct work_struct suspend_work;
struct work_struct resume_work;
+ unsigned long target_freq;
u32 min_gear;
bool is_enabled;
bool is_allowed;
@@ -862,6 +864,7 @@ enum ufshcd_mcq_opr {
* @auto_bkops_enabled: to track whether bkops is enabled in device
* @vreg_info: UFS device voltage regulator information
* @clk_list_head: UFS host controller clocks list node head
+ * @use_pm_opp: Indicates whether OPP based scaling is used or not
* @req_abort_count: number of times ufshcd_abort() has been called
* @lanes_per_direction: number of lanes per data direction between the UFS
* controller and the UFS device.
@@ -1012,6 +1015,7 @@ struct ufs_hba {
bool auto_bkops_enabled;
struct ufs_vreg_info vreg_info;
struct list_head clk_list_head;
+ bool use_pm_opp;
/* Number of requests aborts */
int req_abort_count;
--
2.25.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 3/5] scsi: ufs: host: Add support for parsing OPP
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 1/5] dt-bindings: ufs: common: add OPP table Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 2/5] scsi: ufs: core: Add OPP support for scaling clocks and regulators Manivannan Sadhasivam
@ 2023-10-12 17:21 ` Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC Manivannan Sadhasivam
` (4 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-10-12 17:21 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb, martin.petersen
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, alessandro.carminati, Manivannan Sadhasivam
OPP framework can be used to scale the clocks along with other entities
such as regulators, performance state etc... So let's add support for
parsing OPP from devicetree. OPP support in devicetree is added through
the "operating-points-v2" property which accepts the OPP table defining
clock frequency, regulator voltage, power domain performance state etc...
Since the UFS controller requires multiple clocks to be controlled for
proper working, devm_pm_opp_set_config() has been used which supports
scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
It should be noted that the OPP support is not compatible with the old
"freq-table-hz" property. So only one can be used at a time even though
the UFS core supports both.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/ufs/core/ufshcd.c | 36 +++++++++++++++
drivers/ufs/host/ufshcd-pltfrm.c | 78 ++++++++++++++++++++++++++++++++
include/ufs/ufshcd.h | 3 ++
3 files changed, 117 insertions(+)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 3f52e05002e4..a729be3e1f1c 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -1064,6 +1064,42 @@ static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up)
return ret;
}
+int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *opp, void *data,
+ bool scaling_down)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct list_head *head = &hba->clk_list_head;
+ struct ufs_clk_info *clki;
+ unsigned long freq;
+ u8 idx = 0;
+ int ret;
+
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk)) {
+ freq = dev_pm_opp_get_freq_indexed(opp, idx++);
+
+ /* Do not set rate for clocks having frequency as 0 */
+ if (!freq)
+ continue;
+
+ ret = clk_set_rate(clki->clk, freq);
+ if (ret) {
+ dev_err(dev, "%s: %s clk set rate(%ldHz) failed, %d\n",
+ __func__, clki->name, freq, ret);
+ return ret;
+ }
+
+ trace_ufshcd_clk_scaling(dev_name(dev),
+ (scaling_down ? "scaled down" : "scaled up"),
+ clki->name, hba->clk_scaling.target_freq, freq);
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ufshcd_opp_config_clks);
+
static int ufshcd_opp_set_rate(struct ufs_hba *hba, unsigned long freq)
{
struct dev_pm_opp *opp;
diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
index 61cf8b957da4..da2558e274b4 100644
--- a/drivers/ufs/host/ufshcd-pltfrm.c
+++ b/drivers/ufs/host/ufshcd-pltfrm.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
@@ -212,6 +213,77 @@ static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
}
}
+static int ufshcd_parse_operating_points(struct ufs_hba *hba)
+{
+ struct device *dev = hba->dev;
+ struct device_node *np = dev->of_node;
+ struct dev_pm_opp_config config = {};
+ struct ufs_clk_info *clki;
+ const char **clk_names;
+ int cnt, i, ret;
+
+ if (!of_find_property(np, "operating-points-v2", NULL))
+ return 0;
+
+ if (of_find_property(np, "freq-table-hz", NULL)) {
+ dev_err(dev, "%s: operating-points and freq-table-hz are incompatible\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ cnt = of_property_count_strings(np, "clock-names");
+ if (cnt <= 0) {
+ dev_err(dev, "%s: Missing clock-names\n", __func__);
+ return -ENODEV;
+ }
+
+ /* OPP expects clk_names to be NULL terminated */
+ clk_names = devm_kcalloc(dev, cnt + 1, sizeof(*clk_names), GFP_KERNEL);
+ if (!clk_names)
+ return -ENOMEM;
+
+ /*
+ * We still need to get reference to all clocks as the UFS core uses
+ * them separately.
