devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
To: Yannick Fertre <yannick.fertre@foss.st.com>,
	Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>,
	Philippe Cornu <philippe.cornu@foss.st.com>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: <dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 6/6] arm64: dts: st: add display support on stm32mp257f-ev
Date: Mon, 15 Jan 2024 14:20:09 +0100	[thread overview]
Message-ID: <20240115132009.101718-7-raphael.gallais-pou@foss.st.com> (raw)
In-Reply-To: <20240115132009.101718-1-raphael.gallais-pou@foss.st.com>

This patch enables the following IPs on stm32mp257f-ev :
  * LTDC
  * LVDS
  * WSVGA LVDS panel (1024x600)
  * Panel backlight
  * Ilitek touchescreen

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 79 ++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 0ea8e69bfb3d..ca2da988d91c 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -29,6 +29,43 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
 
+	panel_lvds: panel-lvds {
+		compatible = "edt,etml0700z9ndha", "panel-lvds";
+		enable-gpios = <&gpiog 15 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_lvds_backlight>;
+		status = "okay";
+
+		width-mm = <156>;
+		height-mm = <92>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <54000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <150>;
+			hback-porch = <150>;
+			hsync-len = <21>;
+			vfront-porch = <24>;
+			vback-porch = <24>;
+			vsync-len = <21>;
+		};
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds_out0>;
+			};
+		};
+	};
+
+	panel_lvds_backlight: panel-lvds-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		default-on;
+		default-brightness-level = <0>;
+		status = "okay";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -63,6 +100,15 @@ &i2c2 {
 	i2c-scl-falling-time-ns = <13>;
 	clock-frequency = <400000>;
 	status = "okay";
+
+	ili2511: ili2511@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpioi>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpiog 14 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
 };
 
 &i2c8 {
@@ -75,6 +121,39 @@ &i2c8 {
 	status = "disabled";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint {
+			remote-endpoint = <&lvds_in>;
+		};
+	};
+};
+
+&lvds {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			lvds_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			lvds_out0: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-- 
2.25.1


      parent reply	other threads:[~2024-01-15 13:21 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-15 13:20 [PATCH v3 0/6] Introduce STM32 LVDS driver Raphael Gallais-Pou
2024-01-15 13:20 ` [PATCH v3 1/6] dt-bindings: display: add dt-bindings for STM32 LVDS device Raphael Gallais-Pou
2024-01-15 14:32   ` Rob Herring
2024-01-15 15:46   ` Rob Herring
2024-01-15 16:51     ` Raphael Gallais-Pou
2024-01-16  7:42       ` Krzysztof Kozlowski
2024-01-18 15:06         ` Raphael Gallais-Pou
2024-01-15 13:20 ` [PATCH v3 2/6] drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver Raphael Gallais-Pou
2024-01-15 13:20 ` [PATCH v3 3/6] drm/stm: ltdc: add lvds pixel clock Raphael Gallais-Pou
2024-01-15 13:20 ` [PATCH v3 4/6] arm64: dts: st: add ltdc support on stm32mp251 Raphael Gallais-Pou
2024-01-15 13:20 ` [PATCH v3 5/6] arm64: dts: st: add lvds support on stm32mp255 Raphael Gallais-Pou
2024-01-15 13:20 ` Raphael Gallais-Pou [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240115132009.101718-7-raphael.gallais-pou@foss.st.com \
    --to=raphael.gallais-pou@foss.st.com \
    --cc=airlied@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=philippe.cornu@foss.st.com \
    --cc=robh+dt@kernel.org \
    --cc=tzimmermann@suse.de \
    --cc=yannick.fertre@foss.st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).