Re: [PATCH v3] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Wed, 31 Jan 2024 09:29:59 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 30/01/2024 12:56, Naresh Solanki wrote:
> > voltage-divider is always an iio consumer at the same time it is
> > optionally an iio provider.
> > Hence add #io-channel-cells
> > Also update example.
> >   
> 
> Fix
> wrapping
> and
> proper
> sentences. Each sentence finishes with full stop.
> 
> ...
> >    output-ohms:
> >      description:
> >        Resistance Rout over which the output voltage is measured. See full-ohms.
> > @@ -75,12 +82,17 @@ examples:
> >              spi-max-frequency = <1000000>;
> >          };
> >      };
> > -    sysv {
> > +    p12v_vd: sysv {  
> 
> No, drop label.
> 
> >          compatible = "voltage-divider";
> >          io-channels = <&maxadc 1>;
> > +        #io-channel-cells = <1>;
> >  
> >          /* Scale the system voltage by 22/222 to fit the ADC range. */
> >          output-ohms = <22>;
> >          full-ohms = <222>; /* 200 + 22 */
> >      };
> > +    iio-hwmon {
> > +        compatible = "iio-hwmon";
> > +        io-channels = <&p12v_vd 0>;  
> 
> The same question as for v2. Drop unrelated example.

Conor requested an example of the device acting as a consumer and a provider.
Might have meant in the patch description?

Conor?
> 
> Also, remember about rule of posting only one version per day, so people
> actually have some chance to look at your patch.
> 
> Best regards,
> Krzysztof
> 
>