[PATCH 0/4] ARM: dts: qcom: msm8974: Add Samsung Galaxy S5 China support

[Rong Zhang <i@rong.moe>]

Samsung Galaxy S5 has some variants, currently, the only supported one
is klte. Samsung Galaxy S5 China (kltechn) is the China edition of
klte, and it has minor difference compared to klte. It can mostly work
with klte device tree, with only LEDs and WiFi not working.

This patchset adds support for kltechn by fixing up the GPIO pins for
the /i2c-gpio-led node (a corresponding label, "i2c_led_gpio", is also
added), and adding the brcm,board-type property in the wifi@1 node of
the klte device tree to allow loading the same firmware on all klte*
variants.

Rong Zhang (4):
  ARM: dts: qcom: msm8974-samsung-klte: Add label on /i2c-gpio-led
  ARM: dts: qcom: msm8974-samsung-klte: Pin brcm,board-type in wifi
  dt-bindings: arm: qcom: add Samsung Galaxy S5 China (kltechn)
  ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China

 Documentation/devicetree/bindings/arm/qcom.yaml  |  1 +
 arch/arm/boot/dts/qcom/Makefile                  |  1 +
 .../dts/qcom/qcom-msm8974pro-samsung-klte.dts    |  8 +++++++-
 .../dts/qcom/qcom-msm8974pro-samsung-kltechn.dts | 16 ++++++++++++++++
 4 files changed, 25 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts


base-commit: 7a396820222d6d4c02057f41658b162bdcdadd0e
-- 
2.43.0