From: Conor Dooley <conor@kernel.org>
To: Dumitru Ceclan <mitrutzceclan@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Ceclan Dumitru <dumitru.ceclan@analog.com>
Subject: Re: [PATCH v2 1/4] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
Date: Wed, 10 Jan 2024 16:17:45 +0000 [thread overview]
Message-ID: <20240110-unfitting-squander-b1d71c185bb7@spud> (raw)
In-Reply-To: <20240110153757.5754-2-mitrutzceclan@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2414 bytes --]
On Wed, Jan 10, 2024 at 05:37:09PM +0200, Dumitru Ceclan wrote:
> ADRF5740 and HMC540S have a 4 bit parallel interface.
> Update ctr-gpios description and min/maxItems values depending on the
> matched compatible to correctly reflect the hardware properties.
>
> Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Seems like you need a Fixes: tag, since the original binding was wrong?
> ---
> .../bindings/iio/amplifiers/adi,hmc425a.yaml | 33 +++++++++++++++++--
> 1 file changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> index 67de9d4e3a1d..a434cb8ddcc9 100644
> --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> @@ -33,11 +33,38 @@ properties:
>
> ctrl-gpios:
> description:
> - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
> - connected to the control pins V1-V6.
> - minItems: 6
> + Must contain an array of GPIO specifiers, referring to the GPIO pins
> + connected to the control pins.
> + ADRF5740 - 4 GPIO connected to D2-D5
> + HMC540S - 4 GPIO connected to V1-V4
> + HMC425A - 6 GPIO connected to V1-V6
> + minItems: 1
> maxItems: 6
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: adi,hmc425a
> + then:
> + properties:
> + ctrl-gpios:
> + minItems: 6
> + maxItems: 6
This one should not be needed, it's already set by constraints on the
property above.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
> + - if:
> + properties:
> + compatible:
> + contains:
> + anyOf:
> + - const: adi,adrf5740
> + - const: adi,hmc540s
> + then:
> + properties:
> + ctrl-gpios:
> + minItems: 4
> + maxItems: 4
I'd say this should be an else, but that clearly would just be churn
since your next patch adds something with a different set of
constraints.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cheers,
Conor.
> +
> required:
> - compatible
> - ctrl-gpios
> --
> 2.42.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2024-01-10 16:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-10 15:37 [PATCH v2 0/4] Add support for LTC6373 Dumitru Ceclan
2024-01-10 15:37 ` [PATCH v2 1/4] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints Dumitru Ceclan
2024-01-10 16:17 ` Conor Dooley [this message]
2024-01-11 8:17 ` Ceclan Dumitru
2024-01-11 16:31 ` Conor Dooley
2024-01-11 16:33 ` Conor Dooley
2024-01-13 15:36 ` Jonathan Cameron
2024-01-10 15:37 ` [PATCH v2 2/4] dt-bindings: iio: hmc425a: add entry for LTC6373 Dumitru Ceclan
2024-01-10 16:18 ` Conor Dooley
2024-01-10 15:37 ` [PATCH v2 3/4] iio: amplifiers: hmc425a: move conversion logic Dumitru Ceclan
2024-01-13 15:35 ` Jonathan Cameron
2024-01-10 15:37 ` [PATCH v2 4/4] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier Dumitru Ceclan
2024-01-13 15:45 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240110-unfitting-squander-b1d71c185bb7@spud \
--to=conor@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dumitru.ceclan@analog.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mitrutzceclan@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).