[PATCH AUTOSEL 5.10 09/44] ARM: dts: imx7d: Fix coresight funnel ports

[PATCH AUTOSEL 5.10 09/44] ARM: dts: imx7d: Fix coresight funnel ports

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 0d4ac04fa7c3f6dc263dba6f575a2ec7a2d4eca8 ]

imx7d uses two ports for 'in-ports', so the syntax port@<num> has to
be used. imx7d has both port and port@1 nodes present, raising these
error:
funnel@30041000: in-ports: More than one condition true in oneOf schema
funnel@30041000: Unevaluated properties are not allowed
('in-ports' was unexpected)

Fix this by also using port@0 for imx7s as well.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7d.dtsi | 3 ---
 arch/arm/boot/dts/imx7s.dtsi | 6 +++++-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b0bcfa9094a3..8ad3e60fd7d1 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -209,9 +209,6 @@ pcie: pcie@33800000 {
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 03bde2fb9bb1..622c60bd8b75 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -173,7 +173,11 @@ funnel@30041000 {
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
-- 
2.43.0

[PATCH AUTOSEL 5.10 10/44] ARM: dts: imx7s: Fix lcdif compatible

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 5f55da4cc37051cda600ea870ce8cf29f1297715 ]

imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay
by using LCDC_AS_CTRL register. This registers used by overlay plane:
* LCDC_AS_CTRL
* LCDC_AS_BUF
* LCDC_AS_NEXT_BUF
are listed in i.MX7D RM as well.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7s.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 622c60bd8b75..31ccf65d159b 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -773,7 +773,7 @@ csi_from_csi_mux: endpoint {
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-- 
2.43.0

[PATCH AUTOSEL 5.10 11/44] ARM: dts: imx7s: Fix nand-controller #size-cells

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 4aadb841ed49bada1415c48c44d21f5b69e01299 ]

nand-controller.yaml bindings says #size-cells shall be set to 0.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@33002000:
 #size-cells:0:0: 0 was expected
  from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7s.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 31ccf65d159b..b4cab6a21437 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1235,7 +1235,7 @@ dma_apbh: dma-controller@33000000 {
 		gpmi: nand-controller@33002000{
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.43.0

[PATCH AUTOSEL 5.10 20/44] ARM: dts: rockchip: fix rk3036 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 27ded76ef0fcfcf939914532aae575cf23c221b4 ]

Fix hdmi ports node so that it matches the
rockchip,inno-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/9a2afac1-ed5c-382d-02b0-b2f5f1af3abb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036.dtsi | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 093567022386..5f47b638f532 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -336,12 +336,20 @@ hdmi: hdmi@20034000 {
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
-- 
2.43.0

[PATCH AUTOSEL 5.10 21/44] ARM: dts: imx25/27-eukrea: Fix RTC node name

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 68c711b882c262e36895547cddea2c2d56ce611d ]

Node names should be generic. Use 'rtc' as node name to fix
the following dt-schema warning:

imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
	from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 2 +-
 arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..4b83e2918b55 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
-- 
2.43.0

[PATCH AUTOSEL 5.10 22/44] ARM: dts: imx: Use flash@0,0 pattern

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 1e1d7cc478fb16816de09740e3c323c0c188d58f ]

Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern.

Change it to 'flash@0,0' to fix the following dt-schema warning:

imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
	from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx1-ads.dts                  | 2 +-
 arch/arm/boot/dts/imx1-apf9328.dts              | 2 +-
 arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi    | 2 +-
 arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -65,7 +65,7 @@ &weim {
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts
index 77b21aa7a146..27e72b07b517 100644
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/imx1-apf9328.dts
@@ -45,7 +45,7 @@ &weim {
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
index 4b83e2918b55..c7e923584878 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -90,7 +90,7 @@ &usbotg {
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index 3d10273177e9..a5fdc2fd4ce5 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -322,7 +322,7 @@ &usbotg {
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
-- 
2.43.0

[PATCH AUTOSEL 5.10 23/44] ARM: dts: imx27: Fix sram node

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 2fb7b2a2f06bb3f8321cf26c33e4e820c5b238b6 ]

Per sram.yaml, address-cells, size-cells and ranges are mandatory.

Pass them to fix the following dt-schema warnings:

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx27.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 7bc132737a37..8ae24c865521 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -588,6 +588,9 @@ weim: weim@d8002000 {
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
-- 
2.43.0

[PATCH AUTOSEL 5.10 24/44] ARM: dts: imx1: Fix sram node

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit c248e535973088ba7071ff6f26ab7951143450af ]

Per sram.yaml, address-cells, size-cells and ranges are mandatory.

The node name should be sram.

