[PATCH v2 07/15] auxdisplay: linedisp: Group line display drivers together

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

For better usability group the line display drivers together in Kconfig
and Makefile.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/auxdisplay/Kconfig  | 32 ++++++++++++++++----------------
 drivers/auxdisplay/Makefile | 12 ++++++------
 2 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index d944d5298eca..a34a9a52158f 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -25,12 +25,6 @@ config CHARLCD
 	  This is some character LCD core interface that multiple drivers can
 	  use.
 
-config LINEDISP
-	tristate "Character line display core support" if COMPILE_TEST
-	help
-	  This is the core support for single-line character displays, to be
-	  selected by drivers that use it.
-
 config HD44780_COMMON
 	tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST
 	select CHARLCD
@@ -52,6 +46,16 @@ config HD44780
 	  kernel and started at boot.
 	  If you don't understand what all this is about, say N.
 
+config LCD2S
+	tristate "lcd2s 20x4 character display over I2C console"
+	depends on I2C
+	select CHARLCD
+	help
+	  This is a driver that lets you use the lcd2s 20x4 character display
+	  from Modtronix engineering as a console output device. The display
+	  is a simple single color character display. You have to connect it
+	  to an I2C bus.
+
 config KS0108
 	tristate "KS0108 LCD Controller"
 	depends on PARPORT_PC
@@ -153,6 +157,12 @@ config CFAG12864B_RATE
 	  If you compile this as a module, you can still override this
 	  value using the module parameters.
 
+config LINEDISP
+	tristate "Character line display core support" if COMPILE_TEST
+	help
+	  This is the core support for single-line character displays, to be
+	  selected by drivers that use it.
+
 config IMG_ASCII_LCD
 	tristate "Imagination Technologies ASCII LCD Display"
 	depends on HAS_IOMEM
@@ -177,16 +187,6 @@ config HT16K33
 	  Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
 	  LED controller driver with keyscan.
 
-config LCD2S
-	tristate "lcd2s 20x4 character display over I2C console"
-	depends on I2C
-	select CHARLCD
-	help
-	  This is a driver that lets you use the lcd2s 20x4 character display
-	  from Modtronix engineering as a console output device. The display
-	  is a simple single color character display. You have to connect it
-	  to an I2C bus.
-
 config ARM_CHARLCD
 	bool "ARM Ltd. Character LCD Driver"
 	depends on PLAT_VERSATILE
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 6968ed4d3f0a..43bad850481c 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -5,12 +5,12 @@
 
 obj-$(CONFIG_CHARLCD)		+= charlcd.o
 obj-$(CONFIG_HD44780_COMMON)	+= hd44780_common.o
-obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
+obj-$(CONFIG_HD44780)		+= hd44780.o
+obj-$(CONFIG_LCD2S)		+= lcd2s.o
 obj-$(CONFIG_KS0108)		+= ks0108.o
 obj-$(CONFIG_CFAG12864B)	+= cfag12864b.o cfag12864bfb.o
-obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
-obj-$(CONFIG_HD44780)		+= hd44780.o
-obj-$(CONFIG_HT16K33)		+= ht16k33.o
-obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
-obj-$(CONFIG_LCD2S)		+= lcd2s.o
 obj-$(CONFIG_LINEDISP)		+= line-display.o
+obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
+obj-$(CONFIG_HT16K33)		+= ht16k33.o
+obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
+obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
-- 
2.43.0.rc1.1.gbec44491f096