[PATCH v5 00/10] Add displays support for bsh-smm-s2/pro boards

[PATCH v5 00/10] Add displays support for bsh-smm-s2/pro boards

[Dario Binacchi]

The series adds drivers for the displays used by bsh-smm-s2/pro boards.
This required applying some patches to the samsung-dsim driver and the
drm_bridge.c module.

Changes in v5:
- Replace a 'return ret' with a 'goto fail' in the r63353_panel_activate()
- Add 'Reviewed-by' tag of Krzysztof Kozlowski

Changes in v4:
- Set the reset gpio to low in a single operation
- Remove duplicated code for prepare/unprepare callbacks
- Remove duplicated code for prepare/unprepare callbacks
- Add Reviewed-by tag of Neil Armstrong

Changes in v3:
- Add 'Reviewed-by' tag of Krzysztof Kozlowski.
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Drop power-supply
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties
- Adjust the timings of the panel reset
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Dario Binacchi (4):
  drm/bridge: Fix bridge disable logic
  drm/bridge: Fix a use case in the bridge disable logic
  drm: bridge: samsung-dsim: enter display mode in the enable() callback
  drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Michael Trimarchi (6):
  dt-bindings: display: panel: Add synaptics r63353 panel controller
  drm/panel: Add Synaptics R63353 panel driver
  dt-bindings: display: panel: Add Ilitek ili9805 panel controller
  drm/panel: Add Ilitek ILI9805 panel driver
  drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

 .../display/panel/ilitek,ili9805.yaml         |  62 +++
 .../display/panel/synaptics,r63353.yaml       |  61 +++
 MAINTAINERS                                   |  12 +
 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++
 drivers/gpu/drm/bridge/samsung-dsim.c         |  14 +-
 drivers/gpu/drm/drm_bridge.c                  |   9 +-
 drivers/gpu/drm/panel/Kconfig                 |  18 +
 drivers/gpu/drm/panel/Makefile                |   2 +
 drivers/gpu/drm/panel/panel-ilitek-ili9805.c  | 406 ++++++++++++++++++
 .../gpu/drm/panel/panel-synaptics-r63353.c    | 363 ++++++++++++++++
 11 files changed, 1062 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
 create mode 100644 Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
 create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9805.c
 create mode 100644 drivers/gpu/drm/panel/panel-synaptics-r63353.c

-- 
2.43.0

[PATCH v5 05/10] dt-bindings: display: panel: Add synaptics r63353 panel controller

[Dario Binacchi]

From: Michael Trimarchi <michael@amarulasolutions.com>

Add documentation for "synaptics,r63353" panel.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

(no changes since v3)

Changes in v3:
- Add 'Reviewed-by' tag of Krzysztof Kozlowski.
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.

Changes in v2:
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties

 .../display/panel/synaptics,r63353.yaml       | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
new file mode 100644
index 000000000000..e5617d125567
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics R63353 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls068b3sx02
+      - const: syna,r63353
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls068b3sx02", "syna,r63353";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.43.0

[PATCH v5 07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller

[Dario Binacchi]

From: Michael Trimarchi <michael@amarulasolutions.com>

Add documentation for "ilitek,ili9805" panel.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v5:
- Add 'Reviewed-by' tag of Krzysztof Kozlowski

Changes in v3:
- Drop power-supply

Changes in v2:
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties

 .../display/panel/ilitek,ili9805.yaml         | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
new file mode 100644
index 000000000000..f4f91f93f490
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - giantplus,gpm1790a0
+          - tianma,tm041xdhg01
+      - const: ilitek,ili9805
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.43.0

[PATCH v5 10/10] arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

[Dario Binacchi]

From: Michael Trimarchi <michael@amarulasolutions.com>

Add the display and nodes required for its operation.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

(no changes since v3)

Changes in v3:
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++++++++++++++
 2 files changed, 122 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d438f1..bbb07c650da9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..f0a924cbe548
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+};
+
+&lcdif {
+	status = "okay";
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: pwm1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+};
-- 
2.43.0

Re: (subset) [PATCH v5 00/10] Add displays support for bsh-smm-s2/pro boards

[Neil Armstrong]

Hi,

On Thu, 07 Dec 2023 15:16:29 +0100, Dario Binacchi wrote:
> The series adds drivers for the displays used by bsh-smm-s2/pro boards.
> This required applying some patches to the samsung-dsim driver and the
> drm_bridge.c module.
> 
> Changes in v5:
> - Replace a 'return ret' with a 'goto fail' in the r63353_panel_activate()
> - Add 'Reviewed-by' tag of Krzysztof Kozlowski
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[06/10] drm/panel: Add Synaptics R63353 panel driver
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=2e87bad7cd339882cf26b7101a1c87dab71962c9
[07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=549240c98e50207244bc1ac182622b8daba89a89
[08/10] drm/panel: Add Ilitek ILI9805 panel driver
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=edbf1d506ebe8c0857c406bd5d5b81d46ffd8437
[09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
        https://cgit.freedesktop.org/drm/drm-misc/commit/?id=b1fcb7ee3707290466b2cc4956325fb91f09f13b

-- 
Neil

Re: (subset) [PATCH v5 00/10] Add displays support for bsh-smm-s2/pro boards

[Dario Binacchi]

