From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: marex@denx.de, alexander.stein@ew.tq-group.com,
frieder.schrempf@kontron.de, Lucas Stach <l.stach@pengutronix.de>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Adam Ford <aford173@gmail.com>,
Richard Leitner <richard.leitner@skidata.com>,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Liu Ying <victor.liu@nxp.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI
Date: Sat, 3 Feb 2024 10:52:50 -0600 [thread overview]
Message-ID: <20240203165307.7806-11-aford173@gmail.com> (raw)
In-Reply-To: <20240203165307.7806-1-aford173@gmail.com>
From: Lucas Stach <l.stach@pengutronix.de>
Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
---
v3: To move this along, I (Adam) took Lucas' V2 and attempted
to address concerns:
Changed name to imx8mp-hdmi-tx
Re-ordered includes to make drm come after linux
Removed unused variable build warning
Removed fdcc clock since it's part of the power domain now
set the phy_force_vendor = true
Removed comma after sentinel
Also added suspend/resume functions from Marek Vasut
Configured Kconfig to select the PVI and PHY automatically
since the HDMI-tx is useless without the other two components
I apologize that don't have the version history prior to V2.
---
drivers/gpu/drm/bridge/imx/Kconfig | 11 ++
drivers/gpu/drm/bridge/imx/Makefile | 1 +
drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 154 ++++++++++++++++++++
3 files changed, 166 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index a4d13331e320..5965e8027529 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -3,6 +3,17 @@ if ARCH_MXC || COMPILE_TEST
config DRM_IMX_LDB_HELPER
tristate
+config DRM_IMX8MP_DW_HDMI_BRIDGE
+ tristate "Freescale i.MX8MP HDMI-TX bridge support"
+ depends on OF
+ depends on COMMON_CLK
+ select DRM_DW_HDMI
+ select DRM_IMX8MP_HDMI_PVI
+ select PHY_FSL_SAMSUNG_HDMI_PHY
+ help
+ Choose this to enable support for the internal HDMI encoder found
+ on the i.MX8MP SoC.
+
config DRM_IMX8MP_HDMI_PVI
tristate "Freescale i.MX8MP HDMI PVI bridge support"
depends on OF
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index e2c2106509fa..edb0a7b71b30 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_DRM_IMX_LDB_HELPER) += imx-ldb-helper.o
+obj-$(CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE) += imx8mp-hdmi-tx.o
obj-$(CONFIG_DRM_IMX8MP_HDMI_PVI) += imx8mp-hdmi-pvi.o
obj-$(CONFIG_DRM_IMX8QM_LDB) += imx8qm-ldb.o
obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
new file mode 100644
index 000000000000..89fc432ac611
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_modes.h>
+
+struct imx8mp_hdmi {
+ struct dw_hdmi_plat_data plat_data;
+ struct dw_hdmi *dw_hdmi;
+ struct clk *pixclk;
+};
+
+static enum drm_mode_status
+imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data;
+
+ if (mode->clock < 13500)
+ return MODE_CLOCK_LOW;
+
+ if (mode->clock > 297000)
+ return MODE_CLOCK_HIGH;
+
+ if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) !=
+ mode->clock * 1000)
+ return MODE_CLOCK_RANGE;
+
+ /* We don't support double-clocked and Interlaced modes */
+ if ((mode->flags & DRM_MODE_FLAG_DBLCLK) ||
+ (mode->flags & DRM_MODE_FLAG_INTERLACE))
+ return MODE_BAD;
+
+ return MODE_OK;
+}
+
+static int imx8mp_hdmi_phy_init(struct dw_hdmi *dw_hdmi, void *data,
+ const struct drm_display_info *display,
+ const struct drm_display_mode *mode)
+{
+ return 0;
+}
+
+static void imx8mp_hdmi_phy_disable(struct dw_hdmi *dw_hdmi, void *data)
+{
+}
+
+static void im8mp_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
+{
+ /*
+ * Just release PHY core from reset, all other power management is done
+ * by the PHY driver.
+ */
+ dw_hdmi_phy_gen1_reset(hdmi);
+
+ dw_hdmi_phy_setup_hpd(hdmi, data);
+}
+
+static const struct dw_hdmi_phy_ops imx8mp_hdmi_phy_ops = {
+ .init = imx8mp_hdmi_phy_init,
+ .disable = imx8mp_hdmi_phy_disable,
+ .setup_hpd = im8mp_hdmi_phy_setup_hpd,
+ .read_hpd = dw_hdmi_phy_read_hpd,
+ .update_hpd = dw_hdmi_phy_update_hpd,
+};
+
+static int imx8mp_dw_hdmi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dw_hdmi_plat_data *plat_data;
+ struct imx8mp_hdmi *hdmi;
+
+ hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ plat_data = &hdmi->plat_data;
+
+ hdmi->pixclk = devm_clk_get(dev, "pix");
+ if (IS_ERR(hdmi->pixclk))
+ return dev_err_probe(dev, PTR_ERR(hdmi->pixclk),
+ "Unable to get pixel clock\n");
+
+ plat_data->mode_valid = imx8mp_hdmi_mode_valid;
+ plat_data->phy_ops = &imx8mp_hdmi_phy_ops;
+ plat_data->phy_name = "SAMSUNG HDMI TX PHY";
+ plat_data->priv_data = hdmi;
+ plat_data->phy_force_vendor = true;
+
+ hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
+ if (IS_ERR(hdmi->dw_hdmi))
+ return PTR_ERR(hdmi->dw_hdmi);
+
+ platform_set_drvdata(pdev, hdmi);
