devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: "Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	"Philipp Zabel" <p.zabel@pengutronix.de>
Cc: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	linux-mips@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	linux-gpio@vger.kernel.org,
	"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v4 01/18] clk: fixed-factor: add optional accuracy support
Date: Wed, 31 Jan 2024 17:26:14 +0100	[thread overview]
Message-ID: <20240131-mbly-clk-v4-1-bcd00510d6a0@bootlin.com> (raw)
In-Reply-To: <20240131-mbly-clk-v4-0-bcd00510d6a0@bootlin.com>

Fixed factor clock reports the parent clock accuracy. Add flags and acc
fields to `struct clk_fixed_factor` to support setting a fixed
accuracy. The default if no flag is set is not changed: use the parent
clock accuracy.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/clk/clk-fixed-factor.c | 28 +++++++++++++++++++++-------
 include/linux/clk-provider.h   | 12 +++++++++++-
 2 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index b3e66202b942..bc2644a9bd7d 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -57,10 +57,22 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
+static unsigned long clk_factor_recalc_accuracy(struct clk_hw *hw,
+						unsigned long parent_accuracy)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	if (fix->flags & CLK_FIXED_FACTOR_FIXED_ACCURACY)
+		return fix->acc;
+
+	return parent_accuracy;
+}
+
 const struct clk_ops clk_fixed_factor_ops = {
 	.round_rate = clk_factor_round_rate,
 	.set_rate = clk_factor_set_rate,
 	.recalc_rate = clk_factor_recalc_rate,
+	.recalc_accuracy = clk_factor_recalc_accuracy,
 };
 EXPORT_SYMBOL_GPL(clk_fixed_factor_ops);
 
@@ -81,7 +93,7 @@ __clk_hw_register_fixed_factor(struct device *dev, struct device_node *np,
 		const char *name, const char *parent_name,
 		const struct clk_hw *parent_hw, int index,
 		unsigned long flags, unsigned int mult, unsigned int div,
-		bool devm)
+		unsigned long acc, unsigned int fixflags, bool devm)
 {
 	struct clk_fixed_factor *fix;
 	struct clk_init_data init = { };
@@ -105,6 +117,8 @@ __clk_hw_register_fixed_factor(struct device *dev, struct device_node *np,
 	fix->mult = mult;
 	fix->div = div;
 	fix->hw.init = &init;
+	fix->acc = acc;
+	fix->flags = fixflags;
 
 	init.name = name;
 	init.ops = &clk_fixed_factor_ops;
@@ -152,7 +166,7 @@ struct clk_hw *devm_clk_hw_register_fixed_factor_index(struct device *dev,
 		unsigned int mult, unsigned int div)
 {
 	return __clk_hw_register_fixed_factor(dev, NULL, name, NULL, NULL, index,
-					      flags, mult, div, true);
+					      flags, mult, div, 0, 0, true);
 }
 EXPORT_SYMBOL_GPL(devm_clk_hw_register_fixed_factor_index);
 
@@ -174,7 +188,7 @@ struct clk_hw *devm_clk_hw_register_fixed_factor_parent_hw(struct device *dev,
 		unsigned long flags, unsigned int mult, unsigned int div)
 {
 	return __clk_hw_register_fixed_factor(dev, NULL, name, NULL, parent_hw,
-					      -1, flags, mult, div, true);
+					      -1, flags, mult, div, 0, 0, true);
 }
 EXPORT_SYMBOL_GPL(devm_clk_hw_register_fixed_factor_parent_hw);
 
@@ -184,7 +198,7 @@ struct clk_hw *clk_hw_register_fixed_factor_parent_hw(struct device *dev,
 {
 	return __clk_hw_register_fixed_factor(dev, NULL, name, NULL,
 					      parent_hw, -1, flags, mult, div,
-					      false);
+					      0, 0, false);
 }
 EXPORT_SYMBOL_GPL(clk_hw_register_fixed_factor_parent_hw);
 
@@ -193,7 +207,7 @@ struct clk_hw *clk_hw_register_fixed_factor(struct device *dev,
 		unsigned int mult, unsigned int div)
 {
 	return __clk_hw_register_fixed_factor(dev, NULL, name, parent_name, NULL, -1,
-					      flags, mult, div, false);
+					      flags, mult, div, 0, 0, false);
 }
 EXPORT_SYMBOL_GPL(clk_hw_register_fixed_factor);
 
@@ -240,7 +254,7 @@ struct clk_hw *devm_clk_hw_register_fixed_factor(struct device *dev,
 		unsigned int mult, unsigned int div)
 {
 	return __clk_hw_register_fixed_factor(dev, NULL, name, parent_name, NULL, -1,
-			flags, mult, div, true);
+			flags, mult, div, 0, 0, true);
 }
 EXPORT_SYMBOL_GPL(devm_clk_hw_register_fixed_factor);
 
