From: "Rafał Miłecki" <zajec5@gmail.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Daniel Golle" <daniel@makrotopia.org>,
"Hsin-Yi Wang" <hsinyi@chromium.org>,
"Nícolas F . R . A . Prado" <nfraprado@collabora.com>,
"jason-ch chen" <Jason-ch.Chen@mediatek.com>,
"Macpaul Lin" <macpaul.lin@mediatek.com>,
"Bernhard Rosenkränzer" <bero@baylibre.com>,
"Sean Wang" <sean.wang@mediatek.com>,
"Frank Wunderlich" <frank-w@public-files.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 2/3] arm64: dts: mediatek: Add initial MT7988A and BPI-R4
Date: Mon, 8 Jan 2024 09:52:27 +0100 [thread overview]
Message-ID: <20240108085228.4727-3-zajec5@gmail.com> (raw)
In-Reply-To: <20240108085228.4727-1-zajec5@gmail.com>
From: Rafał Miłecki <rafal@milecki.pl>
MT7988A (AKA MediaTek Filogic 880) is a quad-core ARM Cortex-A73
platform designed for Wi-Fi 7 devices (there is no wireless on SoC
though). The first public MT7988A device is Banana Pi BPI-R4.
Many SoC parts remain to be added (they need their own bindings or
depend on missing clocks). Those present block however are correct and
having base .dtsi will help testing & working on missing stuff.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Drop thermal zones & reserved memory from .dtsi (those don't belong
there and we also need thermal controller first). Fix compatible.
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 11 +++
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 97 +++++++++++++++++++
3 files changed, 109 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1e6f91731e92..0a189d5d8006 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
new file mode 100644
index 000000000000..efc4ad0b08b8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a.dtsi"
+
+/ {
+ compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+ model = "Banana Pi BPI-R4";
+ chassis-type = "embedded";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
new file mode 100644
index 000000000000..5a778188ac21
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt7988a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a73";
+ reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a73";
+ reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a73";
+ reg = <0x2>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a73";
+ reg = <0x3>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+ };
+
+ oscillator-40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "clkxtal";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a73-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x0c000000 0 0x40000>, /* GICD */
+ <0 0x0c080000 0 0x200000>, /* GICR */
+ <0 0x0c400000 0 0x2000>, /* GICC */
+ <0 0x0c410000 0 0x1000>, /* GICH */
+ <0 0x0c420000 0 0x2000>; /* GICV */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ watchdog@1001c000 {
+ compatible = "mediatek,mt7988-wdt";
+ reg = <0 0x1001c000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--
2.35.3
next prev parent reply other threads:[~2024-01-08 8:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 8:52 [PATCH V2 0/3] mt7988: initial DT changes Rafał Miłecki
2024-01-08 8:52 ` [PATCH V2 1/3] dt-bindings: arm64: mediatek: Add MT7988A and BPI-R4 Rafał Miłecki
2024-01-08 9:34 ` Krzysztof Kozlowski
2024-01-08 8:52 ` Rafał Miłecki [this message]
2024-01-08 8:52 ` [PATCH V2 3/3] arm64: dts: mediatek: mt7988: add clock controllers Rafał Miłecki
2024-01-08 12:21 ` Daniel Golle
2024-01-22 9:00 ` [PATCH V2 0/3] mt7988: initial DT changes Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240108085228.4727-3-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=Jason-ch.Chen@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bero@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=hsinyi@chromium.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).