devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: krzysztof.kozlowski@linaro.org, bhelgaas@google.com,
	conor+dt@kernel.org, devicetree@vger.kernel.org,
	festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
	imx@lists.linux.dev, kernel@pengutronix.de,
	krzysztof.kozlowski+dt@linaro.org, kw@linux.com,
	l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, lpieralisi@kernel.org,
	robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v7 16/16] PCI: imx6: Add iMX95 Endpoint (EP) function support
Date: Sun, 7 Jan 2024 11:56:54 +0530	[thread overview]
Message-ID: <20240107062654.GO3416@thinkpad> (raw)
In-Reply-To: <20231227182727.1747435-17-Frank.Li@nxp.com>

On Wed, Dec 27, 2023 at 01:27:27PM -0500, Frank Li wrote:

Subject: PCI: imx6: Add iMX95 Endpoint (EP) support

> Add iMX95 EP function support and add 64bit address support. Internal bus

Remove 'function' as that refers to endpoint function.

> bridge for PCI support 64bit dma address in iMX95. So set call
> dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)).
> 

'Hence, call dma_set_mask_and_coherent() to set 64 bit DMA mask.'

> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> 
> Notes:
>     Change from v3 to v4
>     - change align to 4k for imx95
>     Change from v1 to v3
>     - new patches at v3
> 
>  drivers/pci/controller/dwc/pci-imx6.c | 45 +++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 6a58fd63a9dd2..00ec59867c17b 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -75,6 +75,7 @@ enum imx6_pcie_variants {
>  	IMX8MQ_EP,
>  	IMX8MM_EP,
>  	IMX8MP_EP,
> +	IMX95_EP,
>  };
>  
>  #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
> @@ -84,6 +85,7 @@ enum imx6_pcie_variants {
>  #define IMX6_PCIE_FLAG_HAS_APP_RESET		BIT(4)
>  #define IMX6_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
>  #define IMX6_PCIE_FLAG_HAS_SERDES		BIT(6)
> +#define IMX6_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
>  
>  #define imx6_check_flag(pci, val)     (pci->drvdata->flags & val)
>  
> @@ -620,6 +622,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
>  		break;
>  	case IMX7D:
>  	case IMX95:
> +	case IMX95_EP:
>  		break;
>  	case IMX8MM:
>  	case IMX8MM_EP:
> @@ -1063,6 +1066,23 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
>  	.align = SZ_64K,
>  };
>  
> +/*
> + * BAR#	| Default BAR enable	| Default BAR Type	| Default BAR Size	| BAR Sizing Scheme
> + * ================================================================================================
> + * BAR0	| Enable		| 64-bit		| 1 MB			| Programmable Size
> + * BAR1	| Disable		| 32-bit		| 64 KB			| Fixed Size
> + *	| (BAR0 is 64-bit)	| if BAR0 is 32-bit	|			| As Bar0 is 64bit

I couldn't understand above. And not aligned properly.

> + * BAR2	| Enable		| 32-bit		| 1 MB			| Programmable Size
> + * BAR3	| Enable		| 32-bit		| 64 KB			| Programmable Size
> + * BAR4	| Enable		| 32-bit		| 1M			| Programmable Size
> + * BAR5	| Enable		| 32-bit		| 64 KB			| Programmable Size
> + */
> +static const struct pci_epc_features imx95_pcie_epc_features = {
> +	.msi_capable = true,
> +	.bar_fixed_size[1] = SZ_64K,
> +	.align = SZ_4K,
> +};
> +
>  static const struct pci_epc_features*
>  imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
>  {
> @@ -1105,6 +1125,14 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
>  
>  	pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
>  
> +	/*

Use FIXME here.

