From: Andre Przywara <andre.przywara@arm.com>
To: Chen-Yu Tsai <wens@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>, Vinod Koul <vkoul@kernel.org>,
Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-sound@vger.kernel.org,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
Date: Tue, 23 Jan 2024 00:39:20 +0000 [thread overview]
Message-ID: <20240123003920.08813e16@minigeek.lan> (raw)
In-Reply-To: <20240122170518.3090814-6-wens@kernel.org>
On Tue, 23 Jan 2024 01:05:16 +0800
Chen-Yu Tsai <wens@kernel.org> wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> The SPDIF hardware found on the H6 supports both transmit and receive
> functions. However it is missing the RX DMA channel.
>
> Add the SPDIF hardware block's RX DMA channel. Also remove the
> by-default pinmux, since the end device can choose to implement
> either or both functionalities.
>
> Fixes: f95b598df419 ("arm64: dts: allwinner: Add SPDIF node for Allwinner H6")
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Looks alright, just moving lines around, order of rx, tx DMA is correct:
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Cheers,
Andre
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 ++
> arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi | 2 ++
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 7 +++----
> 3 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> index 9ec49ac2f6fd..381d58cea092 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> @@ -291,6 +291,8 @@ sw {
> };
>
> &spdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spdif_tx_pin>;
> status = "okay";
> };
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
> index 4903d6358112..855b7d43bc50 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
> @@ -166,6 +166,8 @@ &r_ir {
> };
>
> &spdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spdif_tx_pin>;
> status = "okay";
> };
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index ca1d287a0a01..d11e5041bae9 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -406,6 +406,7 @@ spi1_cs_pin: spi1-cs-pin {
> function = "spi1";
> };
>
> + /omit-if-no-ref/
> spdif_tx_pin: spdif-tx-pin {
> pins = "PH7";
> function = "spdif";
> @@ -655,10 +656,8 @@ spdif: spdif@5093000 {
> clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
> clock-names = "apb", "spdif";
> resets = <&ccu RST_BUS_SPDIF>;
> - dmas = <&dma 2>;
> - dma-names = "tx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spdif_tx_pin>;
> + dmas = <&dma 2>, <&dma 2>;
> + dma-names = "rx", "tx";
> status = "disabled";
> };
>
next prev parent reply other threads:[~2024-01-23 0:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-22 17:05 [PATCH 0/7] arm64: sun50i-h616: Add DMA and SPDIF controllers Chen-Yu Tsai
2024-01-22 17:05 ` [PATCH 1/7] dt-bindings: sound: sun4i-spdif: Fix requirements for H6 Chen-Yu Tsai
2024-01-22 18:18 ` Conor Dooley
2024-01-23 17:48 ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 2/7] dt-bindings: sound: sun4i-spdif: Add Allwinner H616 compatible Chen-Yu Tsai
2024-01-22 18:19 ` Conor Dooley
2024-01-23 17:49 ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 3/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 Chen-Yu Tsai
2024-01-23 0:38 ` Andre Przywara
2024-01-23 17:50 ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 4/7] dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616 Chen-Yu Tsai
2024-01-22 18:18 ` Conor Dooley
2024-01-25 14:31 ` Chen-Yu Tsai
2024-01-23 0:40 ` Andre Przywara
2024-01-25 14:37 ` Chen-Yu Tsai
2024-01-25 15:09 ` Andre Przywara
2024-01-25 15:45 ` Chen-Yu Tsai
2024-01-22 17:05 ` [PATCH 5/7] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF Chen-Yu Tsai
2024-01-23 0:39 ` Andre Przywara [this message]
2024-01-23 17:52 ` Jernej Škrabec
2024-01-22 17:05 ` [PATCH 6/7] arm64: dts: allwinner: h616: Add DMA controller and DMA channels Chen-Yu Tsai
2024-01-23 0:41 ` Andre Przywara
2024-01-22 17:05 ` [PATCH 7/7] arm64: dts: allwinner: h616: Add SPDIF device node Chen-Yu Tsai
2024-01-23 0:43 ` Andre Przywara
2024-01-23 17:53 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240123003920.08813e16@minigeek.lan \
--to=andre.przywara@arm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=tiwai@suse.com \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).