From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, heiko@sntech.de,
conor+dt@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 1/4] arm64: dts: rockchip: Move device specific properties
Date: Tue, 23 Jan 2024 15:21:08 -0600 [thread overview]
Message-ID: <20240123212111.202146-2-macroalpha82@gmail.com> (raw)
In-Reply-To: <20240123212111.202146-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Move device specific properties related to the ADC Joystick to
different board specific device trees. This is in preparation for
adding the Anbernic RG-Arc series of devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../dts/rockchip/rk3566-anbernic-rg353x.dtsi | 74 +++++++++++++++++++
.../dts/rockchip/rk3566-anbernic-rg503.dts | 74 +++++++++++++++++++
.../dts/rockchip/rk3566-anbernic-rgxx3.dtsi | 74 -------------------
3 files changed, 148 insertions(+), 74 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
index 2a2821f4c580..63a18ff36cea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -8,11 +8,73 @@
#include "rk3566-anbernic-rgxx3.dtsi"
/ {
+ adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc_mux 0>,
+ <&adc_mux 1>,
+ <&adc_mux 2>,
+ <&adc_mux 3>;
+ pinctrl-0 = <&joy_mux_en>;
+ pinctrl-names = "default";
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ adc_mux: adc-mux {
+ compatible = "io-channel-mux";
+ channels = "left_x", "right_x", "left_y", "right_y";
+ #io-channel-cells = <1>;
+ io-channels = <&saradc 3>;
+ io-channel-names = "parent";
+ mux-controls = <&gpio_mux>;
+ settle-time-us = <100>;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_sys>;
pwms = <&pwm4 0 25000 0>;
};
+
+ gpio_mux: mux-controller {
+ compatible = "gpio-mux";
+ mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+ <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ #mux-control-cells = <0>;
+ };
};
&cru {
@@ -83,6 +145,18 @@ button-right {
linux,code = <BTN_DPAD_RIGHT>;
};
+ button-thumbl {
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
button-y {
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
label = "WEST";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
index c763c7f3b1b3..94e6dd61a2db 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -17,6 +17,61 @@ aliases {
mmc2 = &sdmmc2;
};
+ adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc_mux 0>,
+ <&adc_mux 1>,
+ <&adc_mux 2>,
+ <&adc_mux 3>;
+ pinctrl-0 = <&joy_mux_en>;
+ pinctrl-names = "default";
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ adc_mux: adc-mux {
+ compatible = "io-channel-mux";
+ channels = "left_x", "right_x", "left_y", "right_y";
+ #io-channel-cells = <1>;
+ io-channels = <&saradc 3>;
+ io-channel-names = "parent";
+ mux-controls = <&gpio_mux>;
+ settle-time-us = <100>;
+ };
+
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3472000>;
@@ -36,6 +91,13 @@ battery: battery {
<3400000 0>;
};
+ gpio_mux: mux-controller {
+ compatible = "gpio-mux";
+ mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+ <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ #mux-control-cells = <0>;
+ };
+
gpio_spi: spi {
compatible = "spi-gpio";
pinctrl-names = "default";
@@ -174,6 +236,18 @@ button-right {
linux,code = <BTN_DPAD_RIGHT>;
};
+ button-thumbl {
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
button-y {
gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
label = "WEST";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
index 8cbf3d9a4f22..18b8c2e7befa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -14,51 +14,6 @@ chosen: chosen {
stdout-path = "serial2:1500000n8";
};
- adc-joystick {
- compatible = "adc-joystick";
- io-channels = <&adc_mux 0>,
- <&adc_mux 1>,
- <&adc_mux 2>,
- <&adc_mux 3>;
- pinctrl-0 = <&joy_mux_en>;
- pinctrl-names = "default";
- poll-interval = <60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis@0 {
- reg = <0>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <1023 15>;
- linux,code = <ABS_X>;
- };
-
- axis@1 {
- reg = <1>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <15 1023>;
- linux,code = <ABS_RX>;
- };
-
- axis@2 {
- reg = <2>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <15 1023>;
- linux,code = <ABS_Y>;
- };
-
- axis@3 {
- reg = <3>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <1023 15>;
- linux,code = <ABS_RY>;
- };
- };
-
adc_keys: adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
@@ -77,16 +32,6 @@ button-mode {
};
};
- adc_mux: adc-mux {
- compatible = "io-channel-mux";
- channels = "left_x", "right_x", "left_y", "right_y";
- #io-channel-cells = <1>;
- io-channels = <&saradc 3>;
- io-channel-names = "parent";
- mux-controls = <&gpio_mux>;
- settle-time-us = <100>;
- };
-
gpio_keys_control: gpio-keys-control {
compatible = "gpio-keys";
pinctrl-0 = <&btn_pins_ctrl>;
@@ -128,18 +73,6 @@ button-start {
linux,code = <BTN_START>;
};
- button-thumbl {
- gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
- label = "THUMBL";
- linux,code = <BTN_THUMBL>;
- };
-
- button-thumbr {
- gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "THUMBR";
- linux,code = <BTN_THUMBR>;
- };
-
button-up {
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
@@ -172,13 +105,6 @@ button-vol-up {
};
};
- gpio_mux: mux-controller {
- compatible = "gpio-mux";
- mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
- <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
- #mux-control-cells = <0>;
- };
-
hdmi-con {
compatible = "hdmi-connector";
ddc-i2c-bus = <&i2c5>;
--
2.34.1
next prev parent reply other threads:[~2024-01-23 21:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-23 21:21 [PATCH 0/4] Add Support for RK3566 Anbernic RG-ARC Chris Morgan
2024-01-23 21:21 ` Chris Morgan [this message]
2024-01-23 21:21 ` [PATCH 2/4] dt-bindings: arm: rockchip: Add Anbernic RG-Arc Chris Morgan
2024-01-24 6:41 ` Krzysztof Kozlowski
2024-01-23 21:21 ` [PATCH 3/4] clk: rockchip: rk3568: Add PLL rate for 128MHz Chris Morgan
2024-01-23 21:21 ` [PATCH 4/4] arm64: dts: rockchip: add Anbernic RG-ARC S and RG-ARC D Chris Morgan
2024-01-25 21:12 ` [PATCH 0/4] Add Support for RK3566 Anbernic RG-ARC Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240123212111.202146-2-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).