+ */
+ for (i = 0; i < cnt; i++) {
+ ret = of_property_read_string_index(np, "clock-names", i,
+ &clk_names[i]);
+ if (ret)
+ return ret;
+
+ clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
+ if (!clki)
+ return -ENOMEM;
+
+ clki->name = devm_kstrdup(dev, clk_names[i], GFP_KERNEL);
+ if (!clki->name)
+ return -ENOMEM;
+
+ if (!strcmp(clk_names[i], "ref_clk"))
+ clki->keep_link_active = true;
+
+ list_add_tail(&clki->list, &hba->clk_list_head);
+ }
+
+ config.clk_names = clk_names,
+ config.config_clks = ufshcd_opp_config_clks;
+
+ ret = devm_pm_opp_set_config(dev, &config);
+ if (ret)
+ return ret;
+
+ ret = devm_pm_opp_of_add_table(dev);
+ if (ret) {
+ dev_err(dev, "Failed to add OPP table: %d\n", ret);
+ return ret;
+ }
+
+ hba->use_pm_opp = true;
+
+ return 0;
+}
+
/**
* ufshcd_get_pwr_dev_param - get finally agreed attributes for
* power mode change
@@ -378,6 +450,12 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
ufshcd_init_lanes_per_dir(hba);
+ err = ufshcd_parse_operating_points(hba);
+ if (err) {
+ dev_err(dev, "%s: OPP parse failed %d\n", __func__, err);
+ goto dealloc_host;
+ }
+
err = ufshcd_init(hba, mmio_base, irq);
if (err) {
dev_err_probe(dev, err, "Initialization failed with error %d\n",
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index fc0d6d37319a..7f0b2c5599cd 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -1254,6 +1254,9 @@ void ufshcd_mcq_make_queues_operational(struct ufs_hba *hba);
void ufshcd_mcq_enable_esi(struct ufs_hba *hba);
void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg);
+int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *opp, void *data,
+ bool scaling_down);
/**
* ufshcd_set_variant - set variant specific data to the hba
* @hba: per adapter instance
--
2.25.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
` (2 preceding siblings ...)
2023-10-12 17:21 ` [PATCH v7 3/5] scsi: ufs: host: Add support for parsing OPP Manivannan Sadhasivam
@ 2023-10-12 17:21 ` Manivannan Sadhasivam
2023-10-12 17:21 ` [PATCH v7 5/5] arm64: dts: qcom: sm8250: " Manivannan Sadhasivam
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-10-12 17:21 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb, martin.petersen
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, alessandro.carminati, Dmitry Baryshkov,
Manivannan Sadhasivam
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[mani: Splitted pd change and used rpmhpd_opp_low_svs]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 42 +++++++++++++++++++++-------
1 file changed, 32 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 055ca80c0075..2ea6eb44953e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2605,22 +2605,44 @@ ufs_mem_hc: ufshc@1d84000 {
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
- freq-table-hz =
- <50000000 200000000>,
- <0 0>,
- <0 0>,
- <37500000 150000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <75000000 300000000>;
+
+ operating-points-v2 = <&ufs_opp_table>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <150000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
ufs_mem_phy: phy@1d87000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 5/5] arm64: dts: qcom: sm8250: Add OPP table support to UFSHC
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
` (3 preceding siblings ...)
