From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] arm64: dts: imx8qxp: Add audio clock mux node
Date: Thu, 14 Dec 2023 16:02:40 +0100 [thread overview]
Message-ID: <20231214150243.1991532-3-alexander.stein@ew.tq-group.com> (raw)
In-Reply-To: <20231214150243.1991532-1-alexander.stein@ew.tq-group.com>
The audio clock mux (ACM) selects the input clock for each attached
consumer, referenced by clock-cell.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
This node is essentially copied from
Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml.
.../boot/dts/freescale/imx8-ss-audio.dtsi | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index f080be75c4219..61ef0272b06e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -289,4 +289,63 @@ aud_pll_div1_lpcg: clock-controller@59d30000 {
clock-output-names = "aud_pll_div_clk1_lpcg_clk";
power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
};
+
+ acm: acm@59e00000 {
+ compatible = "fsl,imx8qxp-acm";
+ reg = <0x59e00000 0x1d0000>;
+ #clock-cells = <1>;
+ power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+ <&pd IMX_SC_R_AUDIO_CLK_1>,
+ <&pd IMX_SC_R_MCLK_OUT_0>,
+ <&pd IMX_SC_R_MCLK_OUT_1>,
+ <&pd IMX_SC_R_AUDIO_PLL_0>,
+ <&pd IMX_SC_R_AUDIO_PLL_1>,
+ <&pd IMX_SC_R_ASRC_0>,
+ <&pd IMX_SC_R_ASRC_1>,
+ <&pd IMX_SC_R_ESAI_0>,
+ <&pd IMX_SC_R_SAI_0>,
+ <&pd IMX_SC_R_SAI_1>,
+ <&pd IMX_SC_R_SAI_2>,
+ <&pd IMX_SC_R_SAI_3>,
+ <&pd IMX_SC_R_SAI_4>,
+ <&pd IMX_SC_R_SAI_5>,
+ <&pd IMX_SC_R_SPDIF_0>,
+ <&pd IMX_SC_R_MQS_0>;
+ clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+ <&clk_ext_aud_mclk0>,
+ <&clk_ext_aud_mclk1>,
+ <&clk_esai0_rx_clk>,
+ <&clk_esai0_rx_hf_clk>,
+ <&clk_esai0_tx_clk>,
+ <&clk_esai0_tx_hf_clk>,
+ <&clk_spdif0_rx>,
+ <&clk_sai0_rx_bclk>,
+ <&clk_sai0_tx_bclk>,
+ <&clk_sai1_rx_bclk>,
+ <&clk_sai1_tx_bclk>,
+ <&clk_sai2_rx_bclk>,
+ <&clk_sai3_rx_bclk>,
+ <&clk_sai4_rx_bclk>;
+ clock-names = "aud_rec_clk0_lpcg_clk",
+ "aud_rec_clk1_lpcg_clk",
+ "aud_pll_div_clk0_lpcg_clk",
+ "aud_pll_div_clk1_lpcg_clk",
+ "ext_aud_mclk0",
+ "ext_aud_mclk1",
+ "esai0_rx_clk",
+ "esai0_rx_hf_clk",
+ "esai0_tx_clk",
+ "esai0_tx_hf_clk",
+ "spdif0_rx",
+ "sai0_rx_bclk",
+ "sai0_tx_bclk",
+ "sai1_rx_bclk",
+ "sai1_tx_bclk",
+ "sai2_rx_bclk",
+ "sai3_rx_bclk",
+ "sai4_rx_bclk";
+ };
};
--
2.34.1
next prev parent reply other threads:[~2023-12-14 15:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 15:02 [PATCH 0/5] TQMa8Xx (imx8qxp) audio support Alexander Stein
2023-12-14 15:02 ` [PATCH 1/5] arm64: dts: imx8qxp: Add ACM input clock gates Alexander Stein
2023-12-14 15:02 ` Alexander Stein [this message]
2023-12-14 15:02 ` [PATCH 3/5] arm64: dts: imx8qxp: Add audio SAI nodes Alexander Stein
2023-12-14 15:02 ` [PATCH 4/5] arm64: dts: imx8qxp: Add mclkout clock gates Alexander Stein
2023-12-14 15:02 ` [PATCH 5/5] arm64: dts: imx8qxp: mba8xx: Add analog audio output on MBa8Xx Alexander Stein
2024-01-29 17:08 ` [PATCH 0/5] TQMa8Xx (imx8qxp) audio support Frank Li
2024-02-01 10:02 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231214150243.1991532-3-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).