From: Alex Soo <yuklin.soo@starfivetech.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Hal Feng <hal.feng@starfivetech.com>,
"Ley Foon Tan" <leyfoon.tan@starfivetech.com>,
Jianlong Huang <jianlong.huang@starfivetech.com>,
Emil Renner Berthing <kernel@esmil.dk>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
"Drew Fustini" <drew@beagleboard.org>
Cc: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-riscv@lists.infradead.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alex Soo <yuklin.soo@starfivetech.com>
Subject: [RFC PATCH 0/6] Add Pinctrl driver for Starfive JH8100 SoC
Date: Thu, 21 Dec 2023 16:36:16 +0800 [thread overview]
Message-ID: <20231221083622.3445726-1-yuklin.soo@starfivetech.com> (raw)
Starfive JH8100 SoC consists of 4 pinctrl domains - sys_east,
sys_west, sys_gmac, and aon. This patch series adds pinctrl
drivers for these 4 pinctrl domains and this patch series is
depending on the JH8100 base patch series in [1] and [2].
The relevant dt-binding documentation for each pinctrl domain has
been updated accordingly.
[1] https://lore.kernel.org/lkml/20231201121410.95298-1-jeeheng.sia@starfivetech.com/
[2] https://lore.kernel.org/lkml/20231206115000.295825-1-jeeheng.sia@starfivetech.com/
Alex Soo (6):
dt-bindings: pinctrl: starfive: add JH8100 pinctrl bindings
pinctrl: starfive: jh8100: add pinctrl driver for sys_east domain
pinctrl: starfive: jh8100: add pinctrl driver for sys_west domain
pinctrl: starfive: jh8100: add pinctrl driver for sys_gmac domain
pinctrl: starfive: jh8100: add pinctrl driver for AON domain
riscv: dts: starfive: jh8100: add pinctrl device tree nodes
.../pinctrl/starfive,jh8100-aon-pinctrl.yaml | 183 +++
.../starfive,jh8100-sys-east-pinctrl.yaml | 188 +++
.../starfive,jh8100-sys-gmac-pinctrl.yaml | 124 ++
.../starfive,jh8100-sys-west-pinctrl.yaml | 188 +++
MAINTAINERS | 7 +
arch/riscv/boot/dts/starfive/jh8100-evb.dts | 5 +
arch/riscv/boot/dts/starfive/jh8100-pinfunc.h | 418 +++++++
arch/riscv/boot/dts/starfive/jh8100.dtsi | 44 +
drivers/pinctrl/starfive/Kconfig | 57 +
drivers/pinctrl/starfive/Makefile | 6 +
.../starfive/pinctrl-starfive-jh8100-aon.c | 241 ++++
.../pinctrl-starfive-jh8100-sys-east.c | 326 +++++
.../pinctrl-starfive-jh8100-sys-gmac.c | 164 +++
.../pinctrl-starfive-jh8100-sys-west.c | 264 ++++
.../starfive/pinctrl-starfive-jh8100.c | 1090 +++++++++++++++++
.../starfive/pinctrl-starfive-jh8100.h | 85 ++
.../pinctrl/starfive,jh8100-pinctrl.h | 303 +++++
17 files changed, 3693 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh8100-aon-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh8100-sys-east-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh8100-sys-gmac-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh8100-sys-west-pinctrl.yaml
create mode 100644 arch/riscv/boot/dts/starfive/jh8100-pinfunc.h
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-aon.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-east.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-west.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
create mode 100644 include/dt-bindings/pinctrl/starfive,jh8100-pinctrl.h
base-commit: ddb42e41c0991b443dd6cc97213b478a7324d72b
--
2.25.1
next reply other threads:[~2023-12-21 8:36 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-21 8:36 Alex Soo [this message]
2023-12-21 8:36 ` [RFC PATCH 1/6] dt-bindings: pinctrl: starfive: add JH8100 pinctrl bindings Alex Soo
2023-12-21 9:25 ` Rob Herring
2023-12-21 13:57 ` Linus Walleij
2023-12-21 15:45 ` Krzysztof Kozlowski
2024-01-04 3:12 ` Yuklin Soo
2024-01-04 18:07 ` Conor Dooley
2024-01-04 2:57 ` Yuklin Soo
2023-12-21 15:49 ` Krzysztof Kozlowski
2024-02-07 2:42 ` Yuklin Soo
2024-02-20 8:09 ` Krzysztof Kozlowski
2024-03-05 12:00 ` Yuklin Soo
2024-03-05 14:07 ` Krzysztof Kozlowski
2024-03-27 11:25 ` Yuklin Soo
2023-12-21 8:36 ` [RFC PATCH 2/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_east domain Alex Soo
2024-01-27 23:33 ` Linus Walleij
2024-02-20 5:55 ` Yuklin Soo
2023-12-21 8:36 ` [RFC PATCH 3/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_west domain Alex Soo
2023-12-21 8:36 ` [RFC PATCH 4/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_gmac domain Alex Soo
2023-12-21 8:36 ` [RFC PATCH 5/6] pinctrl: starfive: jh8100: add pinctrl driver for AON domain Alex Soo
2023-12-21 8:36 ` [RFC PATCH 6/6] riscv: dts: starfive: jh8100: add pinctrl device tree nodes Alex Soo
2023-12-21 15:53 ` Krzysztof Kozlowski
2024-02-07 3:09 ` Yuklin Soo
2023-12-21 16:19 ` [RFC PATCH 0/6] Add Pinctrl driver for Starfive JH8100 SoC Krzysztof Kozlowski
2024-01-04 8:28 ` Yuklin Soo
2023-12-22 17:58 ` Linus Walleij
2024-02-20 5:38 ` Yuklin Soo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231221083622.3445726-1-yuklin.soo@starfivetech.com \
--to=yuklin.soo@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=bartosz.golaszewski@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=drew@beagleboard.org \
--cc=hal.feng@starfivetech.com \
--cc=jianlong.huang@starfivetech.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leyfoon.tan@starfivetech.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).