From: Bjorn Helgaas <helgaas@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
imx@lists.linux.dev, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
"Serge Semin" <fancer.lancer@gmail.com>
Subject: Re: [PATCH 1/6] PCI: Add INTx Mechanism Messages macros
Date: Wed, 31 Jan 2024 09:37:48 -0600 [thread overview]
Message-ID: <20240131153748.GA586693@bhelgaas> (raw)
In-Reply-To: <20240130-pme_msg-v1-1-d52b0add5c7c@nxp.com>
On Tue, Jan 30, 2024 at 07:45:26PM -0500, Frank Li wrote:
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>
> Add "Message Routing" and "INTx Mechanism Messages" macros to enable
> a PCIe driver to send messages for INTx Interrupt Signaling.
>
> The "Message Routing" is from Table 2-17, and the "INTx Mechanism
> Messages" is from Table 2-18 on the PCI Express Base Specification,
> Rev. 4.0 Version 1.0.
Please cite a newer spec revision, e.g., PCIe r6.0 or r6.1.
Also, please cite section numbers instead of table numbers because the
table numbers are hard to find (you can't navigate to them from
"Contents") and they change a lot between spec revisions. "INTx
Mechanism Messages" is Table 2-21 in r6.0, but it's in sec 2.2.8.1 in
both r4.0 and r6.0.
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
With these updates:
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/pci.h | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 2336a8d1edab2..fe42f5d10b010 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -22,6 +22,24 @@
> */
> #define PCIE_PME_TO_L2_TIMEOUT_US 10000
>
> +/* Message Routing (r[2:0]) */
Add citation to the comment: "PCIe r6.0, sec 2.2.8"
> +#define PCI_MSG_TYPE_R_RC 0
I think I would prefix all these with "PCIE" instead of "PCI", since
they are specific to PCIe and we already use "PCIE" for some of the
PCIe-specific timeouts.
> +#define PCI_MSG_TYPE_R_ADDR 1
> +#define PCI_MSG_TYPE_R_ID 2
> +#define PCI_MSG_TYPE_R_BC 3
> +#define PCI_MSG_TYPE_R_LOCAL 4
> +#define PCI_MSG_TYPE_R_GATHER 5
> +
> +/* INTx Mechanism Messages */
Add "PCIe r6.0, sec 2.2.8.1"
> +#define PCI_MSG_CODE_ASSERT_INTA 0x20
> +#define PCI_MSG_CODE_ASSERT_INTB 0x21
> +#define PCI_MSG_CODE_ASSERT_INTC 0x22
> +#define PCI_MSG_CODE_ASSERT_INTD 0x23
> +#define PCI_MSG_CODE_DEASSERT_INTA 0x24
> +#define PCI_MSG_CODE_DEASSERT_INTB 0x25
> +#define PCI_MSG_CODE_DEASSERT_INTC 0x26
> +#define PCI_MSG_CODE_DEASSERT_INTD 0x27
> +
> extern const unsigned char pcie_link_speed[];
> extern bool pci_early_dump;
>
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-01-31 15:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 0:45 [PATCH 0/6] PCI: dwc: Add common pme_turn_off message by using outbound iATU Frank Li
2024-01-31 0:45 ` [PATCH 1/6] PCI: Add INTx Mechanism Messages macros Frank Li
2024-01-31 15:37 ` Bjorn Helgaas [this message]
2024-02-01 17:53 ` Bjorn Helgaas
2024-01-31 0:45 ` [PATCH 2/6] PCI: dwc: Change arguments of dw_pcie_prog_outbound_atu() Frank Li
2024-01-31 15:41 ` Bjorn Helgaas
2024-01-31 15:56 ` Frank Li
2024-01-31 18:23 ` Bjorn Helgaas
2024-01-31 0:45 ` [PATCH 3/6] PCI: dwc: Add outbound MSG TLPs support Frank Li
2024-02-01 3:07 ` Yoshihiro Shimoda
2024-02-01 4:18 ` Frank Li
2024-01-31 0:45 ` [PATCH 4/6] PCI: Add PME_TURN_OFF message macro Frank Li
2024-01-31 0:45 ` [PATCH 5/6] dt-bindings: PCI: dwc: Add 'msg" register region Frank Li
2024-01-31 16:01 ` Bjorn Helgaas
2024-01-31 0:45 ` [PATCH 6/6] PCI: dwc: Add common send pme_turn_off message method Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240131153748.GA586693@bhelgaas \
--to=helgaas@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=imx@lists.linux.dev \
--cc=jingoohan1@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).