Change the node name and pass the required properties to fix the
following dt-schema warnings:

imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?'
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx1.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 9b940987864c..8d6e900a9081 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -268,9 +268,12 @@ weim: weim@220000 {
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
-- 
2.43.0

[PATCH AUTOSEL 5.10 27/44] ARM: dts: imx25: Fix the iim compatible string

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit f0b929f58719fc57a4926ab4fc972f185453d6a5 ]

Per imx-iim.yaml, the compatible string should only contain a single
entry.

Use it as "fsl,imx25-iim" to fix the following dt-schema warning:

imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long
	from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx25.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index d24b1da18766..99886ba36724 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -543,7 +543,7 @@ pwm1: pwm@53fe0000 {
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
-- 
2.43.0

[PATCH AUTOSEL 5.10 28/44] ARM: dts: imx25/27: Pass timing0

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 11ab7ad6f795ae23c398a4a5c56505d3dab27c4c ]

Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.

Change it accordingly to fix the following dt-schema warning:

imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 2 +-
 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts | 2 +-
 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts  | 2 +-
 arch/arm/boot/dts/imx25-pdk.dts                                 | 2 +-
 arch/arm/boot/dts/imx27-apf27dev.dts                            | 2 +-
 arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts          | 2 +-
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts                | 2 +-
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts                  | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index 7d4301b22b90..1ed3fb7b9ce6 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@ cmo_qvga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@ dvi_svga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@ dvi_vga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index fb66884d8a2f..59b40d13a640 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -78,7 +78,7 @@ wvga: display {
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 6f1e8ce9e76e..68fcb5ce9a9e 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -16,7 +16,7 @@ display: display {
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
index 9c3ec82ec7e5..50fa0bd4c8a1 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@ display0: CMO-QVGA {
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 188639738dc3..7f36af150a25 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@ display: display {
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 344e77790152..d133b9f08b3a 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@ display0: LQ035Q7 {
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
-- 
2.43.0

[PATCH AUTOSEL 5.10 29/44] ARM: dts: imx27-apf27dev: Fix LED name

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit dc35e253d032b959d92e12f081db5b00db26ae64 ]

Per leds-gpio.yaml, the led names should start with 'led'.

Change it to fix the following dt-schema warning:

imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx27-apf27dev.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 68fcb5ce9a9e..3d9bb7fc3be2 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -47,7 +47,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
-- 
2.43.0

[PATCH AUTOSEL 5.10 30/44] ARM: dts: imx23-sansa: Use preferred i2c-gpios properties

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit e3aa1a82fb20ee97597022f6528823a8ab82bde6 ]

The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.

Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.

This fixes the following schema warnings:

imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
	from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
	from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx23-sansa.dts | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
index 46057d9bf555..c2efcc20ae80 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -175,10 +175,8 @@ i2c-0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@ i2c-1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
-- 
2.43.0

[PATCH AUTOSEL 5.10 31/44] ARM: dts: imx23/28: Fix the DMA controller node name

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit 858d83ca4b50bbc8693d95cc94310e6d791fb2e6 ]

Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'.

Change it to fix the following dt-schema warning.

imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$'
	from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx23.dtsi | 2 +-
 arch/arm/boot/dts/imx28.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index ce3d6360a7ef..b236d23f8071 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -414,7 +414,7 @@ emi@80020000 {
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7 5 9 26
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 6cab8b66db80..23ef4a322995 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -982,7 +982,7 @@ etm: etm@80022000 {
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78 79 66 0
-- 
2.43.0

[PATCH AUTOSEL 5.10 35/44] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property

[Sasha Levin]

From: Mao Jinlong <quic_jinlmao@quicinc.com>

[ Upstream commit 9a6fc510a6a3ec150cb7450aec1e5f257e6fc77b ]

Add the inport of funnel@3023000 to fix 'in-ports' is a required property
warning.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-3-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0bc5fefb7a49..d766f3b5c03e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -139,6 +139,19 @@ memory {
 		reg = <0 0 0 0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1374,6 +1387,14 @@ funnel@3023000 {
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
-- 
2.43.0

[PATCH AUTOSEL 5.10 36/44] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property

[Sasha Levin]

From: Mao Jinlong <quic_jinlmao@quicinc.com>

[ Upstream commit ae5ee3562a2519214b12228545e88a203dd68bbd ]

out-ports is a required property for coresight ETM. Add out-ports for
ETM nodes to fix the warning.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 32 +++++++++++++++++----------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 7c8d69ca91cf..ca8e7848769a 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1577,9 +1577,11 @@ etm5: etm@7c40000 {
 
 			cpu = <&CPU4>;
 
-			port{
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port{
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -1594,9 +1596,11 @@ etm6: etm@7d40000 {
 
 			cpu = <&CPU5>;
 
-			port{
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port{
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -1611,9 +1615,11 @@ etm7: etm@7e40000 {
 
 			cpu = <&CPU6>;
 
-			port{
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port{
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -1628,9 +1634,11 @@ etm8: etm@7f40000 {
 
 			cpu = <&CPU7>;
 
-			port{
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port{
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
-- 
2.43.0