2023-10-12 17:21 ` [PATCH v7 4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC Manivannan Sadhasivam
@ 2023-10-12 17:21 ` Manivannan Sadhasivam
[not found] ` <CGME20231205205609eucas1p2609b01ca4e3527e8b5281dec1d92653c@eucas1p2.samsung.com>
2023-10-16 3:59 ` [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
` (2 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-10-12 17:21 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb, martin.petersen
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, alessandro.carminati, Manivannan Sadhasivam,
Dmitry Baryshkov
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 39 +++++++++++++++++++++-------
1 file changed, 30 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a4e58ad731c3..33abd84aae53 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2198,21 +2198,42 @@ ufs_mem_hc: ufshc@1d84000 {
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <37500000 300000000>,
- <0 0>,
- <0 0>,
- <37500000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
+
+ operating-points-v2 = <&ufs_opp_table>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-37500000 {
+ opp-hz = /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
ufs_mem_phy: phy@1d87000 {
--
2.25.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v7 0/5] UFS: Add OPP support
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
` (4 preceding siblings ...)
2023-10-12 17:21 ` [PATCH v7 5/5] arm64: dts: qcom: sm8250: " Manivannan Sadhasivam
@ 2023-10-16 3:59 ` Manivannan Sadhasivam
2023-10-17 0:59 ` Martin K. Petersen
2023-10-25 2:19 ` (subset) " Martin K. Petersen
2023-12-03 4:54 ` Bjorn Andersson
7 siblings, 1 reply; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-10-16 3:59 UTC (permalink / raw)
To: martin.petersen
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb
On Thu, Oct 12, 2023 at 10:51:24PM +0530, Manivannan Sadhasivam wrote:
> Hi,
>
> This series adds OPP (Operating Points) support to UFSHCD driver.
>
> Motivation behind adding OPP support is to scale both clocks as well as
> regulators/performance state dynamically. Currently, UFSHCD just scales
> clock frequency during runtime with the help of "freq-table-hz" property
> defined in devicetree. With the addition of OPP tables in devicetree (as
> done for Qcom SDM845 and SM8250 SoCs in this series) UFSHCD can now scale
> both clocks and performance state of power domain which helps in power
> saving.
>
> For the addition of OPP support to UFSHCD, there are changes required to
> the OPP framework and devfreq drivers. The OPP framework changes are already
> merged and the devfreq change is added in this series.
>
> Credits
> =======
>
> This series is a continuation of previous work by Krzysztof Kozlowski [1].
>
> Testing
> =======
>
> This series is tested on 96Boards RB3 (SDM845 SoC) and RB5 (SM8250 SoC)
> development boards.
>
> Merging Strategy
> ================
>
> Since the devfreq patch got an Ack from the maintainer, either it can be merged
> to scsi tree with rest of the patches or merged separately through devfreq tree.
>
Martin, can you please merge the ufs patches (drivers,bindings) for v6.7? Note
that the devfreq patch already got merged and the above text is outdated (my
bad).
- Mani
> Thanks,
> Mani
>
> [1] https://lore.kernel.org/all/20220513061347.46480-1-krzysztof.kozlowski@linaro.org/
>
> Changes in v7:
>
> * Added missing EXPORT_SYMBOL_GPL() for ufshcd_opp_config_clks() API as reported
> by Alessandro Carminati
>
> Changes in v6:
>
> * Collected tags from Dmitry
> * Fixed bindings issues reported by Krzysztof
>
> Changes in v5:
>
> * Dropped the devfreq patch since it got applied
> * Fixed the bindings issue reported by DT bot
> * Rebased on top of mkp/scsi/for-next
>
> Changes in v4:
>
> * Rebased on top of v6.6-rc3
>
> Changes in v3:
>
> * Rebased on top of linux-next/master tag: next-20230731
> * Dropped the already applied patches (dts, opp binding and framework)
> * Moved the interconnect patches to a separate series:
