[net-next PATCH 1/2] dt-bindings: Document QCA808x PHYs

[Christian Marangi <ansuelsmth@gmail.com>]

Add Documentation for QCA808x PHYs for the additional property for the
active high LED setting and also document the LED configuration for this
PHY.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/net/qca,qca808x.yaml  | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qca,qca808x.yaml

diff --git a/Documentation/devicetree/bindings/net/qca,qca808x.yaml b/Documentation/devicetree/bindings/net/qca,qca808x.yaml
new file mode 100644
index 000000000000..73cfff357311
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,qca808x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,qca808x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA808X PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  Bindings for Qualcomm Atheros QCA808X PHYs
+
+  QCA808X PHYs can have up to 3 LEDs attached.
+  All 3 LEDs are disabled by default.
+  2 LEDs have dedicated pins with the 3rd LED having the
+  double function of Interrupt LEDs/GPIO or additional LED.
+
+  By default this special PIN is set to LED function.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ethernet-phy-id004d.d101
+  required:
+    - compatible
+
+properties:
+  qca,led-active-high:
+    description: Set all the LEDs to active high to be turned on.
+    type: boolean
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id004d.d101";
+            reg = <0>;
+            qca,led-active-high;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_WAN;
+                    default-state = "keep";
+                };
+            };
+        };
+    };
-- 
2.40.1