Re: [PATCH v3 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example

[Dimitri Fedrau <dima.fedrau@gmail.com>]

Am Wed, Feb 07, 2024 at 08:54:57AM +0100 schrieb Javier Carrasco:
> Hi Dimitri,
> 
> On 07.02.24 08:47, Dimitri Fedrau wrote:
> > Add interrupt bindings in example.
> > 
> > Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
> > index 7f6d0f9edc75..5b3f9670fa52 100644
> > --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
> > +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
> > @@ -51,5 +51,7 @@ examples:
> >              compatible = "ti,hdc3021", "ti,hdc3020";
> >              reg = <0x47>;
> >              vdd-supply = <&vcc_3v3>;
> > +            interrupt-parent = <&gpio3>;
> > +            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
> >          };
> >      };
> 
> Did you compile the example? I think this will fail because you don't
> have the include for IRQ_TYPE_EDGE_RISING.
>
Missed that one, thanks. No didn't build the documentation yet. Will do
that.

Best regards,
Dimitri Fedrau