[PATCH v2 14/15] arm64: dts: qcom: sm6115: drop pipe clock selection

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

Stop selecting UTMI clock as the USB3 PIPE clock. This setting is
incompatible with the USB host working in USB3 (SuperSpeed) mode.
While we are at it, also drop the default setting for the port speed.

Fixes: 9dd5f6dba729 ("arm64: dts: qcom: sm6115: Add USB SS qmp phy node")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
[DB: fixed commit message, dropped dr_mode setting]
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 4 ----
 arch/arm64/boot/dts/qcom/sm6115.dtsi     | 1 -
 2 files changed, 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 7c19f874fa71..52f31f3166c2 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -607,10 +607,6 @@ &usb {
 	status = "okay";
 };
 
-&usb_dwc3 {
-	maximum-speed = "super-speed";
-};
-
 &usb_hsphy {
 	vdd-supply = <&vreg_l4a_0p9>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 160e098f1075..76c429e8ebab 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1600,7 +1600,6 @@ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
-			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
 			usb_dwc3: usb@4e00000 {

-- 
2.39.2