> https://lore.kernel.org/linux-scsi/20230731145020.41262-1-manivannan.sadhasivam@linaro.org/
> * Moved ufshcd_opp_config_clks() API to ufshcd.c to fix the build failure
> reported by Kbuild bot: https://lore.kernel.org/all/202307210542.KoLHRbU6-lkp@intel.com/
> * Collected Acks
> * v2: https://lore.kernel.org/all/20230720054100.9940-1-manivannan.sadhasivam@linaro.org/
>
> Changes in v2:
>
> * Added more description to the bindings patch 2/15
> * Fixed dev_pm_opp_put() usage in patch 10/15
> * Added a new patch for adding enums for UFS lanes 14/15
> * Changed the icc variables to mem_bw and cfg_bw and used
> the enums for gears and lanes in bw_table
> * Collected review tags
> * Added SCSI list and folks
> * Removed duplicate patches
>
> Krzysztof Kozlowski (2):
> dt-bindings: ufs: common: add OPP table
> arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
>
> Manivannan Sadhasivam (3):
> scsi: ufs: core: Add OPP support for scaling clocks and regulators
> scsi: ufs: host: Add support for parsing OPP
> arm64: dts: qcom: sm8250: Add OPP table support to UFSHC
>
> .../devicetree/bindings/ufs/ufs-common.yaml | 35 +++-
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 42 +++-
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 39 +++-
> drivers/ufs/core/ufshcd.c | 180 ++++++++++++++----
> drivers/ufs/host/ufshcd-pltfrm.c | 78 ++++++++
> include/ufs/ufshcd.h | 7 +
> 6 files changed, 326 insertions(+), 55 deletions(-)
>
> --
> 2.25.1
>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v7 0/5] UFS: Add OPP support
2023-10-16 3:59 ` [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
@ 2023-10-17 0:59 ` Martin K. Petersen
0 siblings, 0 replies; 13+ messages in thread
From: Martin K. Petersen @ 2023-10-17 0:59 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: martin.petersen, alim.akhtar, avri.altman, bvanassche, linux-scsi,
linux-pm, linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb
Manivannan,
> Martin, can you please merge the ufs patches (drivers,bindings) for
> v6.7? Note that the devfreq patch already got merged and the above
> text is outdated (my bad).
Applied to 6.7/scsi-staging, thanks!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: (subset) [PATCH v7 0/5] UFS: Add OPP support
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
` (5 preceding siblings ...)
2023-10-16 3:59 ` [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
@ 2023-10-25 2:19 ` Martin K. Petersen
2023-12-03 4:54 ` Bjorn Andersson
7 siblings, 0 replies; 13+ messages in thread
From: Martin K. Petersen @ 2023-10-25 2:19 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jejb, Manivannan Sadhasivam
Cc: Martin K . Petersen, alim.akhtar, avri.altman, bvanassche,
linux-scsi, linux-pm, linux-arm-msm, devicetree, quic_asutoshd,
quic_cang, quic_nitirawa, quic_narepall, quic_bhaskarv,
quic_richardp, quic_nguyenb, quic_ziqichen, bmasney,
krzysztof.kozlowski, linux-kernel, alessandro.carminati
On Thu, 12 Oct 2023 22:51:24 +0530, Manivannan Sadhasivam wrote:
> This series adds OPP (Operating Points) support to UFSHCD driver.
>
> Motivation behind adding OPP support is to scale both clocks as well as
> regulators/performance state dynamically. Currently, UFSHCD just scales
> clock frequency during runtime with the help of "freq-table-hz" property
> defined in devicetree. With the addition of OPP tables in devicetree (as
> done for Qcom SDM845 and SM8250 SoCs in this series) UFSHCD can now scale
> both clocks and performance state of power domain which helps in power
> saving.
>
> [...]
Applied to 6.7/scsi-queue, thanks!
[1/5] dt-bindings: ufs: common: add OPP table
https://git.kernel.org/mkp/scsi/c/e820de1d115f
[2/5] scsi: ufs: core: Add OPP support for scaling clocks and regulators
https://git.kernel.org/mkp/scsi/c/930bd77ebe3d
[3/5] scsi: ufs: host: Add support for parsing OPP
https://git.kernel.org/mkp/scsi/c/72208ebe181e
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: (subset) [PATCH v7 0/5] UFS: Add OPP support
2023-10-12 17:21 [PATCH v7 0/5] UFS: Add OPP support Manivannan Sadhasivam
` (6 preceding siblings ...)