+
+ return 0;
+}
+
+static int imx8mp_dw_hdmi_remove(struct platform_device *pdev)
+{
+ struct imx8mp_hdmi *hdmi = platform_get_drvdata(pdev);
+
+ dw_hdmi_remove(hdmi->dw_hdmi);
+
+ return 0;
+}
+
+static int __maybe_unused imx8mp_dw_hdmi_pm_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int __maybe_unused imx8mp_dw_hdmi_pm_resume(struct device *dev)
+{
+ struct imx8mp_hdmi *hdmi = dev_get_drvdata(dev);
+
+ dw_hdmi_resume(hdmi->dw_hdmi);
+
+ return 0;
+}
+
+static const struct dev_pm_ops imx8mp_dw_hdmi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx8mp_dw_hdmi_pm_suspend,
+ imx8mp_dw_hdmi_pm_resume)
+};
+
+static const struct of_device_id imx8mp_dw_hdmi_of_table[] = {
+ { .compatible = "fsl,imx8mp-hdmi-tx" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx8mp_dw_hdmi_of_table);
+
+static struct platform_driver imx8mp_dw_hdmi_platform_driver = {
+ .probe = imx8mp_dw_hdmi_probe,
+ .remove = imx8mp_dw_hdmi_remove,
+ .driver = {
+ .name = "imx8mp-dw-hdmi-tx",
+ .of_match_table = imx8mp_dw_hdmi_of_table,
+ .pm = &imx8mp_dw_hdmi_pm_ops,
+ },
+};
+
+module_platform_driver(imx8mp_dw_hdmi_platform_driver);
+
+MODULE_DESCRIPTION("i.MX8MP HDMI encoder driver");
+MODULE_LICENSE("GPL");
--
2.43.0
next prev parent reply other threads:[~2024-02-03 16:54 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-03 16:52 [PATCH V8 00/12] soc: imx8mp: Add support for HDMI Adam Ford
2024-02-03 16:52 ` [PATCH V8 01/12] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY Adam Ford
2024-02-06 17:34 ` Luca Ceresoli
2024-02-03 16:52 ` [PATCH V8 02/12] phy: freescale: add Samsung " Adam Ford
2024-02-03 17:12 ` Christophe JAILLET
2024-02-04 9:23 ` Dmitry Baryshkov
2024-02-05 8:17 ` Marco Felsch
2024-02-06 3:39 ` Adam Ford
2024-02-06 17:35 ` Luca Ceresoli
2024-02-03 16:52 ` [PATCH V8 03/12] dt-bindings: soc: imx: add missing clock and power-domains to imx8mp-hdmi-blk-ctrl Adam Ford
2024-02-05 19:19 ` Rob Herring
2024-02-03 16:52 ` [PATCH V8 04/12] pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain Adam Ford
2024-02-03 16:52 ` [PATCH V8 05/12] arm64: dts: imx8mp: add HDMI power-domains Adam Ford
2024-02-05 7:26 ` Alexander Stein
2024-02-06 2:25 ` Adam Ford
2024-02-03 16:52 ` [PATCH V8 06/12] arm64: dts: imx8mp: add HDMI irqsteer Adam Ford
2024-02-04 12:00 ` Francesco Dolcini
2024-02-04 14:54 ` Adam Ford
2024-02-05 7:26 ` Alexander Stein
2024-02-03 16:52 ` [PATCH V8 07/12] dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI Adam Ford
2024-02-06 17:35 ` Luca Ceresoli
2024-02-03 16:52 ` [PATCH V8 08/12] drm/bridge: imx: add driver for HDMI TX Parallel Video Interface Adam Ford
2024-02-06 17:06 ` Nathan Chancellor
2024-02-06 18:50 ` Adam Ford
2024-02-06 18:52 ` Nathan Chancellor
2024-02-03 16:52 ` [PATCH V8 09/12] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX Adam Ford
2024-02-05 11:17 ` Neil Armstrong
2024-02-05 19:23 ` Rob Herring
2024-02-06 17:35 ` Luca Ceresoli
2024-02-16 9:05 ` Alexander Stein
2024-02-16 9:37 ` Laurent Pinchart
2024-02-16 11:31 ` Adam Ford
2024-02-16 11:42 ` Alexander Stein
2024-02-03 16:52 ` Adam Ford [this message]
2024-02-06 17:35 ` [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI Luca Ceresoli
2024-02-03 16:52 ` [PATCH V8 11/12] arm64: dts: imx8mp: add HDMI display pipeline Adam Ford
2024-02-05 7:29 ` Alexander Stein
2024-02-03 16:52 ` [PATCH V8 12/12] arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module Adam Ford
2024-02-05 11:19 ` (subset) [PATCH V8 00/12] soc: imx8mp: Add support for HDMI Neil Armstrong
2024-02-06 8:15 ` Neil Armstrong
2024-02-15 15:05 ` Joao Paulo Goncalves
2024-03-25 21:48 ` Tommaso Merciai
2024-03-25 22:03 ` Laurent Pinchart
2024-03-26 7:46 ` Tommaso Merciai
2024-03-26 11:43 ` Adam Ford
2024-03-26 12:00 ` Tommaso Merciai
2024-10-25 8:05 ` imx8mp: HDMI display blank/black problems mailinglist1
2024-10-30 9:01 ` Frieder Schrempf
2024-10-30 17:28 ` Adam Ford
2024-10-30 20:20 ` Saravana Kannan
2025-03-19 7:52 ` Frieder Schrempf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240203165307.7806-11-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=airlied@gmail.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=andrzej.hajda@intel.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@pengutronix.de \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.stach@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=luca.ceresoli@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marex@denx.de \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=rfoss@kernel.org \
--cc=richard.leitner@skidata.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tzimmermann@suse.de \
--cc=ulf.hansson@linaro.org \
--cc=victor.liu@nxp.com \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).