Re: [DO NOT MERGE v6 19/37] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema

[Rob Herring <robh@kernel.org>]

On Tue, Jan 09, 2024 at 05:23:16PM +0900, Yoshinori Sato wrote:
> Renesas SH7751 external interrupt encoder json-schema.
> 
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>  .../renesas,sh7751-irl-ext.yaml               | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> new file mode 100644
> index 000000000000..541b582b94ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/renesas,sh7751-irl-ext.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas SH7751 external interrupt encoder with enable regs.
> +
> +maintainers:
> +  - Yoshinori Sato <ysato@users.sourceforge.jp>
> +
> +description:
> +  This is the generally used external interrupt encoder on SH7751 based boards.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: renesas,sh7751-irl-ext
> +
> +  reg: true

Must define how many entries and what they are if more than one.

> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  '#address-cells':
> +    const: 0
> +
> +  renesas,set-to-disable:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: Invert enable registers. Setting the bit to 0 enables interrupts.

Why is this a property? Does it change per board or instance? If not, it 
should be implied by compatible.

> +
> +  renesas,enable-bit:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    description: |
> +      IRQ enable register bit mapping
> +      1st word interrupt level
> +      2nd word bit index of enable register

Same question here.

If it remains, then you need:

items:
  items:
    - description: interrupt level (does that mean high/low?)
    - description: bit index of enable register

Plus any constraints on the values if possible.


> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - renesas,enable-bit
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    r2dintc: sh7751irl_encoder@a4000000 {

interrupt-controller@a4000000 {

> +        compatible = "renesas,sh7751-irl-ext";
> +        reg = <0xa4000000 0x02>;
> +        interrupt-controller;
> +        #address-cells = <0>;
> +        #size-cells = <0>;
> +        #interrupt-cells = <1>;
> +        renesas,enable-bit = <0 11>,            /* PCI INTD */
> +                             <1 9>,             /* CF IDE */
> +                             <2 8>,             /* CF CD */
> +                             <3 12>,            /* PCI INTC */
> +                             <4 10>,            /* SM501 */
> +                             <5 6>,             /* KEY */
> +                             <6 5>,             /* RTC ALARM */
> +                             <7 4>,             /* RTC T */
> +                             <8 7>,             /* SDCARD */
> +                             <9 14>,            /* PCI INTA */
> +                             <10 13>,           /* PCI INTB */
> +                             <11 0>,            /* EXT */
> +                             <12 15>;           /* TP */

Looks like 'interrupt level' is just the index of the values? Why not 
make this an array?

Rob