@@ -267,7 +281,7 @@ static struct clk_hw *_of_fixed_factor_clk_setup(struct device_node *node)
 	of_property_read_string(node, "clock-output-names", &clk_name);
 
 	hw = __clk_hw_register_fixed_factor(NULL, node, clk_name, NULL, NULL, 0,
-					    0, mult, div, false);
+					    0, mult, div, 0, 0, false);
 	if (IS_ERR(hw)) {
 		/*
 		 * Clear OF_POPULATED flag so that clock registration can be
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 1293c38ddb7f..7ddc952c8c67 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -1084,18 +1084,28 @@ void of_fixed_factor_clk_setup(struct device_node *node);
  * @hw:		handle between common and hardware-specific interfaces
  * @mult:	multiplier
  * @div:	divider
+ * @acc:	fixed accuracy in ppb
+ * @flags:	behavior modifying flags
  *
  * Clock with a fixed multiplier and divider. The output frequency is the
  * parent clock rate divided by div and multiplied by mult.
- * Implements .recalc_rate, .set_rate and .round_rate
+ * Implements .recalc_rate, .set_rate, .round_rate and .recalc_accuracy
+ *
+ * Flags:
+ * * CLK_FIXED_FACTOR_FIXED_ACCURACY - Use the value in @acc instead of the
+ *                                     parent clk accuracy.
  */
 
 struct clk_fixed_factor {
 	struct clk_hw	hw;
 	unsigned int	mult;
 	unsigned int	div;
+	unsigned long	acc;
+	unsigned int	flags;
 };
 
+#define CLK_FIXED_FACTOR_FIXED_ACCURACY	BIT(0)
+
 #define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
 
 extern const struct clk_ops clk_fixed_factor_ops;

-- 
2.43.0


  reply	other threads:[~2024-01-31 16:27 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31 16:26 [PATCH v4 00/18] Add support for Mobileye EyeQ5 system controller Théo Lebrun
2024-01-31 16:26 ` Théo Lebrun [this message]
2024-01-31 16:26 ` [PATCH v4 02/18] clk: fixed-factor: add fwname-based constructor functions Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 03/18] dt-bindings: pinctrl: allow pin controller device without unit address Théo Lebrun
2024-02-02 19:52   ` Rob Herring
2024-01-31 16:26 ` [PATCH v4 04/18] dt-bindings: clock: mobileye,eyeq5-clk: add bindings Théo Lebrun
2024-02-01  8:58   ` Krzysztof Kozlowski
2024-02-01 10:38     ` Théo Lebrun
2024-02-01 11:00       ` Krzysztof Kozlowski
2024-02-06 10:13         ` Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 05/18] dt-bindings: reset: mobileye,eyeq5-reset: " Théo Lebrun
2024-02-01  9:00   ` Krzysztof Kozlowski
2024-01-31 16:26 ` [PATCH v4 06/18] dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: " Théo Lebrun
2024-02-05 17:19   ` Rob Herring
2024-01-31 16:26 ` [PATCH v4 07/18] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller Théo Lebrun
2024-02-01  9:36   ` Krzysztof Kozlowski
2024-02-01 10:45     ` Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 08/18] clk: eyeq5: add platform driver, and init routine at of_clk_init() Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 09/18] reset: eyeq5: add platform driver Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 10/18] pinctrl: " Théo Lebrun
2024-01-31 20:55   ` Linus Walleij
2024-02-01 10:23     ` Théo Lebrun
2024-02-01 16:47       ` Linus Walleij
2024-01-31 16:26 ` [PATCH v4 11/18] MIPS: mobileye: eyeq5: rename olb@e00000 to system-controller@e00000 Théo Lebrun
2024-02-01  9:10   ` Krzysztof Kozlowski
2024-02-01  9:12     ` Krzysztof Kozlowski
2024-01-31 16:26 ` [PATCH v4 12/18] MIPS: mobileye: eyeq5: remove reg-io-width property from OLB syscon Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 13/18] MIPS: mobileye: eyeq5: add memory translation inside " Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 14/18] MIPS: mobileye: eyeq5: use OLB clocks controller Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 15/18] MIPS: mobileye: eyeq5: add OLB reset controller node Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 16/18] MIPS: mobileye: eyeq5: add reset properties to UARTs Théo Lebrun
2024-02-01  9:13   ` Krzysztof Kozlowski
2024-02-01 10:32     ` Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 17/18] MIPS: mobileye: eyeq5: add pinctrl nodes & pinmux function nodes Théo Lebrun
2024-01-31 16:26 ` [PATCH v4 18/18] MIPS: mobileye: eyeq5: add pinctrl properties to UART nodes Théo Lebrun
2024-01-31 20:44 ` [PATCH v4 00/18] Add support for Mobileye EyeQ5 system controller Linus Walleij
2024-02-01 10:30   ` Théo Lebrun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240131-mbly-clk-v4-1-bcd00510d6a0@bootlin.com \
    --to=theo.lebrun@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafal@milecki.pl \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).