Re: [RFC,v14 4/5] arm64: tegra: Add PCIe port node with PCIe WAKE# for C1 controller

[Manivannan Sadhasivam <mani@kernel.org>]

On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy wrote:
> Add PCIe port node under the PCIe controller-1 device tree node to support
> PCIe WAKE# interrupt for WiFi.
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> 
> Changes in v14:
> New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX Orin.
> 
>  .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts     | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> index 8a9747855d6b..9c89be263141 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> @@ -2147,6 +2147,17 @@ pcie@14100000 {
>  
>  			phys = <&p2u_hsio_3>;
>  			phy-names = "p2u-0";
> +
> +			pci@0,0 {
> +				reg = <0x0000 0 0 0 0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +
> +				interrupt-parent = <&gpio>;
> +				interrupts = <TEGRA234_MAIN_GPIO(L, 2) IRQ_TYPE_LEVEL_LOW>;
> +				interrupt-names = "wakeup";

WAKE# should be part of the PCIe controller, not device. And the interrupt name
should be "wake".

- Mani

> +			};
>  		};
>  
>  		pcie@14160000 {
> -- 
> 2.25.1
> 

-- 
மணிவண்ணன் சதாசிவம்