- Mani

> +	 * db2 information should fetch from dtb file. dw_pcie_ep_init() can get dbi_base2 from
> +	 * "dbi2" if pci->dbi_base2 is NULL. All code related pcie_dbi2_offset should be removed
> +	 * after all dts added "dbi2" reg.
> +	 */
> +	if (imx6_pcie->drvdata->variant == IMX95_EP)
> +		pci->dbi_base2 = NULL;
> +
>  	ret = dw_pcie_ep_init(ep);
>  	if (ret) {
>  		dev_err(dev, "failed to initialize endpoint\n");
> @@ -1355,6 +1383,9 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  					     "unable to find iomuxc registers\n");
>  	}
>  
> +	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
> +		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
> +
>  	/* Grab PCIe PHY Tx Settings */
>  	if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
>  				 &imx6_pcie->tx_deemph_gen1))
> @@ -1557,6 +1588,19 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  		.epc_features = &imx8m_pcie_epc_features,
>  	},
> +	[IMX95_EP] = {
> +		.variant = IMX95_EP,
> +		.flags = IMX6_PCIE_FLAG_HAS_SERDES |
> +			 IMX6_PCIE_FLAG_SUPPORT_64BIT,
> +		.clk_names = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"},
> +		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
> +		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
> +		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
> +		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
> +		.init_phy = imx95_pcie_init_phy,
> +		.epc_features = &imx95_pcie_epc_features,
> +		.mode = DW_PCIE_EP_TYPE,
> +	},
>  };
>  
>  static const struct of_device_id imx6_pcie_of_match[] = {
> @@ -1571,6 +1615,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
>  	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
>  	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
>  	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
> +	{ .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
>  	{},
>  };
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2024-01-07  6:27 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-27 18:27 [PATCH v7 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2023-12-27 18:27 ` [PATCH v7 01/16] PCI: imx6: Simplify clock handling by using bulk_clk_*() function Frank Li
2024-01-02  8:47   ` Marco Felsch
2024-01-03 17:02     ` Frank Li
2024-01-04 10:07       ` Marco Felsch
2024-01-06 15:27   ` Manivannan Sadhasivam
2024-01-06 16:48     ` Frank Li
2024-01-07  3:02       ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 02/16] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY Frank Li
2024-01-06 15:33   ` Manivannan Sadhasivam
2024-01-06 16:50     ` Frank Li
2024-01-07  3:04       ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2023-12-27 18:27 ` [PATCH v7 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li
2024-01-07  3:15   ` Manivannan Sadhasivam
2024-01-07  4:47     ` Frank Li
2024-01-07  5:19       ` Manivannan Sadhasivam
2024-01-07  5:38         ` Frank Li
2024-01-07  6:29           ` Manivannan Sadhasivam
2024-01-09  3:49             ` Rob Herring
2024-01-09  3:49   ` Rob Herring
2023-12-27 18:27 ` [PATCH v7 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2024-01-07  3:22   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-01-07  3:24   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2024-01-07  5:16   ` Manivannan Sadhasivam
2024-01-07  5:32     ` Frank Li
2024-01-07  5:35       ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2024-01-07  5:33   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-01-07  5:34   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 10/16] dt-bindings: imx6q-pcie: restruct reg and reg-name Frank Li
2024-01-07  5:35   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-01-02 16:03   ` Rob Herring
2023-12-27 18:27 ` [PATCH v7 12/16] PCI: imx6: Add iMX95 PCIe support Frank Li
2024-01-07  5:51   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 13/16] PCI: imx6: Clean up get addr_space code Frank Li
2024-01-07  5:55   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-01-07  6:16   ` Manivannan Sadhasivam
2023-12-27 18:27 ` [PATCH v7 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-01-09  3:53   ` Rob Herring
2023-12-27 18:27 ` [PATCH v7 16/16] PCI: imx6: Add iMX95 Endpoint (EP) function support Frank Li
2024-01-07  6:26   ` Manivannan Sadhasivam [this message]
2024-01-08 17:39     ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240107062654.GO3416@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=Frank.Li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=hongxing.zhu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).