devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Miguel Ojeda <ojeda@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Robin van der Gracht <robin@protonic.nl>,
	Paul Burton <paulburton@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v1 12/15] auxdisplay: ht16k33: Switch to use line display character mapping
Date: Thu,  8 Feb 2024 20:48:10 +0200	[thread overview]
Message-ID: <20240208184919.2224986-13-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20240208184919.2224986-1-andriy.shevchenko@linux.intel.com>

Since line display library supports necessary bits to map the characters
(if required), switch this driver to use that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/auxdisplay/ht16k33.c | 109 +++++++++++------------------------
 1 file changed, 34 insertions(+), 75 deletions(-)

diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index 75c4a8d31642..b104f08252dd 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -87,11 +87,6 @@ struct ht16k33_fbdev {
 
 struct ht16k33_seg {
 	struct linedisp linedisp;
-	union {
-		struct seg7_conversion_map seg7;
-		struct seg14_conversion_map seg14;
-	} map;
-	unsigned int map_size;
 	char curr[4];
 };
 
@@ -135,33 +130,6 @@ static const struct fb_var_screeninfo ht16k33_fb_var = {
 	.vmode = FB_VMODE_NONINTERLACED,
 };
 
-static const SEG7_DEFAULT_MAP(initial_map_seg7);
-static const SEG14_DEFAULT_MAP(initial_map_seg14);
-
-static ssize_t map_seg_show(struct device *dev, struct device_attribute *attr,
-			    char *buf)
-{
-	struct ht16k33_priv *priv = dev_get_drvdata(dev);
-
-	memcpy(buf, &priv->seg.map, priv->seg.map_size);
-	return priv->seg.map_size;
-}
-
-static ssize_t map_seg_store(struct device *dev, struct device_attribute *attr,
-			     const char *buf, size_t cnt)
-{
-	struct ht16k33_priv *priv = dev_get_drvdata(dev);
-
-	if (cnt != priv->seg.map_size)
-		return -EINVAL;
-
-	memcpy(&priv->seg.map, buf, cnt);
-	return cnt;
-}
-
-static DEVICE_ATTR(map_seg7, 0644, map_seg_show, map_seg_store);
-static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store);
-
 static int ht16k33_display_on(struct ht16k33_priv *priv)
 {
 	uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON | priv->blink;
@@ -445,18 +413,20 @@ static void ht16k33_seg7_update(struct work_struct *work)
 	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
 						 work.work);
 	struct ht16k33_seg *seg = &priv->seg;
+	struct linedisp *linedisp = &seg->linedisp;
+	struct linedisp_map *map = linedisp->map;
 	char *s = seg->curr;
 	uint8_t buf[9];
 
-	buf[0] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[0] = map_to_seg7(&map->map.seg7, *s++);
 	buf[1] = 0;
-	buf[2] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[2] = map_to_seg7(&map->map.seg7, *s++);
 	buf[3] = 0;
 	buf[4] = 0;
 	buf[5] = 0;
-	buf[6] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[6] = map_to_seg7(&map->map.seg7, *s++);
 	buf[7] = 0;
-	buf[8] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[8] = map_to_seg7(&map->map.seg7, *s++);
 
 	i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
 }
@@ -466,17 +436,39 @@ static void ht16k33_seg14_update(struct work_struct *work)
 	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
 						 work.work);
 	struct ht16k33_seg *seg = &priv->seg;
+	struct linedisp *linedisp = &seg->linedisp;
+	struct linedisp_map *map = linedisp->map;
 	char *s = seg->curr;
 	uint8_t buf[8];
 
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf);
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 2);
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 4);
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 6);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 0);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 2);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 4);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 6);
 
 	i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
 }
 
+static int ht16k33_linedisp_get_map_type(struct linedisp *linedisp)
+{
+	struct ht16k33_priv *priv = container_of(linedisp, struct ht16k33_priv,
+						 seg.linedisp);
+
+	switch (priv->type) {
+	case DISP_MATRIX:
+		/* not handled here */
+		return -EINVAL;
+
+	case DISP_QUAD_7SEG:
+		INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update);
+		return LINEDISP_MAP_SEG7;
+
+	case DISP_QUAD_14SEG:
+		INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update);
+		return LINEDISP_MAP_SEG14;
+	}
+}
+
 static void ht16k33_linedisp_update(struct linedisp *linedisp)
 {
 	struct ht16k33_priv *priv = container_of(linedisp, struct ht16k33_priv,
@@ -486,6 +478,7 @@ static void ht16k33_linedisp_update(struct linedisp *linedisp)
 }
 
 static const struct linedisp_ops ht16k33_linedisp_ops = {
+	.get_map_type = ht16k33_linedisp_get_map_type,
 	.update = ht16k33_linedisp_update,
 };
 
