Re: [PATCH v2 3/4] iio: amplifiers: hmc425a: move conversion logic

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 10 Jan 2024 17:37:11 +0200
Dumitru Ceclan <mitrutzceclan@gmail.com> wrote:

> Move gain-dB<->code conversion logic from read_raw and write_raw to
> hmc425a_gain_dB_to_code() and hmc425a_code_to_gain_dB().
> 
> Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
A couple of trivial formatting suggestions if you end up doing a v3.
If not I might make the tweaks whilst applying,

Jonathan

> ---
>  drivers/iio/amplifiers/hmc425a.c | 100 ++++++++++++++++++-------------
>  1 file changed, 57 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c
> index ed4d72922696..b5fd19403d15 100644
> --- a/drivers/iio/amplifiers/hmc425a.c
> +++ b/drivers/iio/amplifiers/hmc425a.c
> @@ -56,35 +56,70 @@ static int hmc425a_write(struct iio_dev *indio_dev, u32 value)
>  	return 0;
>  }
>  
> +static int hmc425a_gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *code)
> +{
> +	struct hmc425a_chip_info *inf = st->chip_info;
> +	int gain, temp;
> +
> +	if (val < 0)
> +		gain = (val * 1000) - (val2 / 1000);
> +	else
> +		gain = (val * 1000) + (val2 / 1000);
> +
> +	if (gain > inf->gain_max || gain < inf->gain_min)
> +		return -EINVAL;
> +
> +	switch (st->type) {
> +	case ID_HMC425A:
> +		*code = ~((abs(gain) / 500) & 0x3F);
> +		break;
> +	case ID_HMC540S:
> +		*code = ~((abs(gain) / 1000) & 0xF);
> +		break;
> +	case ID_ADRF5740:
> +		temp = (abs(gain) / 2000) & 0xF;
> +		*code = temp & BIT(3) ? temp | BIT(2) : temp;
> +		break;
> +	}
trivial preference for blank line here.

> +	return 0;
> +}
> +
> +static int hmc425a_code_to_gain_dB(struct hmc425a_state *st, int *val, int *val2)
> +{
> +	int code, gain;
> +
> +	code = st->gain;
> +	switch (st->type) {
> +	case ID_HMC425A:
> +		gain = ~code * -500;
> +		break;
> +	case ID_HMC540S:
> +		gain = ~code * -1000;
> +		break;
> +	case ID_ADRF5740:
> +		code = code & BIT(3) ? code & ~BIT(2) : code;
> +		gain = code * -2000;
> +		break;
> +	}
> +
> +	*val = gain / 1000;
> +	*val2 = (gain % 1000) * 1000;

As above. It's godo to have a blank line before a 'bare' return like this.

> +	return 0;
> +}
> +
>  static int hmc425a_read_raw(struct iio_dev *indio_dev,
>  			    struct iio_chan_spec const *chan, int *val,
>  			    int *val2, long m)
>  {
>  	struct hmc425a_state *st = iio_priv(indio_dev);
> -	int code, gain = 0;
>  	int ret;
>  
>  	mutex_lock(&st->lock);
>  	switch (m) {
>  	case IIO_CHAN_INFO_HARDWAREGAIN:
> -		code = st->gain;
> -
> -		switch (st->type) {
> -		case ID_HMC425A:
> -			gain = ~code * -500;
> -			break;
> -		case ID_HMC540S:
> -			gain = ~code * -1000;
> -			break;
> -		case ID_ADRF5740:
> -			code = code & BIT(3) ? code & ~BIT(2) : code;
> -			gain = code * -2000;
> +		ret = hmc425a_code_to_gain_dB(st, val, val2);
> +		if (ret)
>  			break;
> -		}
> -
> -		*val = gain / 1000;
> -		*val2 = (gain % 1000) * 1000;
> -
>  		ret = IIO_VAL_INT_PLUS_MICRO_DB;
>  		break;
>  	default:
> @@ -100,36 +135,15 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev,
>  			     int val2, long mask)
>  {
>  	struct hmc425a_state *st = iio_priv(indio_dev);
> -	struct hmc425a_chip_info *inf = st->chip_info;
> -	int code = 0, gain;
> -	int ret;
> -
> -	if (val < 0)
> -		gain = (val * 1000) - (val2 / 1000);
> -	else
> -		gain = (val * 1000) + (val2 / 1000);
> -
> -	if (gain > inf->gain_max || gain < inf->gain_min)
> -		return -EINVAL;
> -
> -	switch (st->type) {
> -	case ID_HMC425A:
> -		code = ~((abs(gain) / 500) & 0x3F);
> -		break;
> -	case ID_HMC540S:
> -		code = ~((abs(gain) / 1000) & 0xF);
> -		break;
> -	case ID_ADRF5740:
> -		code = (abs(gain) / 2000) & 0xF;
> -		code = code & BIT(3) ? code | BIT(2) : code;
> -		break;
> -	}
> +	int code = 0, ret;
>  
>  	mutex_lock(&st->lock);
>  	switch (mask) {
>  	case IIO_CHAN_INFO_HARDWAREGAIN:
> +		ret = hmc425a_gain_dB_to_code(st, val, val2, &code);
> +		if (ret)
> +			break;
>  		st->gain = code;
> -
>  		ret = hmc425a_write(indio_dev, st->gain);
>  		break;
>  	default: