[PATCH 0/4] Use reg instead of ti,bit-shift for clksel

[Tony Lindgren <tony@atomide.com>]

Hi all,

This series updates the clksel clocks to use the standard reg property
instead of ti,bit-shift.

I'd like to apply these before we make further use of the clksel clocks
to reduce the dtb check warnings.

Regards,

Tony

Tony Lindgren (4):
  clk: ti: Handle possible address in the node name
  clk: ti: Improve clksel clock bit parsing for reg property
  ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
  ARM: dts: omap3: Update clksel clocks to use reg instead of
    ti,bit-shift

 arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi  |  39 +-
 arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi  |  18 +-
 .../boot/dts/ti/omap/omap3430es1-clocks.dtsi  |  52 +-
 .../dts/ti/omap/omap34xx-omap36xx-clocks.dtsi |  86 +--
 ...map36xx-am35xx-omap3430es2plus-clocks.dtsi |  28 +-
 .../arm/boot/dts/ti/omap/omap36xx-clocks.dtsi |   7 +-
 .../omap/omap36xx-omap3430es2plus-clocks.dtsi |  46 +-
 .../arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi | 510 +++++++++---------
 drivers/clk/ti/apll.c                         |  11 +-
 drivers/clk/ti/clk.c                          |  71 ++-
 drivers/clk/ti/clock.h                        |   1 +
 drivers/clk/ti/divider.c                      |   5 +-
 drivers/clk/ti/gate.c                         |   9 +-
 drivers/clk/ti/interface.c                    |   4 +-
 drivers/clk/ti/mux.c                          |   6 +-
 include/linux/clk/ti.h                        |   3 +
 16 files changed, 491 insertions(+), 405 deletions(-)

-- 
2.43.1