@@ -677,39 +670,7 @@ static int ht16k33_seg_probe(struct device *dev, struct ht16k33_priv *priv,
 	if (err)
 		return err;
 
-	switch (priv->type) {
-	case DISP_MATRIX:
-		/* not handled here */
-		err = -EINVAL;
-		break;
-
-	case DISP_QUAD_7SEG:
-		INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update);
-		seg->map.seg7 = initial_map_seg7;
-		seg->map_size = sizeof(seg->map.seg7);
-		err = device_create_file(dev, &dev_attr_map_seg7);
-		break;
-
-	case DISP_QUAD_14SEG:
-		INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update);
-		seg->map.seg14 = initial_map_seg14;
-		seg->map_size = sizeof(seg->map.seg14);
-		err = device_create_file(dev, &dev_attr_map_seg14);
-		break;
-	}
-	if (err)
-		return err;
-
-	err = linedisp_register(&seg->linedisp, dev, 4, seg->curr, &ht16k33_linedisp_ops);
-	if (err)
-		goto err_remove_map_file;
-
-	return 0;
-
-err_remove_map_file:
-	device_remove_file(dev, &dev_attr_map_seg7);
-	device_remove_file(dev, &dev_attr_map_seg14);
-	return err;
+	return linedisp_register(&seg->linedisp, dev, 4, seg->curr, &ht16k33_linedisp_ops);
 }
 
 static int ht16k33_probe(struct i2c_client *client)
@@ -794,8 +755,6 @@ static void ht16k33_remove(struct i2c_client *client)
 	case DISP_QUAD_7SEG:
 	case DISP_QUAD_14SEG:
 		linedisp_unregister(&priv->seg.linedisp);
-		device_remove_file(&client->dev, &dev_attr_map_seg7);
-		device_remove_file(&client->dev, &dev_attr_map_seg14);
 		break;
 	}
 }
-- 
2.43.0.rc1.1.gbec44491f096


  parent reply	other threads:[~2024-02-08 18:49 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-08 18:47 [resend, PATCH v1 00/15] auxdisplay: linedisp: Clean up and add new driver Andy Shevchenko
2024-02-08 18:47 ` [PATCH v1 01/15] auxdisplay: img-ascii-lcd: Make container_of() no-op for struct linedisp Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 02/15] auxdisplay: linedisp: Free allocated resources in ->release() Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 03/15] auxdisplay: linedisp: Use unique number for id Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 04/15] auxdisplay: linedisp: Unshadow error codes in ->store() Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 05/15] auxdisplay: linedisp: Add missing header(s) Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 06/15] auxdisplay: linedisp: Move exported symbols to a namespace Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 07/15] auxdisplay: linedisp: Group line display drivers together Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 08/15] auxdisplay: linedisp: Provide struct linedisp_ops for future extension Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 09/15] auxdisplay: linedisp: Add support for overriding character mapping Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 10/15] auxdisplay: linedisp: Provide a small buffer in the struct linedisp Andy Shevchenko
2024-02-12  8:25   ` Robin van der Gracht
2024-02-12 11:50     ` Andy Shevchenko
2024-02-12 16:49       ` Andy Shevchenko
2024-02-13 10:53         ` Robin van der Gracht
2024-02-08 18:48 ` [PATCH v1 11/15] auxdisplay: ht16k33: Move ht16k33_linedisp_ops down Andy Shevchenko
2024-02-08 18:48 ` Andy Shevchenko [this message]
2024-02-08 18:48 ` [PATCH v1 13/15] auxdisplay: ht16k33: Use buffer from struct linedisp Andy Shevchenko
2024-02-08 18:48 ` [PATCH v1 14/15] dt-bindings: auxdisplay: Add Maxim MAX6958/6959 Andy Shevchenko
2024-02-09  8:02   ` Krzysztof Kozlowski
2024-02-09 13:59     ` Andy Shevchenko
2024-02-12  8:24       ` Krzysztof Kozlowski
2024-02-08 18:48 ` [PATCH v1 15/15] auxdisplay: Add driver for MAX695x 7-segment LED controllers Andy Shevchenko
  -- strict thread matches above, loose matches on Subject: below --
2024-02-08 16:58 [PATCH v1 00/15] auxdisplay: linedisp: Clean up and add new driver Andy Shevchenko
2024-02-08 16:58 ` [PATCH v1 12/15] auxdisplay: ht16k33: Switch to use line display character mapping Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240208184919.2224986-13-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ojeda@kernel.org \
    --cc=paulburton@kernel.org \
    --cc=robh@kernel.org \
    --cc=robin@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).