From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [RFC PATCH 4/4] iio: adc: rcar-gyroadc: use __free(device_node)
Date: Sun, 17 Dec 2023 18:46:48 +0000 [thread overview]
Message-ID: <20231217184648.185236-5-jic23@kernel.org> (raw)
In-Reply-To: <20231217184648.185236-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using automated cleanup to replace of_node_put() handling allows for
a simplfied flow by enabling direct returns on errors.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/adc/rcar-gyroadc.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index d524f2e8e927..9d6227b31724 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -318,7 +318,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
struct rcar_gyroadc *priv = iio_priv(indio_dev);
struct device *dev = priv->dev;
struct device_node *np = dev->of_node;
- struct device_node *child;
+ struct device_node *child __free(device_node) = NULL;
struct regulator *vref;
unsigned int reg;
unsigned int adcmode = -1, childmode;
@@ -352,7 +352,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
break;
default:
- goto err_e_inval;
+ return -EINVAL;
}
/*
@@ -369,7 +369,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Failed to get child reg property of ADC \"%pOFn\".\n",
child);
- goto err_of_node_put;
+ return ret;
}
/* Channel number is too high. */
@@ -377,7 +377,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Only %i channels supported with %pOFn, but reg = <%i>.\n",
num_channels, child, reg);
- goto err_e_inval;
+ return -EINVAL;
}
}
@@ -386,7 +386,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Channel %i uses different ADC mode than the rest.\n",
reg);
- goto err_e_inval;
+ return -EINVAL;
}
/* Channel is valid, grab the regulator. */
@@ -396,8 +396,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
if (IS_ERR(vref)) {
dev_dbg(dev, "Channel %i 'vref' supply not connected.\n",
reg);
- ret = PTR_ERR(vref);
- goto err_of_node_put;
+ return PTR_ERR(vref);
}
priv->vref[reg] = vref;
@@ -422,7 +421,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
* we can stop parsing here.
*/
if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
- of_node_put(child);
break;
}
}
@@ -433,12 +431,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
}
return 0;
-
-err_e_inval:
- ret = -EINVAL;
-err_of_node_put:
- of_node_put(child);
- return ret;
}
static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
--
2.43.0
prev parent reply other threads:[~2023-12-17 18:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-17 18:46 [RFC PATCH 0/4] of: Automate handling of of_node_put() Jonathan Cameron
2023-12-17 18:46 ` [RFC PATCH 1/4] of: Add cleanup.h based autorelease via __free(device_node) markings Jonathan Cameron
2023-12-20 22:11 ` Rob Herring
2023-12-21 10:54 ` Jonathan Cameron
2024-01-08 12:53 ` Jonathan Cameron
2024-01-14 16:39 ` Jonathan Cameron
2023-12-17 18:46 ` [RFC PATCH 2/4] of: unittest: Use __free(device_node) Jonathan Cameron
2023-12-17 18:46 ` [RFC PATCH 3/4] iio: adc: fsl-imx25-gcq: " Jonathan Cameron
2023-12-17 18:46 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231217184648.185236-5-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).