2023-10-25 2:19 ` (subset) " Martin K. Petersen
@ 2023-12-03 4:54 ` Bjorn Andersson
2023-12-04 12:01 ` Manivannan Sadhasivam
7 siblings, 1 reply; 13+ messages in thread
From: Bjorn Andersson @ 2023-12-03 4:54 UTC (permalink / raw)
To: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, jejb,
martin.petersen, Manivannan Sadhasivam
Cc: alim.akhtar, avri.altman, bvanassche, linux-scsi, linux-pm,
linux-arm-msm, devicetree, quic_asutoshd, quic_cang,
quic_nitirawa, quic_narepall, quic_bhaskarv, quic_richardp,
quic_nguyenb, quic_ziqichen, bmasney, krzysztof.kozlowski,
linux-kernel, alessandro.carminati
On Thu, 12 Oct 2023 22:51:24 +0530, Manivannan Sadhasivam wrote:
> This series adds OPP (Operating Points) support to UFSHCD driver.
>
> Motivation behind adding OPP support is to scale both clocks as well as
> regulators/performance state dynamically. Currently, UFSHCD just scales
> clock frequency during runtime with the help of "freq-table-hz" property
> defined in devicetree. With the addition of OPP tables in devicetree (as
> done for Qcom SDM845 and SM8250 SoCs in this series) UFSHCD can now scale
> both clocks and performance state of power domain which helps in power
> saving.
>
> [...]
Applied, thanks!
[4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
commit: ec987b5efd59fdea4178d824d8ec4bbdf3019bdf
[5/5] arm64: dts: qcom: sm8250: Add OPP table support to UFSHC
commit: 725be1d6318e4ea7e3947fd4242a14cf589cfebf
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: (subset) [PATCH v7 0/5] UFS: Add OPP support
2023-12-03 4:54 ` Bjorn Andersson
@ 2023-12-04 12:01 ` Manivannan Sadhasivam
0 siblings, 0 replies; 13+ messages in thread
From: Manivannan Sadhasivam @ 2023-12-04 12:01 UTC (permalink / raw)
To: Bjorn Andersson
Cc: vireshk, nm, sboyd, myungjoo.ham, kyungmin.park, cw00.choi,
konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, jejb,
martin.petersen, Manivannan Sadhasivam, alim.akhtar, avri.altman,
bvanassche, linux-scsi, linux-pm, linux-arm-msm, devicetree,
quic_asutoshd, quic_cang, quic_nitirawa, quic_narepall,
quic_bhaskarv, quic_richardp, quic_nguyenb, quic_ziqichen,
bmasney, krzysztof.kozlowski, linux-kernel, alessandro.carminati
On Sat, Dec 02, 2023 at 08:54:46PM -0800, Bjorn Andersson wrote:
>
> On Thu, 12 Oct 2023 22:51:24 +0530, Manivannan Sadhasivam wrote:
> > This series adds OPP (Operating Points) support to UFSHCD driver.
> >
> > Motivation behind adding OPP support is to scale both clocks as well as
> > regulators/performance state dynamically. Currently, UFSHCD just scales
> > clock frequency during runtime with the help of "freq-table-hz" property
> > defined in devicetree. With the addition of OPP tables in devicetree (as
> > done for Qcom SDM845 and SM8250 SoCs in this series) UFSHCD can now scale
> > both clocks and performance state of power domain which helps in power
> > saving.
> >
> > [...]
>
> Applied, thanks!
>
> [4/5] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
> commit: ec987b5efd59fdea4178d824d8ec4bbdf3019bdf
> [5/5] arm64: dts: qcom: sm8250: Add OPP table support to UFSHC
> commit: 725be1d6318e4ea7e3947fd4242a14cf589cfebf
>
Bjorn, could you please drop these two patches? I found the OPP regression in
the ufs-qcom driver due to some patches that got merged last cycle. Nitin is
working on a fix for that. So I'd like to defer merging of these dts patches to
v6.9.
I can resend them after v6.8-rc1.
- Mani
> Best regards,
> --
> Bjorn Andersson <andersson@kernel.org>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply [flat|nested] 13+ messages in thread