From: "Rafał Miłecki" <zajec5@gmail.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH 2/2] arm64: dts: mediatek: mt7986: reorder nodes
Date: Fri, 29 Dec 2023 08:57:39 +0100 [thread overview]
Message-ID: <20231229075739.8328-2-zajec5@gmail.com> (raw)
In-Reply-To: <20231229075739.8328-1-zajec5@gmail.com>
From: Rafał Miłecki <rafal@milecki.pl>
Use order described as preferred in DTS Coding Style:
1. Sort bus nodes by unit address
2. Use alpha-numerical order for the rest
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 118 +++++++++++-----------
1 file changed, 59 insertions(+), 59 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 23feeff881de..a0f28b9ada18 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -16,13 +16,6 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- clk40m: oscillator-40m {
- compatible = "fixed-clock";
- clock-frequency = <40000000>;
- #clock-cells = <0>;
- clock-output-names = "clkxtal";
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -59,6 +52,13 @@ cpu3: cpu@3 {
};
};
+ clk40m: oscillator-40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "clkxtal";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -121,15 +121,6 @@ wo_boot: wo-boot@15194000 {
};
- timer {
- compatible = "arm,armv8-timer";
- interrupt-parent = <&gic>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-
soc {
compatible = "simple-bus";
ranges;
@@ -202,6 +193,20 @@ pio: pinctrl@1001f000 {
#interrupt-cells = <2>;
};
+ pwm: pwm@10048000 {
+ compatible = "mediatek,mt7986-pwm";
+ reg = <0 0x10048000 0 0x1000>;
+ #clock-cells = <1>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&infracfg CLK_INFRA_PWM_STA>,
+ <&infracfg CLK_INFRA_PWM1_CK>,
+ <&infracfg CLK_INFRA_PWM2_CK>;
+ clock-names = "top", "main", "pwm1", "pwm2";
+ status = "disabled";
+ };
+
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys_0",
"syscon";
@@ -240,20 +245,6 @@ crypto: crypto@10320000 {
status = "disabled";
};
- pwm: pwm@10048000 {
- compatible = "mediatek,mt7986-pwm";
- reg = <0 0x10048000 0 0x1000>;
- #clock-cells = <1>;
- #pwm-cells = <2>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen CLK_TOP_PWM_SEL>,
- <&infracfg CLK_INFRA_PWM_STA>,
- <&infracfg CLK_INFRA_PWM1_CK>,
- <&infracfg CLK_INFRA_PWM2_CK>;
- clock-names = "top", "main", "pwm1", "pwm2";
- status = "disabled";
- };
-
uart0: serial@11002000 {
compatible = "mediatek,mt7986-uart",
"mediatek,mt6577-uart";
@@ -337,6 +328,21 @@ spi1: spi@1100b000 {
status = "disabled";
};
+ thermal: thermal@1100c800 {
+ compatible = "mediatek,mt7986-thermal";
+ reg = <0 0x1100c800 0 0x800>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_THERM_CK>,
+ <&infracfg CLK_INFRA_ADC_26M_CK>,
+ <&infracfg CLK_INFRA_ADC_FRC_CK>;
+ clock-names = "therm", "auxadc", "adc_32k";
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ };
+
auxadc: adc@1100d000 {
compatible = "mediatek,mt7986-auxadc";
reg = <0 0x1100d000 0 0x1000>;
@@ -388,21 +394,6 @@ mmc0: mmc@11230000 {
status = "disabled";
};
- thermal: thermal@1100c800 {
- compatible = "mediatek,mt7986-thermal";
- reg = <0 0x1100c800 0 0x800>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg CLK_INFRA_THERM_CK>,
- <&infracfg CLK_INFRA_ADC_26M_CK>,
- <&infracfg CLK_INFRA_ADC_FRC_CK>;
- clock-names = "therm", "auxadc", "adc_32k";
- nvmem-cells = <&thermal_calibration>;
- nvmem-cell-names = "calibration-data";
- #thermal-sensor-cells = <1>;
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
- };
-
pcie: pcie@11280000 {
compatible = "mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
@@ -534,20 +525,6 @@ wed1: wed@15011000 {
mediatek,wo-ccif = <&wo_ccif1>;
};
- wo_ccif0: syscon@151a5000 {
- compatible = "mediatek,mt7986-wo-ccif", "syscon";
- reg = <0 0x151a5000 0 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- wo_ccif1: syscon@151ad000 {
- compatible = "mediatek,mt7986-wo-ccif", "syscon";
- reg = <0 0x151ad000 0 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
- };
-
eth: ethernet@15100000 {
compatible = "mediatek,mt7986-eth";
reg = <0 0x15100000 0 0x80000>;
@@ -590,6 +567,20 @@ eth: ethernet@15100000 {
status = "disabled";
};
+ wo_ccif0: syscon@151a5000 {
+ compatible = "mediatek,mt7986-wo-ccif", "syscon";
+ reg = <0 0x151a5000 0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ wo_ccif1: syscon@151ad000 {
+ compatible = "mediatek,mt7986-wo-ccif", "syscon";
+ reg = <0 0x151ad000 0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
wifi: wifi@18000000 {
compatible = "mediatek,mt7986-wmac";
reg = <0 0x18000000 0 0x1000000>,
@@ -647,4 +638,13 @@ cpu_trip_active_low: active-low {
};
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
};
--
2.35.3
prev parent reply other threads:[~2023-12-29 7:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-29 7:57 [PATCH 1/2] arm64: dts: mediatek: mt7986: reorder properties Rafał Miłecki
2023-12-29 7:57 ` Rafał Miłecki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231229075739.8328-2-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).