Hi Neil,

On Mon, Dec 11, 2023 at 10:16 AM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
>
> Hi,
>
> On Thu, 07 Dec 2023 15:16:29 +0100, Dario Binacchi wrote:
> > The series adds drivers for the displays used by bsh-smm-s2/pro boards.
> > This required applying some patches to the samsung-dsim driver and the
> > drm_bridge.c module.
> >
> > Changes in v5:
> > - Replace a 'return ret' with a 'goto fail' in the r63353_panel_activate()
> > - Add 'Reviewed-by' tag of Krzysztof Kozlowski
> >
> > [...]
>
> Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
>
> [06/10] drm/panel: Add Synaptics R63353 panel driver
>         https://cgit.freedesktop.org/drm/drm-misc/commit/?id=2e87bad7cd339882cf26b7101a1c87dab71962c9
> [07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller
>         https://cgit.freedesktop.org/drm/drm-misc/commit/?id=549240c98e50207244bc1ac182622b8daba89a89
> [08/10] drm/panel: Add Ilitek ILI9805 panel driver
>         https://cgit.freedesktop.org/drm/drm-misc/commit/?id=edbf1d506ebe8c0857c406bd5d5b81d46ffd8437
> [09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
>         https://cgit.freedesktop.org/drm/drm-misc/commit/?id=b1fcb7ee3707290466b2cc4956325fb91f09f13b
>
> --
> Neil
>

I think you forgot the patch:
[05/10] dt-bindings: display: panel: Add synaptics r63353 panel controller

I received an email complaining about the lack of documentation for
the Synaptics panel.

Thanks and regards,
Dario

--

Dario Binacchi

Senior Embedded Linux Developer

dario.binacchi@amarulasolutions.com

__________________________________


Amarula Solutions SRL

Via Le Canevare 30, 31100 Treviso, Veneto, IT

T. +39 042 243 5310
info@amarulasolutions.com

www.amarulasolutions.com

Re: [PATCH v5 10/10] arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

[Shawn Guo]

On Thu, Dec 07, 2023 at 03:16:39PM +0100, Dario Binacchi wrote:
> From: Michael Trimarchi <michael@amarulasolutions.com>
> 
> Add the display and nodes required for its operation.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> 
> ---
> 
> (no changes since v3)
> 
> Changes in v3:
> - Replace "synaptics,r63353" compatible with "syna,r63353", as
>   required by vendor-prefixes.yaml.
> - Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
>   into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.
> 
> Changes in v2:
> - Adjust the mipi_dsi node based on the latest patches merged into
>   the mainline in the dtsi files it includes.
> - Added to the series the following patches:
>   - 0001 drm/bridge: Fix bridge disable logic
>   - 0002 drm/bridge: Fix a use case in the bridge disable logic
>   - 0003 samsung-dsim: enter display mode in the enable() callback
>   - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting
> 
>  .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
>  .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++++++++++++++
>  2 files changed, 122 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
> index 22a754d438f1..bbb07c650da9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
> @@ -7,6 +7,7 @@
>  /dts-v1/;
>  
>  #include "imx8mn.dtsi"
> +#include "imx8mn-bsh-smm-s2-display.dtsi"
>  
>  / {
>  	chosen {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
> new file mode 100644
> index 000000000000..f0a924cbe548
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2021 BSH
> + */
> +
> +/ {
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
> +		brightness-levels = <0 100>;
> +		num-interpolated-steps = <100>;
> +		default-brightness-level = <50>;
> +		status = "okay";
> +	};
> +
> +	reg_3v3_dvdd: regulator-3v3-O3 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_dvdd>;
> +		regulator-name = "3v3-dvdd-supply";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	reg_v3v3_avdd: regulator-3v3-O2 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_avdd>;
> +		regulator-name = "3v3-avdd-supply";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
> +	};
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_bl>;

We usually end property list with 'status'.

> +};
> +
> +&lcdif {
> +	status = "okay";

Ditto

> +	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
> +	assigned-clock-rates = <594000000>;
> +};
> +
> +&pgc_dispmix {
> +	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
> +	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
> +	assigned-clock-rates = <500000000>, <200000000>;
> +};
> +
> +&mipi_dsi {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";

Ditto

> +	samsung,esc-clock-frequency = <20000000>;
> +	samsung,pll-clock-frequency = <12000000>;
> +
> +	panel@0 {
> +		compatible = "sharp,ls068b3sx02", "syna,r63353";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_panel>;
> +		reg = <0>;
> +
> +		backlight = <&backlight>;
> +		dvdd-supply = <&reg_3v3_dvdd>;
> +		avdd-supply = <&reg_v3v3_avdd>;
> +		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&mipi_dsi_out>;
> +			};
> +		};
> +
> +	};
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;

Have a newline between properties and child node.

> +			mipi_dsi_out: endpoint {
> +				remote-endpoint = <&panel_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&gpu {
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +
> +	/* This is for both PWM and voltage regulators for display */
> +	pinctrl_bl: pwm1grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
> +		>;
> +	};
> +
> +	pinctrl_panel: panelgrp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
> +		>;
> +	};
> +
> +	pinctrl_dvdd: dvddgrp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
> +		>;
> +	};
> +
> +	pinctrl_avdd: avddgrp {

Can we sort the pinctrl node alphabetically?

Shawn

> +		fsl,pins = <
> +			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
> +		>;
> +	};
> +};
> -- 
> 2.43.0
>