From: Frank Li <Frank.Li@nxp.com>
To: imx@lists.linux.dev, "Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
linux-pci@vger.kernel.org (open list:PCI DRIVER FOR IMX6),
linux-arm-kernel@lists.infradead.org (moderated list:PCI DRIVER
FOR IMX6),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 2/9] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY
Date: Wed, 6 Dec 2023 10:58:56 -0500 [thread overview]
Message-ID: <20231206155903.566194-3-Frank.Li@nxp.com> (raw)
In-Reply-To: <20231206155903.566194-1-Frank.Li@nxp.com>
Refactors the phy handling logic in the imx6 PCI driver by adding
IMX6_PCIE_FLAG_HAS_PHY bitmask define for drvdata::flags.
The drvdata::flags and a bitmask ensures a cleaner and more scalable
switch-case structure for handling phy.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 8a9b527934f8..bcf52aa86462 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -62,6 +62,7 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
#define IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI BIT(3)
#define IMX6_PCIE_FLAG_HAS_CLK_AUX BIT(4)
+#define IMX6_PCIE_FLAG_HAS_PHY BIT(5)
#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
@@ -1327,6 +1328,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
"pcie_aux clock source missing or invalid\n");
}
+ if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHY)) {
+ imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+ if (IS_ERR(imx6_pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+ "failed to get pcie phy\n");
+ }
+
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
@@ -1356,11 +1364,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
"failed to get pcie apps reset control\n");
- imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
- if (IS_ERR(imx6_pcie->phy))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
- "failed to get pcie phy\n");
-
break;
default:
break;
@@ -1500,24 +1503,28 @@ static const struct imx6_pcie_drvdata drvdata[] = {
[IMX8MM] = {
.variant = IMX8MM,
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
- IMX6_PCIE_FLAG_HAS_CLK_AUX,
+ IMX6_PCIE_FLAG_HAS_CLK_AUX |
+ IMX6_PCIE_FLAG_HAS_PHY,
.gpr = "fsl,imx8mm-iomuxc-gpr",
},
[IMX8MP] = {
.variant = IMX8MP,
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
- IMX6_PCIE_FLAG_HAS_CLK_AUX,
+ IMX6_PCIE_FLAG_HAS_CLK_AUX |
+ IMX6_PCIE_FLAG_HAS_PHY,
.gpr = "fsl,imx8mp-iomuxc-gpr",
},
[IMX8MQ_EP] = {
.variant = IMX8MQ_EP,
- .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
+ .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX |
+ IMX6_PCIE_FLAG_HAS_PHY,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mq-iomuxc-gpr",
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
- .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
+ .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX |
+ IMX6_PCIE_FLAG_HAS_PHY,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mm-iomuxc-gpr",
},
--
2.34.1
next prev parent reply other threads:[~2023-12-06 15:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-06 15:58 [PATCH 0/9] PCI: imx6: Clean up and add imx95 pci support Frank Li
2023-12-06 15:58 ` [PATCH 1/9] PCI: imx6: Simplify clock handling by using HAS_CLK_* bitmask Frank Li
2023-12-06 15:58 ` Frank Li [this message]
2023-12-06 15:58 ` [PATCH 3/9] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2023-12-06 16:52 ` Philipp Zabel
2023-12-07 17:10 ` Frank Li
2023-12-08 11:49 ` Philipp Zabel
2023-12-06 15:58 ` [PATCH 4/9] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2023-12-06 16:36 ` Bjorn Helgaas
2023-12-06 16:50 ` Frank Li
2023-12-06 16:59 ` Bjorn Helgaas
2023-12-06 17:07 ` Frank Li
2023-12-06 15:58 ` [PATCH 5/9] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2023-12-06 15:59 ` [PATCH 6/9] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2023-12-07 10:38 ` kernel test robot
2023-12-06 15:59 ` [PATCH 7/9] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2023-12-07 9:35 ` kernel test robot
2023-12-06 15:59 ` [PATCH 8/9] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2023-12-07 8:30 ` Krzysztof Kozlowski
2023-12-06 15:59 ` [PATCH 9/9] PCI: imx6: Add iMX95 PCIe support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231206155903.566194-3-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).