[PATCH 3/5] arm64: dts: ti: hummingboard-t: add descriptions for m.2 pci-e and usb-3

[Josua Mayer <josua@solid-run.com>]

HummingBoard-T features two M.2 connectors labeled "M1" and "M2".
The single SerDes lane of the SoC can be routed to either M1 pci-e
signals, or M2 usb-3 signals by a gpio-controlled mux.

Add dedicated dts for each configuration.
- k3-am642-hummingboard-t.dts enables neither configuration
- k3-am642-hummingboard-t-pcie.dts (new)
  configures serdes mux and pci-e controller for M1
- k3-am642-hummingboard-t-usb3.dts (new)
  configures serdes mux and usb-3 controller for M2

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 arch/arm64/boot/dts/ti/Makefile                    |  2 ++
 .../boot/dts/ti/k3-am642-hummingboard-t-pcie.dts   | 31 ++++++++++++++++++
 .../boot/dts/ti/k3-am642-hummingboard-t-usb3.dts   | 37 ++++++++++++++++++++++
 3 files changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 041c3b71155e..0e408555edf1 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
 # Boards with AM64x SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
new file mode 100644
index 000000000000..5ba0029fcfb9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with PCI-E.
+ *
+ */
+
+#include "k3-am642-hummingboard-t.dts"
+#include "k3-serdes.h"
+
+/ {
+	model = "SolidRun AM642 HummingBoard-T with PCI-E";
+};
+
+&pcie0_rc {
+	status = "okay";
+};
+
+&serdes0_link {
+	cdns,phy-type = <PHY_TYPE_PCIE>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes_mux {
+	idle-state = <1>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
new file mode 100644
index 000000000000..12b0fedcd2bc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with USB-3.1 Gen 1.
+ *
+ */
+
+#include "k3-am642-hummingboard-t.dts"
+#include "k3-serdes.h"
+
+/ {
+	model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1";
+};
+
+&serdes0_link {
+	cdns,phy-type = <PHY_TYPE_USB3>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes_mux {
+	idle-state = <0>;
+};
+
+&usbss0 {
+	/delete-property/ ti,usb2-only;
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	phys = <&serdes0_link>;
+	phy-names = "cdns3,usb3-phy";
+};

-- 
2.35.3