[PATCH v2 2/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set names for i2c hid nodes

[Anton Bambura <jenneron@postmarketos.org>]

Set names, so they correspond to devices connected to these interfaces.

Signed-off-by: Anton Bambura <jenneron@postmarketos.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 49b740c54674..af61acf58d68 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -362,7 +362,7 @@ &i2c1 {
 
 	status = "okay";
 
-	hid@10 {
+	touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
 		hid-descr-addr = <0x1>;
@@ -379,7 +379,7 @@ &i2c7 {
 
 	status = "okay";
 
-	hid@5 {
+	keyboard@5 {
 		compatible = "hid-over-i2c";
 		reg = <0x5>;
 		hid-descr-addr = <0x20>;
@@ -387,7 +387,7 @@ hid@5 {
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
 	};
 
-	hid@2c {
+	touchpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
-- 
2.42.0