[PATCH 3/5] arm64: dts: exynos: gs101: use correct clocks for usi8

["André Draszik" <andre.draszik@linaro.org>]

Wrong pclk clocks have been used in this usi8 instance here. For USI
and I2C, we need the ipclk and pclk, where pclk is the bus clock.
Without it, nothing can work.
It is unclear what exactly is using USI8_USI_CLK, but it is not
required for the IP to be operational at this stage, while pclk is.
This also brings the DT in line with the clock names expected by the
usi and i2c drivers.

Update the DTSI accordingly.

Fixes: 6d44d1a1fb62 ("arm64: dts: exynos: gs101: define USI8 with I2C configuration")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index bc251e565be6..e5b665be2d62 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -380,7 +380,7 @@ usi8: usi@109700c0 {
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>,
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
 				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x101c>;
@@ -397,7 +397,7 @@ hsi2c_8: i2c@10970000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hsi2c8_bus>;
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
-					 <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>;
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
 				clock-names = "hsi2c", "hsi2c_pclk";
 				status = "disabled";
 			};
-- 
2.43.0.429.g432eaa2c6b-goog