From: Jonathan Cameron <jic23@kernel.org>
To: Petre Rodan <petre.rodan@subdimension.ro>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Andreas Klinger <ak@it-klinger.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix
Date: Tue, 26 Dec 2023 16:31:28 +0000 [thread overview]
Message-ID: <20231226163128.09bf0f4e@jic23-huawei> (raw)
In-Reply-To: <20231226162839.5ceddc9e@jic23-huawei>
On Tue, 26 Dec 2023 16:28:39 +0000
Jonathan Cameron <jic23@kernel.org> wrote:
> On Sun, 24 Dec 2023 16:34:46 +0200
> Petre Rodan <petre.rodan@subdimension.ro> wrote:
>
> > Define enum inside the honeywell,transfer-function property block.
> >
> > Set the correct irq edge in the example block.
> > Based on the datasheet, in table 13 on page 11:
> > "End-of-conversion indicator: This pin is set high when a measurement
> > and calculation have been completed and the data is ready to be
> > clocked out"
> >
> > Add description on End-of-conversion interrupt.
> >
> > Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
> > Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> What's the relationship between Andreas and this patch?
>
> Petre seems to have sent it so either Andreas should have a Co-authored-by or
Co-developed-by: that is.
> should be the author... Or not there at all
>
> Thanks,
>
> Jonathan
>
> > ---
> > .../bindings/iio/pressure/honeywell,mprls0025pa.yaml | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
> > index d9e903fbfd99..84ced4e5a7da 100644
> > --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
> > +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
> > @@ -42,6 +42,10 @@ properties:
> > maxItems: 1
> >
> > interrupts:
> > + description:
> > + Optional interrupt for indicating End-of-conversion.
> > + If not present, the driver loops for a while until the received status
> > + byte indicates correct measurement.
> > maxItems: 1
> >
> > reset-gpios:
> > @@ -65,6 +69,7 @@ properties:
> > 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
> > 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
> > 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
> > + enum: [1, 2, 3]
> > $ref: /schemas/types.yaml#/definitions/uint32
> >
> > vdd-supply:
> > @@ -93,7 +98,7 @@ examples:
> > reg = <0x18>;
> > reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> > interrupt-parent = <&gpio3>;
> > - interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
> > + interrupts = <21 IRQ_TYPE_EDGE_RISING>;
> > honeywell,pmin-pascal = <0>;
> > honeywell,pmax-pascal = <172369>;
> > honeywell,transfer-function = <1>;
> > --
> > 2.41.0
> >
>
>
next prev parent reply other threads:[~2023-12-26 16:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-24 14:34 [PATCH v2 00/10] changes to mprls0025pa Petre Rodan
2023-12-24 14:34 ` [PATCH v2 01/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml fix Petre Rodan
2023-12-25 12:55 ` Krzysztof Kozlowski
2023-12-26 16:28 ` Jonathan Cameron
2023-12-26 16:31 ` Jonathan Cameron [this message]
2023-12-27 7:11 ` Petre Rodan
2023-12-30 11:28 ` Jonathan Cameron
2023-12-24 14:34 ` [PATCH v2 02/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet Petre Rodan
2023-12-25 12:57 ` Krzysztof Kozlowski
2023-12-25 13:23 ` Petre Rodan
2023-12-25 13:34 ` Krzysztof Kozlowski
2023-12-25 13:37 ` Krzysztof Kozlowski
2023-12-25 13:58 ` Petre Rodan
2023-12-24 14:34 ` [PATCH v2 03/10] dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus Petre Rodan
2023-12-25 12:59 ` Krzysztof Kozlowski
2023-12-25 15:13 ` Petre Rodan
2023-12-25 18:56 ` Krzysztof Kozlowski
2023-12-25 20:29 ` Petre Rodan
2023-12-26 9:38 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231226163128.09bf0f4e@jic23-huawei \
--to=jic23@kernel.org \
--cc=ak@it-klinger.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petre.rodan@subdimension.ro \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).