Re: [PATCH v2 4/8] dt-bindings: power: reset: add bindings for NVMEM hardware storing PSCR Data

[Oleksij Rempel <o.rempel@pengutronix.de>]

On Thu, Jan 25, 2024 at 11:57:18AM +0100, Krzysztof Kozlowski wrote:
> On 24/01/2024 13:22, Oleksij Rempel wrote:
> > Add device tree bindings that describe hardware implementations of
> > Non-Volatile Memory (NVMEM) used for storing Power State Change Reasons
> > (PSCR).
> > +  that stores Power State Change Reasons (PSCR).
> > +
> > +allOf:
> > +  - $ref: pscrr.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: pscrr-nvmem
> > +
> 
> So that's a driver :/. Maybe Rob will like it, but it's a no from me.
> Please come up with something really suiting DEVICES, not DRIVERS.

If I understand your distinction between 'DEVICES' and 'DRIVERS'
correctly, 'DEVICES' in the device tree context are meant to represent
physical hardware components, while 'DRIVERS' refer to software
abstractions of these components. However, there are numerous device
tree instances, like software-based implementations for SPI, I2C, or
GPIO, which could also be interpreted as 'DRIVERS' in the context of
your email. Similarly, the binding for PSCRR represents functionality not
fully implemented in hardware but supported by the hardware component of
NVMEM, akin to how ramoops or other functionalities are represented.

If I'm misunderstanding your distinction between 'DEVICES' and
'DRIVERS', please clarify with an example of how a proper binding should
be implemented for a case like this.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |